Rf-VU 4.x

[patogh3]

Hi, I need your help, I need the RF-VU 4.x software to do some indoor projects. I have used the 2.1 version, but i need 4 version. Please your help, if you are intereseted, we can change some software, CAIT, QXDM, Actix, Mapinfo, Atoll, Ldat, and some books for 3G.

I hope you can help me.

Thanks.

Pato:o

[eyaOpti_guy]

It will be installed with mentum planet v4.5 search the forum...

[patogh3]

Hi, I have installed Mentum Planet 4.5 in my PC but tha software doesnt have RF-VU installed, only its possible to import projects, but all is analyzed in RF-VU software.

Please, maybe someone has the medicine for RF-VU 5???

Thanks...

[hidalgo]

RF-VU Pro version 4.2



http://hotfile.com/dl/22634055/2af3f9c/RF-Propagation4.2.6NoVM.exe.html (http://hotfile.com/dl/22634055/2af3f9c/RF-Propagation4.2.6NoVM.exe.html)


and propagation module


http://hotfile.com/dl/22634651/6ecbe5f/RF-

vuPRO4.2.6NoVMa.exe.html (http://hotfile.com/dl/22634651/6ecbe5f/RF-vuPRO4.2.6NoVMa.exe.html)

clean install

[gsm_forumer]

re-upload please..

file is missing.. :(

[freakturd06]

Please re-upload.:p

[tuanvios]

Dear Bro

I really need this tool for study, and I also would like to show to my trainees about Inbuilding design.

Can any body help me? :(


thanks

[rejreyes]

Holfile reply: This file is either removed due to copyright claim or is deleted by the uploader. :confused:

[kin12345]

please reupload I been waiting on this long time.

[gsmman2006]

please reupload that

[gsmman2006]

plz reupload that

[kevin_h811]

HI,

PLS RE-UPLOAD ON ANOTHER SITE..THANKS.

REGARDS//

[ganci.gancic]

Upload again pls.

[blackantt]

please reupload! thanks

[ZhY_1971]

please reupload! thanks

[KveldulvCL]

Yep, please re up! :victory:

[agitator]

Why nobody answer? Admins, VIP members, senior members......please reupload files.
Thanks


Yep, please re up! :victory:

[hidalgo]

Hello,

Here is version 4.2 reuploaded ;-)
If anybody has med available for this version, please share it with the rest.

http://www.wupload.com/file/1929931902/RF-vuPRO4.2.0.exe

[hong lim]

I have RFvu 4.0 software (Install+*****), I can share bro I admin allows, thanks!
Pls contact me!

[hong lim]

RFvu 4.0:
Install: http://www.fileserve.com/file/G9aaRfp
Med: http://www.fileserve.com/file/Dk9sxUV

Thanks kamy and ali56s!

[kamy]

RFvu 4.0:
Install: http://www.fileserve.com/file/G9aaRfp
Med: http://www.fileserve.com/file/Dk9sxUV

Thanks kamy and ali56s!

are you sure this med working?

:p

[kin12345]

it is not working for me though.

[ali56s]

i chek with win 7 x86 but not working too
BR

[vivainter]

Doesn't work with XP 32 & 64
Thanks

[agitator]

Anyone have good med that work fine?
Thanks



Doesn't work with XP 32 & 64
Thanks

[hidalgo]

doesn't work! Are you sure this is for version 4? The files in the pack don't even exist on the installation folder. I suspect it might be for some earlier versions of rf-vu... Also, too bad posting something which doesn't work!!!

[kin12345]

it seems this pack is only work for version 2.0

[hong lim]

RFvu 4.0:
Install: http://www.fileserve.com/file/G9aaRfp
Med: http://www.fileserve.com/file/Dk9sxUV

Thanks kamy and ali56s!
Hi all,
Bro can check here: http://www.fileserve.com/file/3gNunSr/RFvu_Install.rar video install, I installed sucessful!

[vivainter]

what is your OS system ? XP ? VISTA, WIN7 ?
Thanks

[Stantheman]

Hong Lim, the install package you provided works not as complete or the same way as your video. I am using Win XP SP3 (it looks like you are using XP). As others said, when we copy over the med those files are not already existing in the install folder .. so you are obviously not using a clean install, maybe you have already installed/uninstalled it, or have used a different version or trial version? Regardless of this, the install seems to work except for the Prediction plugin, see below.

