davidbrayan
2009-12-25, 12:25 PM
Hi all,
i tried using TECHMODE in sony e******* Aino , U10.
the code to start TECHMODE is
*585*1234#
or *585*0000#
the last four digits before # are passcode for TECHMODE so it depends on the passcode the TECHMODE has.
press call button to activate and a reboot can deactivate it.
also the TECHMODE may not be enabled in the phone by default which may require customization or flashing.
to enable TECHMODE , use this .
<network>
<service-mode>cs-and-ps</service-mode>
<remove-preferred-data-service-menu>false</remove-preferred-data-service-menu>
<remove-preferred-sms-bearer-menu>false</remove-preferred-sms-bearer-menu>
<enable-long-network-names>false</enable-long-network-names>
<disable-spn-rel4>true</disable-spn-rel4>
<special-periodic-search>true</special-periodic-search>
<eons-precedence-over-spn>true</eons-precedence-over-spn>
<techmode-enabled>true</techmode-enabled>
<techmode-passcode>1234</techmode-passcode>
<techmode-internetbutton>false</techmode-internetbutton>
</network>
now my phone says TECHMODE started after i insert the code but nothing happens after that.
it stays in running applications but no TECHMODE display.
something someone would like to say to get the tests available.
BR
db
i tried using TECHMODE in sony e******* Aino , U10.
the code to start TECHMODE is
*585*1234#
or *585*0000#
the last four digits before # are passcode for TECHMODE so it depends on the passcode the TECHMODE has.
press call button to activate and a reboot can deactivate it.
also the TECHMODE may not be enabled in the phone by default which may require customization or flashing.
to enable TECHMODE , use this .
<network>
<service-mode>cs-and-ps</service-mode>
<remove-preferred-data-service-menu>false</remove-preferred-data-service-menu>
<remove-preferred-sms-bearer-menu>false</remove-preferred-sms-bearer-menu>
<enable-long-network-names>false</enable-long-network-names>
<disable-spn-rel4>true</disable-spn-rel4>
<special-periodic-search>true</special-periodic-search>
<eons-precedence-over-spn>true</eons-precedence-over-spn>
<techmode-enabled>true</techmode-enabled>
<techmode-passcode>1234</techmode-passcode>
<techmode-internetbutton>false</techmode-internetbutton>
</network>
now my phone says TECHMODE started after i insert the code but nothing happens after that.
it stays in running applications but no TECHMODE display.
something someone would like to say to get the tests available.
BR
db