5G Test UE

[liana]

Hello experts,

Opening a new thread to share 5G NR test UE information.
Please share your experience. It will help many people.

Test UE model, chipset, 5G NR bands, country information are important.
Below is an example.

Samsung Galaxy S10 5G, Exynos, b78, Australia.

BR

[keysightseller]

mate20x5g n41 n77-n79
h112-370 n41 n77-n79
axon10pro5g n41 n77 n78
mix35g n41 n77 n78

[byunkiwo]

Samsung Galaxy S10 5G, Exynos, n78, South KOREA
- 5GNR Release when battery temp over 40℃

LG V50, Qualcomm, n78 , South KOREA

[liana]

Anyone tested any X55 chipset device that supports both NSA & SA type network?

BR

[keysightseller]

Anyone tested any X55 chipset device that supports both NSA & SA type network?

BR

now ,only huawei mate305g mate20x5g huawei cpe h112 support SA network;
X55 don't support

[pathloss]

now ,only huawei mate305g mate20x5g huawei cpe h112 support SA network;
X55 don't support
check here, x55 does support 5G Standalone.
https://www.qualcomm.com/products/snapdragon-x55-5g-modem

Br

[Cepillo]

I need to disable NR/endc on h112-370 to make it endc not capable UE for some testing. Any idea?

[keysightseller]

I need to disable NR/endc on h112-370 to make it endc not capable UE for some testing. Any idea?

means select SA/NSA ?

i have H112-370 on hand
what you need test ?

[justdream]

Dears,
Any idea which mobile model can support 5G NR Carrier Aggregation?

[general.1979]

Dears,
Any idea which mobile model can support 5G NR Carrier Aggregation?

---------------------------here mate20x5g NR ca
supportedBandCombinationList


BandCombination


bandList


nr


bandNR = 41


ca-BandwidthClassDL-NR = a


ca-BandwidthClassUL-NR = a


featureSetCombination = 0


powerClass-v1530 = pc2


BandCombination


bandList


nr


bandNR = 77


ca-BandwidthClassDL-NR = a


ca-BandwidthClassUL-NR = a


featureSetCombination = 0


powerClass-v1530 = pc2


BandCombination


bandList


nr


bandNR = 78


ca-BandwidthClassDL-NR = a


ca-BandwidthClassUL-NR = a


featureSetCombination = 0


powerClass-v1530 = pc2


BandCombination


bandList


nr


bandNR = 79


ca-BandwidthClassDL-NR = a


ca-BandwidthClassUL-NR = a


featureSetCombination = 0


powerClass-v1530 = pc2
-----------------------------------------------------

[eta004]

Anyone tested any X55 chipset device that supports both NSA & SA type network?

BR


One Plus 7 T 5G house X55 chipset
Will be testing this soon

[eta004]

Dears,
Any idea which mobile model can support 5G NR Carrier Aggregation?

Samsung Galaxy S10 5G supports 5G CA - Uses X50 5G chipset
One Plus 7T 5G McLaren Edition supports CA - Uses x55 chipset

[DFTC]

i use ZTE Axon Pro 5G & HTC Hub. (X50)

Done anyone can share adb/diag drivers ?

[dennielone]

Oneplus 5G, , x55m, n71, USA.

[dennielone]

OPPO 5G, , x55m, n78, China

[Cepillo]

Hi, which model supports SRB3?

[dennielone]

Hi, which model supports SRB3?
The same question, till now have not seem SRB3 in live network.

[liana]

Hi, which model supports SRB3?

Galaxy S10 5G, Exynos, n78, Korea

[liana]

42313
Galaxy S10 5G UE capability showing SRB3 supported.

[macro34]

Xiaomi Mi Mix 3 5G
Qualcomm Chipset Snap855
band: n78

location: Germany, Poland

[keysightseller]

huawei mate30 5g support n79/n78/n77/n41/n28/n3/n1 & support SRS
samsung note10+ 5g support n78

[merishi]

Hi everyone! does anyone have adb/diag for Oneplus 7t 5G Mclaren? Not able to gather logs with it.

[Cepillo]

Hello and Happy New Year!
Is there any UE supported eLCID?

