PDA

View Full Version : HP E6452C RS-232


vedudis
2010-05-05, 03:38 PM
How to configure the Agilent E6452C to DELL?
Agilent E6452C works only on HP?

Help configure DELL to work:
- E6474A ver. 15.0 (software),
- E6452 CDMA800 Digital Receiver (Hardware).
crisnspro
2011-08-22, 05:14 PM
How to configure the Agilent E6452C to DELL?
Agilent E6452C works only on HP?

Help configure DELL to work:
- E6474A ver. 15.0 (software),
- E6452 CDMA800 Digital Receiver (Hardware).

all the PC is same , connet the RS-232 port
carver
2011-08-22, 10:32 PM
also intresting.

my frends also use old HP with real RS232 port,
so if anybody test Receiver with USB-RS232 - it's very intresting.
kylzs
2011-08-30, 06:12 PM
If your PC does not have an RS-232 serial port you can use a serial toUSB convertor. JDSU recommends the Digi Edgeport/1 (USB/4-portRS-232 Interface Module)1. When using other USB interface models,ensure that they support HS serial communication.
kylzs
2011-08-30, 07:10 PM
I just use the E6462C,it can certenly use with the angilet E6473b USB HUB RS232 port,AND CAN CONNECT WITH A PCMCIA RS232 port.BUT CANT CONNECT with any usb to RS232 port I have.I dont know why cant?but in book,it say:When using other USB interface models,ensure that they support HS serial communication. i think:HS serial communication is needed.