kocoman
2010-01-29, 09:19 AM
Should Telus take down the EVDO network for this vulnerability?
See thread:
http://img16.images****.us/img16/6897/1noesnneededforevdo.th.png (http://img16.images****.us/i/1noesnneededforevdo.png/)
http://img121.images****.us/img121/999/whatismyuatinotpermanen.th.png (http://img121.images****.us/i/whatismyuatinotpermanen.png/)
What you need:
1. Inactive EVDO phone or inactive EVDO data card that you don’t plan to sell/reuse anymore. (used on any network, does not have to be Telus) (to prove the concept) (could also work with “active” for the more experienced, data account sharing etc later on if success.)
2. Good EV coverage, ie: does not drop back to 1X (or know how to force EV in the NV settings)
3. Must have tried successfully with #777 with tethering the phone in the past (easier with data cards)
4. “A Telus EVDO PRL” if not getting a EV icon, or was provisioned on other networks, ie: USA, Bell
5. Your SPC/MSL
6. Know how to connect your phone with QPST/Qualcomm (ie: not Nokia)
7. An active account (with Telus or Koodo) with a EVDO phone on it, ie: prepaid, smartphone, datacard, friend to share/enemy to kick out/stranger’s from OTA scans. You need their phone# and EVDO ESN (It does not work with 3G+ or MEID or 1X)
8. Copy down your existing settings. AN, Um, M.IP, NAI. In qpst
9. Willing to risk loss something and not blame me!!!
1. Open up QPST Configuration, then make sure the “Diag” port gets detected by it.
2. Open “Service Programming”
3. Read from phone, enter MSL
4. Go to the PPP Config Tab, then Um
5. Copy down the “User ID” phone@microbrowser.telusmobility.com and save it somewhere.
6. Do step 4 again, but with the AN tab
7. Now go back to the Um tab, then depending on your network/phone config (trial and error)
If your active account is Telus prepaid: (free) – also for regular accounts with WAP, smartphones, etc
phone@microbrowser.telusmobility.com or phone@mb.telusmobility.com for Treo 700p/755p
If your active account is koodo (free)
phone@par.telusmobility.com
If you want to use “tethering” charges (ie: have data card plan)
phone@1x.telusmobility.com
8. Enter one of the above in the user ID.
9. For the password, it’s ALL the 11 digit of the ESN of that account in DECIMAL – check it in eCare (you have to include the zero if necessary)
10. Repeat for the AN tab
11. Now go to the M.IP tab
12. Double click on the “enabled” profile. (There should only be one “enabled”)
13. Copy down the NAI settings to somewhere.
14. In the NAI field, enter the user ID in step 8
15. The Tethered NAI should be blank
16. The AAA shared secret, click on Enter Text String button.
17. Then enter the ESN from step 9
18. You could also fill in the HA, but Telus does not use MIP usually.
19. Save settings to phone
20. Try connecting with #777. Not sure if WAP portals would work.
21. If not work, make sure the PRL is Telus (Bell would work too for free roaming in Eastern Canada, but not sure about Western Canada)
Its so many steps and without pictures, but a reference for someone who want to try it then report back. Its not for n00b.
See thread:
http://img16.images****.us/img16/6897/1noesnneededforevdo.th.png (http://img16.images****.us/i/1noesnneededforevdo.png/)
http://img121.images****.us/img121/999/whatismyuatinotpermanen.th.png (http://img121.images****.us/i/whatismyuatinotpermanen.png/)
What you need:
1. Inactive EVDO phone or inactive EVDO data card that you don’t plan to sell/reuse anymore. (used on any network, does not have to be Telus) (to prove the concept) (could also work with “active” for the more experienced, data account sharing etc later on if success.)
2. Good EV coverage, ie: does not drop back to 1X (or know how to force EV in the NV settings)
3. Must have tried successfully with #777 with tethering the phone in the past (easier with data cards)
4. “A Telus EVDO PRL” if not getting a EV icon, or was provisioned on other networks, ie: USA, Bell
5. Your SPC/MSL
6. Know how to connect your phone with QPST/Qualcomm (ie: not Nokia)
7. An active account (with Telus or Koodo) with a EVDO phone on it, ie: prepaid, smartphone, datacard, friend to share/enemy to kick out/stranger’s from OTA scans. You need their phone# and EVDO ESN (It does not work with 3G+ or MEID or 1X)
8. Copy down your existing settings. AN, Um, M.IP, NAI. In qpst
9. Willing to risk loss something and not blame me!!!
1. Open up QPST Configuration, then make sure the “Diag” port gets detected by it.
2. Open “Service Programming”
3. Read from phone, enter MSL
4. Go to the PPP Config Tab, then Um
5. Copy down the “User ID” phone@microbrowser.telusmobility.com and save it somewhere.
6. Do step 4 again, but with the AN tab
7. Now go back to the Um tab, then depending on your network/phone config (trial and error)
If your active account is Telus prepaid: (free) – also for regular accounts with WAP, smartphones, etc
phone@microbrowser.telusmobility.com or phone@mb.telusmobility.com for Treo 700p/755p
If your active account is koodo (free)
phone@par.telusmobility.com
If you want to use “tethering” charges (ie: have data card plan)
phone@1x.telusmobility.com
8. Enter one of the above in the user ID.
9. For the password, it’s ALL the 11 digit of the ESN of that account in DECIMAL – check it in eCare (you have to include the zero if necessary)
10. Repeat for the AN tab
11. Now go to the M.IP tab
12. Double click on the “enabled” profile. (There should only be one “enabled”)
13. Copy down the NAI settings to somewhere.
14. In the NAI field, enter the user ID in step 8
15. The Tethered NAI should be blank
16. The AAA shared secret, click on Enter Text String button.
17. Then enter the ESN from step 9
18. You could also fill in the HA, but Telus does not use MIP usually.
19. Save settings to phone
20. Try connecting with #777. Not sure if WAP portals would work.
21. If not work, make sure the PRL is Telus (Bell would work too for free roaming in Eastern Canada, but not sure about Western Canada)
Its so many steps and without pictures, but a reference for someone who want to try it then report back. Its not for n00b.