[keysightseller]

Hello and Happy New Year!
Is there any UE supported eLCID?

what is eLCID ?
can detailed ？

[bluep]

huawei mate30 5g support n79/n78/n77/n41/n28/n3/n1 & support SRS
samsung note10+ 5g support n78
Can use with Tems ?

[Cepillo]

MAC PDU header field required for Multiple DRB per UE

[Renz]

Xiaomi Mi Mix 3 5G
Qualcomm Chipset Snap855
band: n78

location: Germany, Poland


Xiaomi Mi Mix 3 5G
Does anyone know if this works straight out of the box (i.e. without any HWflashing to temsify)
and work with TEMS.
Qualcomm M(X55) or Qualcomm L(MSM89xx)

[djcad]

Xiaomi Mi Mix 3 5G
Does anyone know if this works straight out of the box (i.e. without any HWflashing to temsify)
and work with TEMS.
Qualcomm M(X55) or Qualcomm L(MSM89xx)

Should work straight out of box with TEMS Investigation & Pocket according to Infovista.
The global fw does not work on all 5G networks

[djcad]

Should work straight out of box with TEMS Investigation & Pocket according to Infovista.
The global fw does not work on all 5G networks

Addition, patched bootloader and root is recommended.
You also need a TEMS token for full usage.
Token can be purchased by Infovista.

Seems this token is required atleast for some licenses.

[Renz]

does anyone have the driver for the on-device Xiaomi mi mix3 5G , or maybe can search for me in the infovista gls portal.
as although i have the license in my tems investigation (M license for the correct chipset SM8150/X50 Qualcomm M) as I have done all the prerequitsites,
enabled ADM and USB tethering ,enabled debugging etc.etc. but it seems the program(tems investigation 21 is looking for an on-device support, a driver i think. when im trying to connect UE-device equipment.

or has anyone come across this before and know what im actually missing

[djcad]

does anyone have the driver for the on-device Xiaomi mi mix3 5G , or maybe can search for me in the infovista gls portal.
as although i have the license in my tems investigation (M license for the correct chipset SM8150/X50 Qualcomm M) as I have done all the prerequitsites,
enabled ADM and USB tethering ,enabled debugging etc.etc. but it seems the program(tems investigation 21 is looking for an on-device support, a driver i think. when im trying to connect UE-device equipment.

or has anyone come across this before and know what im actually missing

Do you have the 5G license for tems investigation aswell?
Seems it's maybe missing the ODM apks, not sure if you must temsify the phone and it may needs to be registered on GLS server aswell.

I will get hand son with those phones with Investigation within two weeks.

[Renz]

Yes, I have 5G license for tems 21 investigation.
When i try manual UE cannection, i with ADM = Air interface, I can see the equipment initialize
but never ready for activation (a red cross over EQ1)
I downloaded the latest drivers from Xiaomi official site, for composite device, but still not initalizing UE properly.
maybe ODM needed, does anyone know

[djcad]

Yes, I have 5G license for tems 21 investigation.
When i try manual UE cannection, i with ADM = Air interface, I can see the equipment initialize
but never ready for activation (a red cross over EQ1)
I downloaded the latest drivers from Xiaomi official site, for composite device, but still not initalizing UE properly.
maybe ODM needed, does anyone know

And the phone is rooted I guess?

I got my devices recently but need to wait for the bootloader unlock (7days :(:(:()

[Renz]

Will be interested to know how you go, as I would go down the unlock bootloader path if i have an OS custom rom to load back into it.

[djcad]

Will be interested to know how you go, as I would go down the unlock bootloader path if i have an OS custom rom to load back into it.

We just plan to have the same fw, but need to unlock bootloader to root the device, maybe that is the problem for you that it does not activate?
We will install TEMS Pocket on them so yet not sure about TEMS Investigation

[Renz]

Xiaomi connection to Tems investigation, What seems to be missing is the Access to the modem in the phone. It says a QXDM Interphase is missing,
I know in a Samsung phone this Interphase can be got when get access to the phone modem,
usually in Samsung S5 at least this is done with *#0808#, Does you or anyone know the similar command for Xiaomi Mi Max3 phone that can give me access to my
Xiaomi modem. Snapdragon 855, SM8150 , I think its uses separate modem X50 internally.

[djcad]

Hi

I have now successfully got my Xiomi Mi Mix 3 5G working with TEMS Pocket and TEMS Investigation.
However, My phone is now temsifed. Before that I had to root the device, maybe there is your problem that it must be rooted?

