PDA

View Full Version : MTM 700 HAm-Radio



Peter1221
2017-11-11, 10:02 PM
Hello, i have two MTM700. One with an HAM-Radio Codeplug and one with no HAM-Radio.
I would like to make the second MTM 700 also an amateur radio device.
I have the CPS LAB. Only the problem is that I can not write the code plug on the other one. That's why I ask if you have the firmware R08.0000.5544 CP 46.25. Or could offer another possibility.
Many Thanks

580-Gabor
2017-11-12, 08:46 PM
Just found this:
R080005544.z19
Download here:
https://mega.nz/#!8I9AnLxb!XDWqZtsCp4MiCkqTiCOE0Fx3Vbe6PG1_InMyAYDE4SA
Only 1,6Mb.
I hope it helps, but i think it is for the MTM-800.

Gábor from Hungary

-bup-
2017-11-13, 05:20 AM
Hi Peter,


You should post your CP, a member may be able to help.....

Peter1221
2017-11-21, 03:23 PM
Thank your for your Help. Here is the Codeplug from the normal MTM700.
Thanks :)

Peter1221
2017-11-21, 03:27 PM
I had test it but it dont work :/ Is this an Application Firmware? Because I can flash it only as an Apllication Image :confused:

-bup-
2017-11-21, 04:23 PM
Hi,

Application image = radio firmware

Check this url : https://www.sendspace.com/file/zsbr8e

Peter1221
2017-11-21, 11:06 PM
Hi,
Could you give as an dbf file ? because i cant open it.
I Use this 7A.398.01-lab CPS.
Thanks

-bup-
2017-11-24, 03:13 PM
Hi,

Yes, sorry my mistake ! here is .dbf file : https://www.sendspace.com/file/1rrxgf

Peter1221
2017-11-25, 07:20 PM
Hi,
no problem. It works now :)) but i have now an Funny Problem. You can Transmitt on any DMO Freqeuncy without problems(for example 430.100). But if the MTM700 recevie something, it make an reboot. Do you know what kind of problem could it be ?
Thank You

RA1AIE
2017-11-29, 08:23 AM
Which firmware version do you have in your MTM700? The R08 versions are for the MTM800 only. MTM700 is R02.xxx.xxx.

-bup-
2017-11-29, 08:39 AM
Yes, that's right, there is confusion because another user kindly uploaded wrong firmware (MTM800) but it was off-topic.

Peter1221
2017-12-04, 07:15 AM
Yes, that's right, there is confusion because another user kindly uploaded wrong firmware (MTM800) but it was off-topic.

I found the Problem, i had set something wrong in the CPS.
Thanks

gonzalo1966
2018-08-01, 04:15 PM
hola compañero.
necesitaria el archivo r080005544.z19, ya que no esta ya disponible y te agradeceria volverlo a tener.
gracias

RA1AIE
2018-08-02, 08:07 AM
Ну, раз тут по-испански заговорили, давайте я по-русски буду :)

gonzalo1966
2018-08-02, 03:09 PM
:rolleyes:sorry,
Spaniards are also people, jjj

AnRegs
2018-08-02, 09:25 PM
大家好 你好嗎? 天氣怎麼樣?

Why not?

zeuscane
2018-08-02, 09:29 PM
Please use English

zeuscane