View Full Version : How to make (Reg/dng file for HASP/HASP HL dmp file
aosan
2010-03-06, 04:21 AM
Dear all,
please I need your help to guide me How to make (Reg file) or (dng file) from HASP/HASP HL (dmp file) as I tried to make (dng file from HASP/HASP HL (dmp file) ) using Edgespro.exe but with out succeeded :L. and about Reg file, I still dont know how to make it.:o:
Thanks in advance for your support and effort
bassem_16
2010-03-06, 04:24 AM
http://www.finetopix.com/showthread.php?t=2209
aosan
2010-03-06, 06:21 AM
http://www.finetopix.com/showthread.php?t=2209
Hi Bassem,
after I made the Reg file and starting launched my program, I got this error below.
Error 23: Requested encryption algorithm not supported. Maybe a HSAP4 Key connected?
please can you help. Thanks for that
bassem_16
2010-03-06, 07:00 AM
I'm not sure about the message,
if you successfully made the reg file, I believe you merged it with registry and run install/re-install and your key was found and installed correctly right?
did you try to unplug your dongle and try to read it again and make sure that it has the same password as the original dongle ?
and also Are you sure your dongle is a HASP HL key not a HASP key ?
Check attached tool
BR
Bassem
aosan
2010-03-06, 08:33 AM
I'm not sure about the message,
if you successfully made the reg file, I believe you merged it with registry and run install/re-install and your key was found and installed correctly right?
did you try to unplug your dongle and try to read it again and make sure that it has the same password as the original dongle ?
and also Are you sure your dongle is a HASP HL key not a HASP key ?
Check attached tool
BR
Bassem
Yes, I did al of these but still the same thing.
you can see from the HASP Reader below that the diff between the emulated HASP and the Original One is this (&REV_0321). what do you think the problem and by the way this dongle is for the Pilot Pioneer drive test tool.
------ start here -------
Aladdin USB dongle; HASP/HARDLOCK; USB\VID_0529&PID_0001 (copy one)
Aladdin USB dongle; HASP/HARDLOCK; USB\VID_0529&PID_0001&REV_0321 (Original one)
---------- end ----------
gsmman2006
2010-03-06, 05:03 PM
Hi
this is Uni****ToReg.rar
aosan
2010-03-06, 06:53 PM
Hi
this is Uni****ToReg.rar
Thanks man, i had used this tool as well but i still have this problem.
do we have any other tool to change the dum file to Reg for HASP HL?
bassem_16
2010-03-06, 07:21 PM
Can you please post the registry content ?
aosan
2010-03-06, 10:09 PM
Can you please post the registry content ?
here you go. pls, find the attached Reg below
流星1978
2010-03-08, 10:16 AM
here you go. pls, find the attached Reg below
dingli?if u want to emu this soft,use mutilkey emu pls,this soft need dtable。
aosan
2010-03-11, 04:10 AM
dingli?if u want to emu this soft,use mutilkey emu pls,this soft need dtable。
I did bro, but still not working. pls, can you help?
bassem_16
2010-03-11, 05:36 AM
I'm not quite sure, but maybe the &REV_0321 refers to HASP HL v3.21
if this is the case then you are having a HASP SRM dongle which means no emulator or free solution available for this one for the moment
kp0cha
2010-03-11, 08:07 AM
here you go. pls, find the attached Reg below
no logro descargar los archivos. Cual es el problema.
kp0cha
2010-03-11, 08:15 AM
I'm not sure about the message,
if you successfully made the reg file, I believe you merged it with registry and run install/re-install and your key was found and installed correctly right?
did you try to unplug your dongle and try to read it again and make sure that it has the same password as the original dongle ?
and also Are you sure your dongle is a HASP HL key not a HASP key ?
Check attached tool
BR
Bassem
i dondt have download file
bassem_16
2010-03-11, 05:33 PM
Hello Kp0cha
use the following link
http://www.4shared.com/file/238795453/83cf6eca/Read_Hasp.html
sataron
2010-03-11, 09:39 PM
at first - add to reg file string:
"DongleType"=dword:00000001
at second... try change "Type"=dword:000000DA to "Type"=dword:000000EA
and if u have hasp hl key - u must build Q/A tables for sucsessful run :)
aosan
2010-03-12, 03:02 AM
at first - add to reg file string:
"DongleType"=dword:00000001
at second... try change "Type"=dword:000000DA to "Type"=dword:000000EA
and if u have hasp hl key - u must build Q/A tables for sucsessful run :)
Hi sataron,
I tried your way, the programe now can find the HASP but with this error below
please, how I can build Q/A tables ?
Thanks
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.