SeeGull Assistant don't see my IBflex via ethernet port

[carver]

I set IP at IBflex to 192.168.2.100/255.255.255.255
i set IP at Laptop to 192.168.2.2/255.255.255.255

reboot scanner, ping work OK
Pinging 192.168.2.100 with 32 bytes of data:
Reply from 192.168.2.100: bytes=32 time=4ms TTL=64
Reply from 192.168.2.100: bytes=32 time=2ms TTL=64
Reply from 192.168.2.100: bytes=32 time=2ms TTL=64

i has FULL unit, all licenses enabled, Ethernet/wifi/BT too.
i see scanner from phone via BT.

but SeeGull Assistant 2.2.6.0 don't see my scanner via Ethernet ((

how to fix this ?

thanks/

[Rooster[BG]]

Hi,

Are you sure that your scanner can be connected to SeaGull Assistant through Ethernet?

I've connected IbFlex only through USB cable.

Can't you use USB instead of Ethernet?

Regards,
Rooster[BG]

[carver]

of course USB works. but the scanner is only two years old, and the USB already needs to be re-soldered.
and most importantly, remote work. over ethernet - I can work from 500 km.
that's why I asked my question. Thanks.

[Rooster[BG]]

Hi,

I understand your point of view.

I can't help unfortunately as I've used IBflex only with Nemo products and since they don't offer connectivity through Ethernet I never used such type of connectivity.

Regards,
Rooster[BG]