PESQ IN TEMS INVESTIGATION 8

[planner.rf]

How to test PESQ MOS in tems investigation 8?
If we need any special hardware box, where to get it??

Other tools have a device called MOS box..

Will it support ti8??

[Dimitris_Z]

How to test PESQ MOS in tems investigation 8?
If we need any special hardware box, where to get it??

Other tools have a device called MOS box..

Will it support ti8??

You need special hardware to measure PESQ.
Only Ascom (is the owner of Tems products) can help you, check the following docment in hxxp://www.ascom.us/us-en/aqm.pdf

[planner.rf]

Any more comments on it??

[dadiono]

you can use PESQ tools provide by E*******, it's support for ti8.1 but you needed dongle with installed PESQ tools.

[sevana]

you can use PESQ tools provide by E*******, it's support for ti8.1 but you needed dongle with installed PESQ tools.

Or try alternative methods:

http://www.sevana.fi/voice_quality_testing_measurement_analysis.php

[fotondiamond]

As I know TEMS Investigation supports only AQM box for MOS testing & obtaining it is very hard because:

- hardware module is very expensive
- ASCOM will not sell you if you don't give your original TEMS dongle serial number
- ASCOM will charge you about PESQ License too
- You have to wait to receive hardware module too

BR//
Foton

[sevana]

As I know TEMS Investigation supports only AQM box for MOS testing & obtaining it is very hard because:

- hardware module is very expensive
- ASCOM will not sell you if you don't give your original TEMS dongle serial number
- ASCOM will charge you about PESQ License too
- You have to wait to receive hardware module too

BR//
Foton

That's right, all of this makes any PESQ containing system very expensive, but what makes it impossible to use alternative perceptual models to be applied in the systems requiring voice quality assessment?