Huawei BSC6000 feature

[RF engineer]

Hi
some small description for Huawei BSC6000 features it may be useful.
No password free for all and the link is:-
http://www.multiupload.com/9N803SJ9HY

BR
RF

[marcobernard90]

Hi guys,

I've installed succefuly LMT 6000 , but infortunately when I use it in Offline to load a BSC 6000 backup, nothing happend.!!! ! If someone have any idea to resolve it please reply.:(

[RF engineer]

Hi guys,

I've installed succefuly LMT 6000 , but infortunately when I use it in Offline to load a BSC 6000 backup, nothing happend.!!! ! If someone have any idea to resolve it please reply.:(
when you open it in offline click and confirmation window comes up then click no window show you from where to load they are three click on second part(GOMU) then ok then you can load your backup file and see.
BR
RF

[marcobernard90]

I did what u said :same result! I load the backup by using the followings steps:
Configuration/back up/back up data . right????

Thanks in advance

[marcobernard90]

Hi all,
If someone have any idea regarding the LMT issue I'm facing, please reply.

thanks in advance

[RF engineer]

I did what u said :same result! I load the backup by using the followings steps:
Configuration/back up/back up data . right????

Thanks in advance
for loading then go to configuration and then click open local data file then browse to the data file you have.
RF

[marcobernard90]

Hi,

still nothing! I need to confirm something: when I installed LMT , only the SN was required. is there any other activation process to do?
all the backup I 'm using are correct I load them normaly with nastar 2.4

Thankx

[RF engineer]

Hi,

still nothing! I need to confirm something: when I installed LMT , only the SN was required. is there any other activation process to do?
all the backup I 'm using are correct I load them normaly with nastar 2.4

Thankx
no just serial number , did you load from (other or most recent one ) when it ask you .

[marcobernard90]

Hi ,
I don't get your question

[RF engineer]

check below

[marcobernard90]

Hi,

Sorry I can't open the file I'm not allowed to do it accoding the usual message!
If possible send it to my email :marcobernard90@yahoo.fr

Thinks in advance for your help.

[RF engineer]

check your mail i sent
BR
RF

[marcobernard90]

Hi
I got it, I did as showed in your snaphot. see attached, how appear my LMT board after loading a backup

[RF engineer]

when you save the back did you do from configuration+backup+backup server data.
RF

[marcobernard90]

I am using a backup I got from freinds already in HW optim position , I don't know how they saved it. but I can say that the back up is correct.
Thanks

[RF engineer]

OK check may be this is the problem

[marcobernard90]

Thanks a lot for your help.I should also try to install the software again

If somone have the software LMT BSC 6000 please share.

Thanks in dvance

[RF engineer]

Thanks a lot for your help.I should also try to install the software again

If somone have the software LMT BSC 6000 please share.

Thanks in dvance
it is possible to send me the back up let me try with mine .
BR
RF