The key generation works fine using the info you provided in your video, I assume we have to use the same name and company details, we can't use someting else? ... please explain ....

When I start RF-vu, it comes up saying that it is "Unable to find a Prediction plugin", so it looks like you haven't provided this or shown the install of this in your video, please explain and provide the Prediction plugin that we should install, or tell us where on the forum it is.

So when the about panel is brought up it shows the RF-Propagation with an X.

Other than that it appears to open OK ... so thanks for you effort on this! Well done.

BR's, Stan.


update - I tried the ver 4.2 RF-Propagation installer but this did not help.

[ali56s]

Hong Lim, the install package you provided works not as complete or the same way as your video. I am using Win XP SP3 (it looks like you are using XP). As others said, when we copy over the med those files are not already existing in the install folder .. so you are obviously not using a clean install, maybe you have already installed/uninstalled it, or have used a different version or trial version? Regardless of this, the install seems to work except for the Prediction plugin, see below.

The key generation works fine using the info you provided in your video, I assume we have to use the same name and company details, we can't use someting else? ... please explain ....

When I start RF-vu, it comes up saying that it is "Unable to find a Prediction plugin", so it looks like you haven't provided this or shown the install of this in your video, please explain and provide the Prediction plugin that we should install, or tell us where on the forum it is.

So when the about panel is brought up it shows the RF-Propagation with an X.

Other than that it appears to open OK ... so thanks for you effort on this! Well done.

BR's, Stan.


update - I tried the ver 4.2 RF-Propagation installer but this did not help.
i confirm my friend Stantheman too
when we copy over the med those files are not already existing in the install folder
BR

[husseinmanaf]

RFvu 4.0:
Install: http://www.fileserve.com/file/G9aaRfp
Med: http://www.fileserve.com/file/Dk9sxUV

Thanks kamy and ali56s!

Hi

can you please upload them in the others servers ( 4shared , mediafire,....,etc) because there is problem in this server

[hidalgo]

Stantheman, Does it mean that the install works fine for you? You are able to run the software with no issue? In my case,I still have issue with it, it installs correctly, the licence is generated correctly however when I run it, it give an error message about the license not being valid!!! Anyway, I will to install on a fresh XP. I am also running XP SP3.

[hong lim]

Hong Lim, the install package you provided works not as complete or the same way as your video. I am using Win XP SP3 (it looks like you are using XP). As others said, when we copy over the med those files are not already existing in the install folder .. so you are obviously not using a clean install, maybe you have already installed/uninstalled it, or have used a different version or trial version? Regardless of this, the install seems to work except for the Prediction plugin, see below.

The key generation works fine using the info you provided in your video, I assume we have to use the same name and company details, we can't use someting else? ... please explain ....

When I start RF-vu, it comes up saying that it is "Unable to find a Prediction plugin", so it looks like you haven't provided this or shown the install of this in your video, please explain and provide the Prediction plugin that we should install, or tell us where on the forum it is.

So when the about panel is brought up it shows the RF-Propagation with an X.

Other than that it appears to open OK ... so thanks for you effort on this! Well done.

BR's, Stan.


update - I tried the ver 4.2 RF-Propagation installer but this did not help.

RF-Propagation: http://www.fileserve.com/file/VujRKsW
@husseinmanaf: U can you leech for fileserve.com
(http://www.finetopix.com/member.php?28897-husseinmanaf)

[kamy]

@Honglim
After screening the video file, i have suspected the pack you provided is the fake one, since we can see "some files" were overwritten ....

[Stantheman]

RF-Propagation: http://www.fileserve.com/file/3gNunSr
@husseinmanaf: U can you leech for fileserve.com
(http://www.finetopix.com/member.php?28897-husseinmanaf)


Hong Lim, this is not the RF-Propagation installer , it is your installation video again ... what is going on? Have you actually done a clean new install (first time) on Windows XP with only the files you have supplied, please explain ...

Thanks, Stan.

[Stantheman]

Stantheman, Does it mean that the install works fine for you? You are able to run the software with no issue? In my case,I still have issue with it, it installs correctly, the licence is generated correctly however when I run it, it give an error message about the license not being valid!!! Anyway, I will to install on a fresh XP. I am also running XP SP3.

