View Full Version : Ask for help!
Hannibal
2009-11-30, 09:52 PM
As the picture shows,the cell can't be shown on the map,why?:(
Actix v4.05.175.140
The ***** i've be used is here:
http://www.finetopix.com/showthread.php?t=6188
Hannibal
2009-11-30, 09:57 PM
BTW,i've tried Actix v4.05.191.611
Same problem....
(cellrefs.txt is OK)
justdream
2009-11-30, 10:28 PM
it's related to your cellref, so upload it here so we can check what's the problem?
good luck
xcatas
2009-11-30, 10:35 PM
hi hannibal
have you try to zoom in to the sites?
i'm also facing that problem, but after I zoom in a few times, the sites appear normally.
hope you can solve ur problem.
thanks
liana
2009-12-01, 01:15 AM
good advice...or u shud upload ur cellref for analysis.
thanks
Hannibal
2009-12-01, 11:25 AM
cellrefs.txt and the original cell database(temp.txt) are coming.
Now i can see 6 points on the map.
peuss
2009-12-01, 02:44 PM
hi all,
im new bie here:D.. what is cellref?
da_manole
2009-12-01, 03:33 PM
hi all,
im new bie here:D.. what is cellref?
In Analyzer, network configuration information (such as the names, IDs, and locations of the cell sites, etc.) is stored in a text file that is called the CellRefs file.
Hannibal
2009-12-01, 08:44 PM
I've solved this problem.There are some mistakes in my cell database.
Thx a lot:)
xcatas
2009-12-01, 09:10 PM
congratz friend :)
btw, what's the problem?
could you share it with us?
jugo.noer
2009-12-09, 05:03 PM
I've solved this problem.There are some mistakes in my cell database.
Thx a lot:)
hi Hannibal,
could you share the solve. I face the same case..
athosco
2009-12-27, 01:49 AM
Hi friends
does anyone have a sample on GSM Cellrefs ?
I've tried to fill the file my self with original data but the ACTIX shows only the sites on map but not the cells (sectors) I dont know why ?
any suggests
xcatas
2010-01-03, 05:09 AM
@asthosco
what actix version you use?
have you configured the cell in the Sites/Cell Properties Icon in Map window?
If not, click it (one with Cell Sites text with mouse hover)
then choose GSM_Cell in "Series:" box.
Choose anything you like except "none" for both "Cell Color" and "Cell Size" (e.g BCCH and Site_Name)
then click OK.
this is a sample GSM cellfile for you.
sorry if my english is bad
thanks
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.