RET E*****: link RET to cell name

[dannthemann]

Hi colleagues,

I am trying to link RET info with the cell name for E*** LTE cm exports.
In the MO RetSubUnit and parameter electricalAntennaTilt (RetSubUnit.electricalAntennaTilt) you can find the electrical tilt. But no info about the cell name is included in this MO.
Neither I've been able to find any key to correlate this MO with any other to find and link the cell name.

Any help?

Appreciated.

[kvf]

in ENM cli:
cmedit get xxxx RetSubUnit.(electricalAntennaTilt,maxTilt,minTilt,operationalState,userLabel) -t

xxxx - eNodeB name in your network

on the eNodeB command shell:
xxxx> hget RetSubUnit=1 operationalState|electricalAntennaTilt|mintilt|maxtilt|userLabel



Hi colleagues,

I am trying to link RET info with the cell name for E*** LTE cm exports.
In the MO RetSubUnit and parameter electricalAntennaTilt (RetSubUnit.electricalAntennaTilt) you can find the electrical tilt. But no info about the cell name is included in this MO.
Neither I've been able to find any key to correlate this MO with any other to find and link the cell name.

Any help?

Appreciated.

[consultant]

[QUOTE=kvf;283283]in ENM cli:
cmedit get xxxx RetSubUnit.(electricalAntennaTilt,maxTilt,minTilt,operationalState,userLabel,iuantSectorId) -t

For AISG RETs during the initial setup installer has to specify the sector in the iuantSectorId.

BR