Yes, I get the same result, appears to install OK but I get "Unable to find a Prediction plugin"

[kin12345]

RF-Propagation: http://www.fileserve.com/file/3gNunSr
@husseinmanaf: U can you leech for fileserve.com
(http://www.finetopix.com/member.php?28897-husseinmanaf)


which version of xp that you are using bro??

[Stantheman]

Hong Lim, please update on this, explain how you did a clean install on Win XP without having previously installed another or the same version, and get the RF-Propagation feature working. Regards, Stan.

[hidalgo]

From my side I did try again on a fresh XP install and same problem, no way to get the software running. Error message says issue with license when trying to launch the executable.

[Stantheman]

Appears to be working OK for me now, using the Propagation installer Hong Lim has updated here http://www.finetopix.com/showthread.php?5137-Rf-VU-4.x&p=157345&viewfull=1#post157345 , I installed the Propagation model, re-ran the licence application (not sure if I needed to do this but did it anyway), and everything boots up fine now. I can run the propagation analysis using the demo projects.

Thanks for Hong Lim's effort!

[ali56s]

Appears to be working OK for me now, using the Propagation installer Hong Lim has updated here http://www.finetopix.com/showthread.php?5137-Rf-VU-4.x&p=157345&viewfull=1#post157345 , I installed the Propagation model, re-ran the licence application (not sure if I needed to do this but did it anyway), and everything boots up fine now. I can run the propagation analysis using the demo projects.

Thanks for Hong Lim's effort!
hi my friend
plz tell me step by setp
i chek with win 7 x32
not work
BR

[Stantheman]

I am using Win XP, I don't know if it will work for Win 7, maybe you have to install on virtual Win XP on top of Win 7 to get it running, or use a Win XP PC. My installation procedure for Win XP is attached.

[ninoy_122184]

RF-Propagation: http://www.fileserve.com/file/VujRKsW
@husseinmanaf: U can you leech for fileserve.com
(http://www.finetopix.com/member.php?28897-husseinmanaf)
just delete the message

[hong lim]

Hi bro,
I installed WinXP SP3!
Step by step install:
1. Install NET Framework 1.1 and 2.0
2. Install Crystal Reports for .NET Framework 2.0 (x86).
3. Install rf-vu Pro 4.0.msi
4. Install RF-Propagation.msi
5. Copy all file in "Pack folder" to "...\Program Files\iBwave\RF-vu" then run file "RFVU.exe", if display appear: "*****...OK" ==> Successful
Goodluck!

Thanks for all!

[hidalgo]

Hello All,

I just tried it on win XP again and this time it works. The missing part was the Rf-propagation.msi causing the failure. Now it works all fine just like hong lim and stantheman said. Thanks to you guys for the valuable efforts with special mention to hong lim for sharing the soft.

[hidalgo]

At link below, you can download components database for different versions of the software. Good to know that databases are not compatible between them and as such better download the right version.
Version 4 database is available for free at link below.

http://www.ibwavecomponents.com/vex/

[Stantheman]

to import the components, open the data base editor DBEditor.exe , go "file" - "import" , and browse to all the .vex files you downloaded, highlight all the .vex files you want to import, click open, and then you will have to OK each .vex set of components to be imported. Leave out "r&d microwaves - All Components - 20071101.vex" as this appears to be corrupt and stopped the importation of the rest of the files for me.

[freakturd06]

Can I request mirror in 4shared for the installer please?

[ali56s]

Hi bro,
I installed WinXP SP3!
Step by step install:
1. Install NET Framework 1.1 and 2.0
2. Install Crystal Reports for .NET Framework 2.0 (x86).
3. Install rf-vu Pro 4.0.msi
4. Install RF-Propagation.msi
5. Copy all file in "Pack folder" to "...\Program Files\iBwave\RF-vu" then run file "RFVU.exe", if display appear: "*****...OK" ==> Successful
Goodluck!

Thanks for all!
hi my friend
do you have off line setup Crystal Reports for .NET Framework 2.0 (x86)?
plz upload
BR

[freakturd06]

Please check the link attached.


hi my friend
do you have off line setup Crystal Reports for .NET Framework 2.0 (x86)?
plz upload
BR

[ali56s]

Please check the link attached.
i chek it a long time ago
but not working
plz see image
BR

[freakturd06]

Try to install the application. It will automatically download the Crystal Report and install it.

I guess its working.

[hidalgo]

At link below you can download in one package all public available database components for version 4 dated 2008 as available on ibwave website.

