PDA

View Full Version : Question MTM800E flash cable pinout


catopett
2020-01-24, 09:53 AM
Hi, i have a MTM800E and looking for pinout for FLASH CABLE, it has to be for MTM800E as MTM800 is not the same cable.
-bup-
2020-01-24, 08:57 PM
Hi,

MTM700/800/800e share the same rear accessory cables.
catopett
2020-01-25, 05:08 PM
Someone that have the NEWEST FW for MTM800E?
-bup-
2020-01-25, 09:49 PM
Hi,

In March 2014 ******** Solutions declared that the MR5.14.10 Software Release would be the last Feature and Service build for the TETRA generation II Subscribers (aka Patriot).
As part of this declaration an exception case clause was included to allow for any issues that could arise that would be mutually agreed as serious enough to be addressed with a follow on ‘Point Release’.
Since March 2014 ******** Solutions have deployed a number of ‘Point Releases’ that met the exception criteria, culminating in a baseline release designated as MR5.14.10f.
This baseline release has also allowed ‘Point Releases’.

42480
catopett
2020-01-26, 06:14 PM
Why have the MR17 came then?
-bup-
2020-01-26, 11:33 PM
For the newer models (MTP3000/6000/8000Ex/TGP2200/ST7000/7500) and still supported models (MTM5000/MTM800FuG....).

Others are old generation not any more supported.

MTM800E last order date (450MHz model) was around 2014, it's quite old now !

The current Master Release is now MR19.0
catopett
2020-03-13, 11:46 AM
I struggle with DRIVER problem in windows 10, for MTM800E rear usb cable, need data or driver