UE testing test cases

[auto_art]

Hello Folks

does anyone have information on what sort of UE testing cases are done on a UE? assume you get a new UE and what test cases you would perform to certify the UE to conclude the UE is good for the network?

Kindly please share if you have any inputs.

I can think of

attach
detach
idle and dedicated mobility
UE inactivity and wakeup
TAC update
.
.
.

[anthum]

You can check the following

UE is camping or not
Stability
Volte Call
CSFB Call
SMS Test
SRVCC
Throughput Testing
Handovers

[arian.jumaa]

1. RF TEST
R0 : Receiver Sensitivity Test
R1 : Antenna Gain Check Test
R2 : MiFi Antenna Directivity Test
R3 : Modulation Performance Test
R4 : Uplink And Downlink Speed Test
R5 : Continuous Connectivity Test
R6 : MiFi Neighboring Check Test During Connectivity
R7 : MiFi Connection Setup Test
R8 : MiFi Testing At Problem Area
R9 : MiFi Handover Testing
R10 : MiFi Performance Test During Interference


2. WIFI TESTING
W1: WiFi Range Test
W2: Testing WiFi Interference
W3: Analyzing Data Of WiFi Device
W4: MiFi Performance During Load


4. PERFORMANCE AND RELIABILITY
P1 : MiFi Continuous Download Test
P2 : VOIP Compliance Test
P3 : Ping Latency Test
P4 : TM 2/3 Adaptive Switching


5. QoS Test
Q1 : QoS Configuration Support Testing
Q2 : Maximum Throughput – DL/UL non CA
Q3 : Maximum Throughput – DL/UL CA