File name: Public Database RF-VU version 4.0.7z File size: 3.7 MB (http://www.fileserve.com/file/Rbc8HKh/Public Database RF-VU version 4.0.7z)

[redendo]

@freakturd06

Could you share with us your Rf vu propagation installer for version 4.0 because it doesn't working for me.
I have installed 4.2 version and I guess it's the main cause of this issue

Kind regards

[Stantheman]

Redendo, links for 4.0 installer and med here http://www.finetopix.com/showthread.php?5137-Rf-VU-4.x&p=156457&viewfull=1#post156457 , credit to Hong Lim, password at bottom of post

RF-Propagation installer for ver 4.0 http://www.finetopix.com/showthread.php?5137-Rf-VU-4.x&p=157345&viewfull=1#post157345 , credit again to Hong Lim.

Hong Lim's installation guide video http://www.finetopix.com/showthread.php?5137-Rf-VU-4.x&p=157051&viewfull=1#post157051

How I installed it http://www.finetopix.com/showthread.php?5137-Rf-VU-4.x&p=158486&viewfull=1#post158486

Hong Lim's install guide http://www.finetopix.com/showthread.php?5137-Rf-VU-4.x&p=158540&viewfull=1#post158540

Get the RF compenents here and use the Database Editor to install them http://www.ibwavecomponents.com/vex/ or here http://www.finetopix.com/showthread.php?5137-Rf-VU-4.x&p=158677&viewfull=1#post158677

People have had success installing on Win XP SP3 so far, does not look like it can be installed on Vista or Win 7

Let us know how you get on.

Stan.

[ali56s]

off line setup Crystal Reports for .NET Framework 2.0 (x86) for all friends
now you can install rf-vu without ethernet
:lol

[redendo]

Hello everybody;

Is there any Add on macro available to share for atoll (3.1 preferably) to integrate this magical tool within atoll for inddor design.
Look at the attachment.

Thanks in advance

[redendo]

Any update here about my request dears


Hello everybody;

Is there any Add on macro available to share for atoll (3.1 preferably) to integrate this magical tool within atoll for inddor design.
Look at the attachment.

Thanks in advance

[hidalgo]

Hello,

So that we never loose track of this very useful software, below is the full package of the rf-vu version 4.0, install + med as found on this thread.
Enjoy! and again thanks a million for those who shared this.

File name: RF-vu_4.0_Installation_Package.7z File size: 63.29 MB (http://www.fileserve.com/file/4xSXpy7/RF-vu_4.0_Installation_Package.7z)


http://www.megaupload.com/?d=U6QR3DL0

[ivandgreat]

Does anyone tried it with win 7 64 bits?

[hidalgo]

that version is not for 64bits, it won't work.

[rfoptman]

May somone share it in 4share.com please!

[hidalgo]

Here it is with 4shared.com link. Enjoy! :-)

RF-vu_4.0_Installation_Package.7z (http://www.4shared.com/file/cbYD0TPo/RF-vu_40_Installation_Package.html)

[noircy]

Any update here about my request dears

Hi all
Someone have a answer for relendo request ?

Thanks in advance.

Noircy

[hakimgsm]

Hi friend;
It’s a good doc;
Many thanks.

[hidalgo]

Just tried to install on windows 7 XP mode,but the setup gave an error. It requires a non-virtualized hardware system to install.

[vivainter]

Doesn't work on XP 64 : only XP 32 SP3

[Moutaz Abdelkader]

[QUOTE=Stantheman;158486]I am using Win XP, I don't know if it will work for Win 7, maybe you have to install on virtual Win XP on top of Win 7 to get it running, or use a Win XP PC. My installation procedure for Win XP is attached.

upload it 4shared plz or any ... plzzzzzz

[Moutaz Abdelkader]

My O.S is Win7 and i hava installed XP-32-SP on(VMware) ... but .. an error message appear says " u should have at least one un virtualed o.s"

[luca.b]

Here it is with 4shared.com link. Enjoy! :-)

RF-vu_4.0_Installation_Package.7z (http://www.4shared.com/file/cbYD0TPo/RF-vu_40_Installation_Package.html)

I try to follow the procedure but during rf-vu Pro4.0.msi installation appears "Verify that the file exist and you can access it. comuld.dll doean't exist"

[atit]

plz any solution for Win7, to make this med work?

