Why actix does not draw lines to the cells?

[jamesbond]

Guys, plz help:

Why actix does not draw lines to the cells? I load cellref, some times it draws lines but most of the time does not draw lines to the cells. What is the reason, kindly advise ASAP. Thanks in advance

[BlackX]

Maybe some cell data in cellref is different from the log, i've encountered the carrier of old cellref is A but the log is B. Therefore it does't work

check all parameter like cell name, carrier or check the draw line function is enable or not

[jamesbond]

Maybe some cell data in cellref is different from the log, i've encountered the carrier of old cellref is A but the log is B. Therefore it does't work

check all parameter like cell name, carrier or check the draw line function is enable or not

Thanks bro for your reply. Could you tell me if I just give information of following parameters, will actix be able to associate log files with cellref or I need more information to provide there.




Site ID
Lat
Long
NE ID
Azimuth


Band
PCI

[BlackX]

it should be OK foe these information, and the BAND parameter is channel number in log such as 1550

like this

NodeB cell azi EARFCN PCI Carrier
LTE_Cell XXXXXX LSXXXXXX:1 320 9360 301 700
LTE_Cell XXXXXX LSXXXXXX:7 320 1525 301 1800
LTE_Cell XXXXXX LSXXXXXX:13 320 3250 301 2600
LTE_Cell XXXXXX LSXXXXXX:2 60 9360 150 700
LTE_Cell XXXXXX LSXXXXXX:8 60 1525 150 1800
LTE_Cell XXXXXX LSXXXXXX:14 60 3250 150 2600
LTE_Cell XXXXXX LSXXXXXX:3 240 9360 197 700
LTE_Cell XXXXXX LSXXXXXX:9 240 1525 197 1800
LTE_Cell XXXXXX LSXXXXXX:15 240 3250 197 2600

[justdream]

Guys, plz help:

Why actix does not draw lines to the cells? I load cellref, some times it draws lines but most of the time does not draw lines to the cells. What is the reason, kindly advise ASAP. Thanks in advance

1-Could be problem in Cellref like missing sites not in DT Log
2-be sure that line option is enabled
[To add cell lines, right click on the Map and select Map Layers/ Lines then configure it as you would like]