I found this on XDA-developer but I guess it still needs root.
## QUALCOMM DIAGNOSTIC PORT AND TOOLS
(based on https://forum.xda-developers.com/one...owifi-t3934227 (https://forum.xda-developers.com/oneplus-7-pro/help/force-enable-volte-vowifi-t3934227))

1.1 Download
https://androidfilehost.com/?fid=11410963190603864074
https://androidfilehost.com/?fid=11410963190603912872
QPST_2.7.474.zip
QUD.WIN.1.1 Installer-10037.3 Setup.zip
Just use the standard settings and click on OK, next,

1.2 OPEN DIAGNOSTIC PORT FOR THE SESSION FOR QPST (WINDOWS CMD ADB)
cd C:/adb
adb devices
adb shell
su (you need to add root permisions on android screen)
setprop sys.usb.config diag,serial_cdev,rmnet,adb

1.3 Once The Port is up you can use your Qualcomm Tools.

1.4 For example you can change the VOLTE/VOWIFI settings with PDC Tool
Select your device, right click on "Commercial" and deactivate Sub0 and Sub1
Click on Oversea-Commercial_DS again and click on remove -- DO NOT CLICK REMOVE, JUST DE-ACTIVATE IT - your settings stick after a reboot, so no longer need to remove the profile (at least on my device my profiles stick, also makes it easier to go back to default)


## FORCE ENABLE VOLTE AND VOWIFI BUTTONS IN ANDROID
cd C:/adb
adb devices
adb shell
su (you need to add root permisions on android screen)
setprop persist.dbg.ims_volte_enable 1; setprop persist.dbg.volte_avail_ovr 1; setprop persist.dbg.vt_avail_ovr 1; setprop persist.dbg.wfc_avail_ovr 1


######################## CODES FOR THE DIALER #####################

1. Diagnostic codes:
*#*#6484#*#*
2. Testing
*#*#4636#*#*
3. Calendar
*#*#225#*#*
4. Google Play services
*#*#426#*#*
5. Rlz Debug Ul.
*#*#759#*#*
6. Imei Information
*#06#

Enter these codes into the Dialer to enable the options in Settings. (Settings < SIM Cards & mobile networks < Sim Card Settings < VoLTE Enabled/Make Calls using WLAN) . THEY ARE ENABLED BY DEFAULT

VoLTE *#*#86583#*#*
VoWIFI *#*#869434#*#*

[Renz]

https://1drv.ms/u/s!Ap4NHzZ8l1_1gnSeC-Ald97qFlR1?e=c1LiOJ

what does your Tems status app look like, mine is attached.
usb mode = rndis, none, adb.

I think the apk they want you to load for "ïnstall on device to UE" sets this up, I think that's the problem, im not using pocket, just have investigation basic M licence. can you let me know what your usb mode is on your app Tems Status.

[djcad]

https://1drv.ms/u/s!Ap4NHzZ8l1_1gnSeC-Ald97qFlR1?e=c1LiOJ

what does your Tems status app look like, mine is attached.
usb mode = rndis, none, adb.

I think the apk they want you to load for "ïnstall on device to UE" sets this up, I think that's the problem, im not using pocket, just have investigation basic M licence. can you let me know what your usb mode is on your app Tems Status.


My TEMS Status app looks like below link.
https://drive.google.com/open?id=1EfU5tUh3jGjq5ed4IkEvdBn1AU7iV5JD

MTP,ADB is for TEMS Pocket, for Investigation you need to have RNDIS to access network.
I think one of the main reason is that your phone is not rooted and Investigation can not access the diagnostic interface.
I don't think it is possible to use it "out of the box" as by default the diagnostic interface is locked for access unrooted.

[Renz]

Yes, I think you are correct, im currently in the process of "rooting" phone. Just doing all the reading up on the process and backup, in case something goes wrong.
making sure i have the correct fw rom in backup, in case i need it, as im proceeding with caution,
Thanks for all the help

[djcad]

Yes, I think you are correct, im currently in the process of "rooting" phone. Just doing all the reading up on the process and backup, in case something goes wrong.
making sure i have the correct fw rom in backup, in case i need it, as im proceeding with caution,
Thanks for all the help

Good luck, i used fw and patched bootloader provided by Infovista as our Xiaomi's had the wrong fw.