[97479]

I install and run Rf-Vu from hong lim successfully, but when I creat project, save it, close RV-Vu. Open My project again and it become read only.

[Stantheman]

Yes, this has been noticed by a few of us now, so the fix is not 100%. Can any expert look at this and figure out why?

[97479]

Sample project open with full access, but if save the project, it also become read only.
I think med from hong lim only desable time limits, but license stay trial.

[mizo mizo]

please .. i want to know how to get the database of " WALLS " ... i installed this version from this Forum but it does not contain the database of "WALLS"

[97479]

please .. i want to know how to get the database of " WALLS " ... i installed this version from this Forum but it does not contain the database of "WALLS"

Use DB Editor to creat userdefined walls. Some wall`s data may use from winprop (see attarchment)

[WILLqad]

i am not able to download the patch file can you please upload it here or on 4shared also when i start the istall the RF-vu it's not starting

RFvu 4.0:
Install: http://www.fileserve.com/file/G9aaRfp
Med: http://www.fileserve.com/file/Dk9sxUV

Thanks kamy and ali56s!

[cdikjoe]

Here it is with 4shared.com link. Enjoy! :-)

RF-vu_4.0_Installation_Package.7z (http://www.4shared.com/file/cbYD0TPo/RF-vu_40_Installation_Package.html)

Hi All,

I have installed this version and its work. It successfully to save the project. the problem is when i open the project, actually it can open, but i can't edit that project. Does anyone got the same problem with me? or anyone have a solution to fix that problem?

Thanks!

[Stantheman]

yes, this is a problem with this version and fix, not sure if anyone was able to correct this.

[cdikjoe]

yes, this is a problem with this version and fix, not sure if anyone was able to correct this.
You can fix that problem? Please tell me :)

[donsalvador]

Mr. Hong Lim.

Is possible re-upload the archives?
Best regards.
Saludos



RFvu 4.0:
Install: http://www.fileserve.com/file/G9aaRfp
Med: http://www.fileserve.com/file/Dk9sxUV

Thanks kamy and ali56s!

[saullow]

links off! reup pls

[dangminhthuan]

Pls reupload. Now i need it. Thks!

[ittalksa]

Hong Lim, Hidalgo, and Stantheman, you guys are Super Stars. Thank you for your uploads and comments. I have been looking for this for a while now, and I am so glad that I got to this thread. It doesn't even matter whether it opens my files in RO, as long as I have it for now (I do hope that someone could fix it, though...). Thank you guys. I'm adding reps to ALL of you!! Great work.

Update:- So how long do I wait for the OK Window...? I can't seem to get it going, even when I followed the instructions to the T (Both Stantheman and Hong Lim's). I also have WinXP SP3. What else could it be, short of having to reinstall Windows (which I really don't want to do)?

[ianmauhay]

Does anybody make it work?

[ianmauhay]

can someboby share it again because the link are all dead.
Thank you very much

[jojoruizdaker]

Can anyone share the files again??? The links don't seem to work anymore.
Thank you

[Loverman]

I have vex file for that, this file include component information. I try to attache it....

[Alexgol8]

Please reupload Rf-VU 4.x + Med. Now i need it. Thanks!

[luca.b]

Can someone make a state of the art for this software and its med ?..
thanks a lot

[aosan]

pls can anyone share this again? thanks alot

Hello,

So that we never loose track of this very useful software, below is the full package of the rf-vu version 4.0, install + med as found on this thread.
Enjoy! and again thanks a million for those who shared this.

File name: RF-vu_4.0_Installation_Package.7z File size: 63.29 MB (http://www.fileserve.com/file/4xSXpy7/RF-vu_4.0_Installation_Package.7z)


http://www.megaupload.com/?d=U6QR3DL0

[sandrommm]

Pls Is This med working?? because i installed but no run with :
Licence to: Vu Tien Luc
Organisation/Company: 189JSC

Thanks!

[anjana.sharma]

can u install the ibwave med pls





Pls Is This med working?? because i installed but no run with :
Licence to: Vu Tien Luc
Organisation/Company: 189JSC

Thanks!

[metalnumb]

Could someone please upload the components ".vex" file on any sharing website (eg.mediafire....)
Thanks !

[kasun5810]

Hi Can u upload again
after upload pls send me the mail

Tx
Kasun Marasinghe
kasun.commecheng@gmail.com