View Full Version : How to improve uplink throughput in LTE in e******* system
abhijeetzte
2018-01-17, 07:25 PM
Dears,
I am facing uplink throughput issue, how to improve LTE uplink throughput in e******* system.
AmenayZef
2018-01-25, 11:51 PM
You need to, first, check your radio conditions before going to parameter details.
abhijeetzte
2018-01-27, 03:20 AM
My Radio conidtion is good, Download speed is more than 20 mbps over all network.But upload speed is less than 1 mbps.
AmenayZef
2018-01-29, 01:02 AM
You need to:
1/ Identify cells with low UL throughput
2/Check if there is UL interference in the surroundings of the affected areas (Run report for UL RSSI)
3/Check BLER values.
4/Check counters concerning demand.
[*=left]Maximum number of RRC connections supported per cell (parameter or feature)
[*=left]Maximum number of RRC connections active per cell
[*=left]Average number of RRC connections active per cell
[*=left]Maximum number of users per TTI supported per cell (parameter or feature)
[*=left]Maximum number of users scheduled per TTI in the cell(s) of interest
[*=left]Average number users scheduled per TTI in the cell(s) of interest
5/Check scheduler type your supplier supports.
6/Check power headroom of the UEs (If low, It is possible you have a UL interference or Incorrect power control parameters or any other reason).
7/Check VSWR or backhaul capacity.
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.