Entering 477 mode by PEI / command from PC

[AnRegs]

Hi SEPURA guys!

I need to enter 477 mode by command from PC.
It's due to lack of local CH.

VC would be great, but requires special hardware (black box) to work.
Remote Tool doesn't have the keypad.

Any other ways? Like command from terminal?

[oyvse]

Try through sepura sail

[580-Gabor]

*477 = *435
Start Remote UI tool with connected Sepura transceiver and hit F11.

[AnRegs]

*477 = *435
Start Remote UI tool with connected Sepura transceiver and hit F11.
Thanks, it works! Where did you get this hotkey?

[580-Gabor]

:-))

From the Sepura Remote UI tool book:

Duplicates the radio display on a PC using a data cable.
Before you use the software, check that you have:

. A radio which has softkey 5 configured as “display invert”
. A data cable connecting the PC to the radio

If your data cable is connected to any COM port other than COM1 then you must
tell the program by choosing the correct port from the Comm Port menu.

You should notice the screen of the radio invert and then go back to normal.
The window on the PC should now mimic the radio screen.


Supported key combinations
--------------------------

Alt+Enter switches between window and full-screen

'0'-'9', '*', '#', Up, Down, Left Right act as radio keys

Enter, Ins Send (Green key)
Esc, Del Clear (Red key)

Space PTT

Ctrl+Space Latching PTT

Home, 'M' Mode button

PgUp, PdDn Rotary control

F1-F4 Loads alternate palette files (in installed directory)
These are plain text files which may be editted

F11 Sends *435 sequence

F12 Toggles Cyrillic display for pre-v5 software

Ctrl+Shift+F12
Zeroise function (**00##)

'A' Toggles true LCD aspect ratio display correction

's' Saves screenshot bitmap with true aspect ratio in the default
directory (normally the installed directory) in the format
screenshot-YYYYMMDD-NNN.bmp where NNN increments from 001.

'S' Saves screenshot bitmap without aspect ratio correction



Mouse control
-------------

Left button PTT
Right button Mode button
Mouse wheel Rotary control
Extra side buttons Send & Clear


Thats all....