View Full Version : Ultrafast CS Call Setup
mounir34
2018-12-14, 06:58 AM
This feature changes serial processing of the called party to parallel processing, thereby reducing the access delay of the calling party.It provides the following functions:
Func1:Parallel processing of the Iu interface and Uu interface paging procedures
Func2:Parallel processing of the Iu interface setup and Uu interface security mode procedures
Func3:Parallel processing of the ringing and RAB setup procedures
41749
below the result
41750
add reputation plz
oussama85
2018-12-18, 10:44 PM
Dear Mounir
please can you share switchs and parameters for activation
Thanks
RF engineer
2018-12-19, 02:56 PM
This feature changes serial processing of the called party to parallel processing, thereby reducing the access delay of the calling party.It provides the following functions:
Func1:Parallel processing of the Iu interface and Uu interface paging procedures
Func2:Parallel processing of the Iu interface setup and Uu interface security mode procedures
Func3:Parallel processing of the ringing and RAB setup procedures
41749
below the result
41750
add reputation plz
But there is one function will be lost by activate this feature which is trace on U2000 .
BR
mounir34
2018-12-22, 01:53 AM
salam oussam
is very good feature i tested and its working well,no negative impact and the call delay decreased by almost 300ms
below the script for activation,thanks
SET UULTRAFASTCSACCESS:ALERTINGPARALLELSWITCH=ON,LOWSRBALERTINGSWITCH=ON,SECMODPARALLELSWITCH=ON;
SET UULTRAFASTCSACCESS:PAGINGPARALLELTMR=5,LOCRNCUSRINFOAGINGTMR=80,NRNCUSRINFOAGINGTMR=12,ALERTINGPARALLELRSCPTHD=-115,ALERTINGPARALLELECNOTHD=-24;
Dear Mounir
please can you share switchs and parameters for activation
Thanks
mounir34
2018-12-22, 01:56 AM
no,the both, feature and trace are working well,is a good feature
But there is one function will be lost by activate this feature which is trace on U2000 .
BR
Dear mounir34,
How does this feature affect KPI? Especially Call Setup Success Rate ?
Thank you.
mounir34
2019-01-01, 12:52 AM
dear
no negative impact after activate the feature,thanks
Dear mounir34,
How does this feature affect KPI? Especially Call Setup Success Rate ?
Thank you.
techfolkcmr
2019-01-01, 03:52 PM
salam oussam
is very good feature i tested and its working well,no negative impact and the call delay decreased by almost 300ms
below the script for activation,thanks
SET UULTRAFASTCSACCESS:ALERTINGPARALLELSWITCH=ON,LOWSRBALERTINGSWITCH=ON,SECMODPARALLELSWITCH=ON;
SET UULTRAFASTCSACCESS:PAGINGPARALLELTMR=5,LOCRNCUSRINFOAGINGTMR=80,NRNCUSRINFOAGINGTMR=12,ALERTINGPARALLELRSCPTHD=-115,ALERTINGPARALLELECNOTHD=-24;
In which RAN version this feature is available. I searched in R15 i couldnt find it.
mounir34
2019-01-01, 08:10 PM
In RAN17, thanks
In which RAN version this feature is available. I searched in R15 i couldnt find it.
plannerguy
2019-01-03, 08:11 PM
Hi
may now which vendor.
Rgds
Plannerguy
mounir34
2019-01-04, 09:12 PM
Huawei Vendor,thanks
Hi
may now which vendor.
Rgds
Plannerguy
Huawei Vendor,thanks
Is some similar feature for 4G as well?
mounir34
2019-01-15, 06:52 AM
For LTE you can activate Flash CSFB Feature,thanks
Is some similar feature for 4G as well?
For LTE you can activate Flash CSFB Feature,thanks
And for Volte? To obtain average 1.1s call setup time instead of average 2.8s? Is there any feature for that?
justdream
2019-02-10, 08:33 AM
This feature changes serial processing of the called party to parallel processing, thereby reducing the access delay of the calling party.It provides the following functions:
Func1:Parallel processing of the Iu interface and Uu interface paging procedures
Func2:Parallel processing of the Iu interface setup and Uu interface security mode procedures
Func3:Parallel processing of the ringing and RAB setup procedures
below the result
add reputation plz
Friend, kindly did you notice any paging problem after feature activation?
zeezzoo
2019-02-14, 12:23 AM
Any similar features for VoTLE?
mounir34
2019-02-15, 07:34 AM
Friend, kindly did you notice any paging problem after feature activation?
No no problem, the paging is Ok
justdream
2019-02-15, 11:42 AM
No no problem, the paging is Ok
Please do you remember your RAN Release & SPC when you implemented this feature
mounir34
2019-02-16, 10:39 PM
Please do you remember your RAN Release & SPC when you implemented this feature
dear
RAN19.1,thanks
coach
2019-02-24, 06:29 AM
Hi, great results
Question: do you have TFO/TrFO enabled in your network?
Thanks
mounir34
2019-02-24, 07:00 AM
yes is activated,thanks
Hi, great results
Question: do you have TFO/TrFO enabled in your network?
Thanks
justdream
2019-04-17, 05:04 AM
This feature changes serial processing of the called party to parallel processing, thereby reducing the access delay of the calling party.It provides the following functions:
Func1:Parallel processing of the Iu interface and Uu interface paging procedures
Func2:Parallel processing of the Iu interface setup and Uu interface security mode procedures
Func3:Parallel processing of the ringing and RAB setup procedures
41749
below the result
41750
add reputation plz
Friend, have you observed any improvement at the Terminating side as well or only originating side !
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.