Connect TEMS T610 phone via bluetooth

[shahram]

Do anybody has any idea about connecting TEMS T610 phone to Investigation via bluetooth?

BR

[AlexSSS]

I can connect T610 on TEMS via bluetooth, its easy. I use BlueSoel, just switch connection to port B. :-)

[shahram]

can you share it AlexSSS,I searched in google but nothing useful!
or give a link please

Do you mean bluesoelil??!

thanks in advance

[ last edit by shahram at 2008-5-12 14:43 ]

[riverstreamer]

Hi
I have such problem in connecting T610 to TI6 via Bluetooth.
I used two versions of BlueSoleil Bluetooth driver too as below:
BlueSoleil_2.3_standard_Release_060728
IVT_BlueSoleil_5.0_for_32bit_OS

But no result.
I can connect phone to notebook on a virtual COM port like COM 11,12,13,17 on Bluetooth connection and keep it connected; but in adding phone to the software(TEMS Investigation); I recieve "Fail" Massage.
It can't be connected. I don't know what the problem is. I'm trying to find a solution for it.
Yours / riverstreamer

[shahram]

@riverstreamer
I used IVT_Bluesoleil_5.0 and got the same error,It can establish a connection at first but it drops when it is trying to connect to TI.

I think this may be the reason: although you have the com port service activated on your (and me) laptop,but there is no com port activation on your T610 handset and therefore there is no TEMS data output on bluetooth to be sent to TI.

any idea AlexSSS??!

BR
Shahram

[ last edit by shahram at 2008-5-12 22:01 ]

[ last edit by shahram at 2008-5-12 22:02 ]

[ last edit by shahram at 2008-5-12 22:04 ]

[AlexSSS]

Do you switch connection to port B ?

[shahram]

switch to port B?
where is this option? on the phone or on the Bluesoleil?

[AlexSSS]

This option on the Bluesoleil, look tuning, there must be two ports on T610 device, A anb B.

[shahram]

sorry AlexSSS,
but I can not see any tuning option here,!!!!!

[riverstreamer]

Hi guys

The connection won't drop if you use Bluesoleil driver. by using general driver, the connection drops after some seconds without exchanging data, but if you use bluesoleil driver, it will keep the connection.
About switching to Port B, this option is not available via Driver; it seems a Manager Program is available, that we can do switching by using that.
if alexSSS can write the exact name of Manager or upload it for us to rapidshar.com, we will be able to use that.
Yours/

[baoshizhi]

唉，英文太差劲了，看不懂。不过应该是用Tems Investigation通过蓝牙连接TEMS T610。我倒是用T618测试过，可以通过蓝牙连接TEMS Investigaiton 5.O的，连接里是有2个串口的，串口A和串口B，串口A好像是语音的，可以测试信号的，串口B好像是数据端口，估计是测试GPRS的，没有试过。但是感觉连接不稳定，很容易中断，不知道是不是我的蓝牙适配器太差了，我的蓝牙适配器当时买来是30元钱，好像。

[riverstreamer]

post by baoshizhi at 2008-5-13 18:03 http://www.5inetop.cn/images/common/back.gif (http://www.5inetop.cn/redirect.php?goto=findpost&pid=13880&ptid=889)
唉，英文太差劲了，看不懂。不过应该是用Tems Investigation通过蓝牙连接TEMS T610。我倒是用T618测试过，可以通过蓝牙连接TEMS Investigaiton 5.O的，连接里是有2个串口的，串口A和串口B，串口A好像是语音的，可以测 ...

嗨
我知道。每个人都有语言和喜欢它。我有另一种语言，和我不喜欢以英语发言，但我们仍希望跟对方。您可以选择中文和其他可以选择法语:-)
我有蓝牙卡在我的笔记本电脑。我曾尝试与原来的驱动程序，然后我试着与 IBV soleil versions 5 , 3, 1.6 。我可以连接串行端口，但 Tems Investigation 不能连接到t610 。
我觉得这是另一个问题。司机 IVT BlueSoleil 1.6 是好的，符合下列详情：
IVT BlueSoleil 1.6 for Windows 98/98SE/ME/2000/XP
IVT Corporation.

[shahram]

@ baoshizhi

By port A and B do you mean send and receive,because when I tried to connect my T610 to TI i could see one port initialized for recieving and the other one for sending.!

BR
Shahram

[riverstreamer]

Could you get good result on trying with T610 via Bluetooth?

[shahram]

no,I can connect via bluthooth to my phone but disconnected immediately.

[davidbrayan]

port A & B,
one is for incoming serial connections,another for out going.
so when you use the port meant for incoming connections,it'll drop or fail.
use only the port meant for outgoing connection.
bluetooth data transfer rate also matters.
t610 got slower data rate while bluetooth v2.0 etc got higher data rates and this may result in improper connection.
if the phone hangs,result dropped connection.
so try using slower bluetooth adapters, v1.0 or similar with slower data rates.
dont use multiple connections,like 2 or more mobiles at the same time.
select the port in TEMS investigation to connect to T610 which is meant for outgoing connections.
adjust baud rate of bluetooth serial port accordingly using windows device manager.
check try to reconnect after disconnect in TEMS investigation connection window.
using bluetooth gives you some mobility but you need to attach charger to the phone as it drains out the battery pretty soon.
i used this few years back and that was quite nice being wirefree.