[djcad]

The new Sony Xperia 1 II seems to be a very good device to use for testing as it supports more bands and 5G SA where Xiaomi Mi Mix 3 only supports n78 and nsa.

[djcad]

According to Infovista TEMS Investigation 22.x will not need to temsify a device etc.

ODM testing on commercial devices
From TEMS Investigation 22.0 it will be possible to measure the network performance seen from commercial devices without requiring them first to be modified (with TEMS firmware). This means that throughput testing of high data speeds in 5G NR networks can be achieved with commercial off the shelf devices.

This feature opens the door for customers to perform data service testing with almost every Android device on the market (not limited by supported chipsets an so on) and makes TEMS Investigation a very powerful choice for 5G testing.

[parto_tegal]

Hi All,
I was tested Samsung Galaxy Note 10+ 5G SM-N976Q, it was working on n41. It's showing UE Capabilities message as on picture, not sure it will work on n78, n260 and n261 or not. Sorry for a blur picture...

Regards,
-pt-

[sak2e]

I'm using it for n78 testing connected to tems. Thanks for sharing


Hi All,
I was tested Samsung Galaxy Note 10+ 5G SM-N976Q, it was working on n41. It's showing UE Capabilities message as on picture, not sure it will work on n78, n260 and n261 or not. Sorry for a blur picture...

Regards,
-pt-

[liana]

Hi All,
I was tested Samsung Galaxy Note 10+ 5G SM-N976Q, it was working on n41. It's showing UE Capabilities message as on picture, not sure it will work on n78, n260 and n261 or not. Sorry for a blur picture...

Regards,
-pt-

It should work on n41, n78, n260, n261. Also check supported ENDC band combination.

BR

[torex]

According to Infovista TEMS Investigation 22.x will not need to temsify a device etc.

ODM testing on commercial devices
From TEMS Investigation 22.0 it will be possible to measure the network performance seen from commercial devices without requiring them first to be modified (with TEMS firmware). This means that throughput testing of high data speeds in 5G NR networks can be achieved with commercial off the shelf devices.

This feature opens the door for customers to perform data service testing with almost every Android device on the market (not limited by supported chipsets an so on) and makes TEMS Investigation a very powerful choice for 5G testing.




is it ony data testing? or could be use also for regular testing such as voice?

[djcad]

According to Infovista TEMS Investigation 22.x will not need to temsify a device etc.

ODM testing on commercial devices
From TEMS Investigation 22.0 it will be possible to measure the network performance seen from commercial devices without requiring them first to be modified (with TEMS firmware). This means that throughput testing of high data speeds in 5G NR networks can be achieved with commercial off the shelf devices.

This feature opens the door for customers to perform data service testing with almost every Android device on the market (not limited by supported chipsets an so on) and makes TEMS Investigation a very powerful choice for 5G testing.




is it ony data testing? or could be use also for regular testing such as voice?

Seems to be only data and perhaps regular CS, atleast on the Samsungs.
For Samsung VoLTE usually requires a specific license to decode SIP/RTP.

[djcad]

does anyone have the driver for the on-device Xiaomi mi mix3 5G , or maybe can search for me in the infovista gls portal.
as although i have the license in my tems investigation (M license for the correct chipset SM8150/X50 Qualcomm M) as I have done all the prerequitsites,
enabled ADM and USB tethering ,enabled debugging etc.etc. but it seems the program(tems investigation 21 is looking for an on-device support, a driver i think. when im trying to connect UE-device equipment.

or has anyone come across this before and know what im actually missing

What I understood that you must enable the diagnostic interface , and in most cases this can only be done when the UE is rooted.
We have tested commercial nonTEMS phones and these seems very unstable.

How is you progress?

[essalvador]

I think xiaomi mi mix 3 5G is NSA capable with ENDC feature enabled & beamindex fully decoded: i get this from this site hicelltek.com

42698

[gockel]

Does anyone has a 5G SA capable Test UE?

I have Huawei P40 Pro with SA mode.

I also have H112-372 but it doesn't work. I have the latest version from Huawei but it still doesn't work.

Does anyone knows how to enable 5G SA mode on H112-372?