PDA

View Full Version : Looking for CPS ********



EACanarias2
2021-04-12, 06:55 AM
Hi all.

I am looking for ******** Tetra CPS or CPS Plus R6x.472.02 for R13.000.5834.

If anyone can help me I will be grateful.

Thanks

Alex

580-Gabor
2021-04-12, 07:04 PM
R6C.472.02 is MR5.6.1 from April 2008.and it is for R13.000.5848.
R13 = ******** MTP850, 380MHz version.

I'm higly recommend upgrade it to FW846x.

All the older softwares are here:
http://cloud.kyme32.ro/ftp_backup/

go to T E T R A S O F T folder then go to TETRA subfolder.

EACanarias2
2021-04-13, 05:31 PM
R6C.472.02 is MR5.6.1 from April 2008.and it is for R13.000.5848.
R13 = ******** MTP850, 380MHz version.

I'm higly recommend upgrade it to FW846x.

All the older softwares are here:
http://cloud.kyme32.ro/ftp_backup/

go to T E T R A S O F T folder then go to TETRA subfolder.

Hi Gabor. Thank you very much for your help.

I am starting to learn about tetra structure. I still have a lot left.

For now, I have a MTP850 and a MTM5400. With the second I have not had any problems, but with the MTP850 yes.

It doesn't go into programming mode and I don't know if it's the fault of the CPS. I still don't know how to upload the firmware to the MTP850.

Again, thank you very much.