View Full Version : Inactivity timer for LTE TDD
rimoucha
2018-12-27, 04:06 PM
Hello Experts,
what's the recommended value for inactivity timer for LTE TDD (fixed CPEs scanario)
thanks,
auto_art
2018-12-28, 12:27 AM
we kept it default, we tried increasing it too. but did not make much difference in service connectivity but RRc license requirement increased. I would not recommend it.
subway
2018-12-29, 01:34 AM
On Huawei we use 20 seconds for a TDD WTTx-like scenario. Lowering it too much will result in increased (and unnecessary) signalling load. I would recommend something between 20 and 30 seconds for WTTx 10-20 seconds for normal MBB usecase. You can also investigate by analyzing your current pattern to see if the setting is not too low/high for your current usecase.
dennielone
2019-12-05, 02:15 AM
Agree with subway, 20s is good and 10s is good for mobile(celluar).
Qui najua
2019-12-06, 06:14 PM
Hi rimoucha,
The comment of the subway is valid, but only after making an evaluation of its standard, then you can decide if you will use a value or not.
Best regards.
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.