View Full Version : Import driver test data to Atoll???
liukang
2009-09-29, 03:03 AM
Hi all, anyone can help me import driver test data to Atoll to calibrate propagation model???
Thanks and BR!!!:rolleyes:
nabil el haddani
2009-09-29, 04:05 AM
Hi man,
The Procedure for importing DT on atoll :
– Standard import as in Excel
– Mandatory information
Position of measurement points
ID of Active set members or ID of Scanned cells
– You can import any additional information related to measurement
points
– Definition and storage of import configurations
– Multiple import can be done by selecting several files.
plz find enclosed Atoll Model Calibration guide from Atoll support, in chapter 4.1.2 u will find the details step by step how to import CW measurements to ure Atoll map as follows:
Importing a CW Measurement Path
Importing Several CW Measurement Paths
Creating a CW Measurement Import Configuration
Defining the Display of CW Measurements
Best Regards
Nab
secretagentx2
2009-10-06, 02:04 PM
Hi man,
The Procedure for importing DT on atoll :
– Standard import as in Excel
– Mandatory information
Position of measurement points
ID of Active set members or ID of Scanned cells
– You can import any additional information related to measurement
points
– Definition and storage of import configurations
– Multiple import can be done by selecting several files.
plz find enclosed Atoll Model Calibration guide from Atoll support, in chapter 4.1.2 u will find the details step by step how to import CW measurements to ure Atoll map as follows:
Importing a CW Measurement Path
Importing Several CW Measurement Paths
Creating a CW Measurement Import Configuration
Defining the Display of CW Measurements
Best Regards
Nab
Good share.
Has anyone ever used Scan mode TEMS DT logs in Atoll for Model Tuning? I have DT of a cluster in Scan mode to fine tune the current Propagation Model. Clutter morphology is Urban.
How much accurate is its results for calibration as compared to CW measurements?:confused:
petro
2009-10-17, 10:10 PM
Good post. Thanks for sharing!
fellucia811
2009-10-18, 02:29 AM
Hi man,
The Procedure for importing DT on atoll :
– Standard import as in Excel
– Mandatory information
Position of measurement points
ID of Active set members or ID of Scanned cells
– You can import any additional information related to measurement
points
– Definition and storage of import configurations
– Multiple import can be done by selecting several files.
plz find enclosed Atoll Model Calibration guide from Atoll support, in chapter 4.1.2 u will find the details step by step how to import CW measurements to ure Atoll map as follows:
Importing a CW Measurement Path
Importing Several CW Measurement Paths
Creating a CW Measurement Import Configuration
Defining the Display of CW Measurements
Best Regards
Nab
Is it possible to upload this file somewhere else?
Thanks in advance!
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.