live_energy
2020-03-25, 04:08 PM
•Used Reserved Parameter List: describes the reserved parameters and bits that are being used.
•Disuse Reserved Parameter: describes the reserved parameters and bits that are no longer in use in the current R version or earlier versions.
For example,
NRDUCellRsvd
RsvdParam101
MOD NRDUCELLRSVD
LST NRDUCELLRSVD
None
Indicates the PRB proportion threshold in the downlink power normalization adaptation solution. The valid value range of this parameter is 0 to 1001.
If this parameter is set to 0, the value 0.50 takes effect.
If this parameter is set to a value within the range of 1 to 1000, the value that takes effect is 0.01 to 10.00, with the step of 0.01.
If this parameter is set to 1001, the value 0.00 takes effect.
If this parameter is set to a value greater than 1001, the value 10.00 takes effect.
gNBRsvd
RsvdParam0
MOD GNBRSVD
LST GNBRSVD
None
Indicates the maximum distance supported by the eCPRI/CPRI. The value ranges from 0 to 1. If this parameter is set to 0, the maximum distance supported by the eCPRI/CPRI is 20 km. If this parameter is set to 1, the maximum distance supported by the eCPRI/CPRI is 0.5 km. If this parameter is set to a value not within the range, the value 0 takes effect.
•Disuse Reserved Parameter: describes the reserved parameters and bits that are no longer in use in the current R version or earlier versions.
For example,
NRDUCellRsvd
RsvdParam101
MOD NRDUCELLRSVD
LST NRDUCELLRSVD
None
Indicates the PRB proportion threshold in the downlink power normalization adaptation solution. The valid value range of this parameter is 0 to 1001.
If this parameter is set to 0, the value 0.50 takes effect.
If this parameter is set to a value within the range of 1 to 1000, the value that takes effect is 0.01 to 10.00, with the step of 0.01.
If this parameter is set to 1001, the value 0.00 takes effect.
If this parameter is set to a value greater than 1001, the value 10.00 takes effect.
gNBRsvd
RsvdParam0
MOD GNBRSVD
LST GNBRSVD
None
Indicates the maximum distance supported by the eCPRI/CPRI. The value ranges from 0 to 1. If this parameter is set to 0, the maximum distance supported by the eCPRI/CPRI is 20 km. If this parameter is set to 1, the maximum distance supported by the eCPRI/CPRI is 0.5 km. If this parameter is set to a value not within the range, the value 0 takes effect.