PDA

View Full Version : Help - SE C702 disconnected right after connected to TEMS Inv



cdmahn
2010-05-20, 06:30 PM
Hi,

It was very strange that my TEMS SE C702 cannot connect to TEMS Inv. In fact, it connects to TEMS Inv first, but is disconneted right after that (about 5s). I've tried to use different UEDescription.xml, but it still was error.

Could someone here give me help? Thanks in advance.

fotondiamond
2010-05-27, 07:13 AM
One reason fro sudden disconnect is "USB root Hub" problem
see that this fix your problem:

Device Manager> Universal Serial Bus> USB Root Hub
Right Click on all USB Root Hub & select "Properties"
Then in "Power Management " Tab, uncheck "allow computer to Turn Off this device...."

One mroe: Which verison of Inv you use?

BR//
Foton

cdmahn
2010-05-27, 08:21 PM
One reason fro sudden disconnect is "USB root Hub" problem
see that this fix your problem:

Device Manager> Universal Serial Bus> USB Root Hub
Right Click on all USB Root Hub & select "Properties"
Then in "Power Management " Tab, uncheck "allow computer to Turn Off this device...."

One mroe: Which verison of Inv you use?

BR//
Foton

Thanks Dude, I've tried but it still errors.

Are there any other recommends?

fotondiamond
2010-06-04, 09:37 AM
Change your Cable.

Which version of TEMS inv you use?

BR//
Foton

cdmahn
2010-06-04, 10:58 AM
The cable is not problem, because I have used 3 different ones.

I use TEMS Inv 9.0.2 version (thanks Parto)

papaguz
2010-07-01, 04:07 PM
Hi Guys..I have the same problem. C702 disconnects after 5sec. Also, in the version 9 that I have, I don't see C702 in the device list, so I use Z750 or K800 to connect. It connects, but again it disconnects afterwards.

Any thoughts from the expert would be greatly appreciated.:)

grid666
2010-07-01, 04:09 PM
Hi Guys..I have the same problem. C702 disconnects after 5sec. Also, in the version 9 that I have, I don't see C702 in the device list, so I use Z750 or K800 to connect. It connects, but again it disconnects afterwards.

Any thoughts from the expert would be greatly appreciated.:)


It is a well known fact C702 not work ok in TI 9.x

It works with T I 10.xx perfect though

papaguz
2010-07-01, 04:40 PM
ok thanks. It is odd though because in the list of connectibles, C702 is included but not in the actual device list in TI 9.x. Thanks again.

mayank_shah
2010-07-01, 06:36 PM
I am using C702 with Tems 9.0 and its working nice not having any issues..

i am using since 4 Months and never got complaint about disconnecting

grid666
2010-07-01, 07:18 PM
I am using C702 with Tems 9.0 and its working nice not having any issues..

i am using since 4 Months and never got complaint about disconnecting


Then you are one of lucky guys :-)


As c702 is not even on list of supported handsets for TI 9x

fotondiamond
2010-07-09, 08:30 AM
C702 is supported officially in version 9.1.0
Then better to switch 9.1.0 or higher.

BR//
Foton