carver
2017-08-31, 03:58 AM
I encountered a strange problem, with my old NEC ipasso.
I can't add port bandwidth graphs to my Nagios monitoring.
I want to monitor the ports GE1 ... GE4, and SFP1/2,
But I can't find the required OID for the ports.
by SNMP, I find only the ports eth0.xx, bridgeXX and bcmXX
Below is my SNMP list of ports. no GE/SFP port.
Can anyone know if there is an opportunity to get values on the ports,
or is it just such an architecture ?
Thanks.
IF-MIB::ifName.1 = STRING: lo
IF-MIB::ifName.2 = STRING: eth0.1
IF-MIB::ifName.3 = STRING: inband
IF-MIB::ifName.11 = STRING: bridge1
IF-MIB::ifName.12 = STRING: bridge2
IF-MIB::ifName.13 = STRING: bridge3
IF-MIB::ifName.14 = STRING: bridge4
IF-MIB::ifName.15 = STRING: bridge5
IF-MIB::ifName.16 = STRING: bridge6
IF-MIB::ifName.17 = STRING: bridge7
IF-MIB::ifName.18 = STRING: bridge8
IF-MIB::ifName.19 = STRING: bridge9
IF-MIB::ifName.20 = STRING: bridge10
IF-MIB::ifName.21 = STRING: bridge11
IF-MIB::ifName.22 = STRING: bridge12
IF-MIB::ifName.23 = STRING: bridge13
IF-MIB::ifName.24 = STRING: bridge14
IF-MIB::ifName.25 = STRING: bridge15
IF-MIB::ifName.26 = STRING: bridge16
IF-MIB::ifName.27 = STRING: bridge17
IF-MIB::ifName.28 = STRING: bridge18
IF-MIB::ifName.29 = STRING: bridge19
IF-MIB::ifName.30 = STRING: bridge20
IF-MIB::ifName.31 = STRING: eth0.3
IF-MIB::ifName.32 = STRING: eth0.2
IF-MIB::ifName.41 = STRING: bcm2-1
IF-MIB::ifName.42 = STRING: bcm3-1
IF-MIB::ifName.8454144 = STRING: lldp1-1
IF-MIB::ifName.8519680 = STRING: lldp1-2
IF-MIB::ifName.8585216 = STRING: lldp1-3
IF-MIB::ifName.8650752 = STRING: lldp1-4
IF-MIB::ifName.8716288 = STRING: lldp1-5
IF-MIB::ifName.8781824 = STRING: lldp1-6
IF-MIB::ifName.16842752 = STRING: lldp2-1
IF-MIB::ifName.25231360 = STRING: lldp3-1
I can't add port bandwidth graphs to my Nagios monitoring.
I want to monitor the ports GE1 ... GE4, and SFP1/2,
But I can't find the required OID for the ports.
by SNMP, I find only the ports eth0.xx, bridgeXX and bcmXX
Below is my SNMP list of ports. no GE/SFP port.
Can anyone know if there is an opportunity to get values on the ports,
or is it just such an architecture ?
Thanks.
IF-MIB::ifName.1 = STRING: lo
IF-MIB::ifName.2 = STRING: eth0.1
IF-MIB::ifName.3 = STRING: inband
IF-MIB::ifName.11 = STRING: bridge1
IF-MIB::ifName.12 = STRING: bridge2
IF-MIB::ifName.13 = STRING: bridge3
IF-MIB::ifName.14 = STRING: bridge4
IF-MIB::ifName.15 = STRING: bridge5
IF-MIB::ifName.16 = STRING: bridge6
IF-MIB::ifName.17 = STRING: bridge7
IF-MIB::ifName.18 = STRING: bridge8
IF-MIB::ifName.19 = STRING: bridge9
IF-MIB::ifName.20 = STRING: bridge10
IF-MIB::ifName.21 = STRING: bridge11
IF-MIB::ifName.22 = STRING: bridge12
IF-MIB::ifName.23 = STRING: bridge13
IF-MIB::ifName.24 = STRING: bridge14
IF-MIB::ifName.25 = STRING: bridge15
IF-MIB::ifName.26 = STRING: bridge16
IF-MIB::ifName.27 = STRING: bridge17
IF-MIB::ifName.28 = STRING: bridge18
IF-MIB::ifName.29 = STRING: bridge19
IF-MIB::ifName.30 = STRING: bridge20
IF-MIB::ifName.31 = STRING: eth0.3
IF-MIB::ifName.32 = STRING: eth0.2
IF-MIB::ifName.41 = STRING: bcm2-1
IF-MIB::ifName.42 = STRING: bcm3-1
IF-MIB::ifName.8454144 = STRING: lldp1-1
IF-MIB::ifName.8519680 = STRING: lldp1-2
IF-MIB::ifName.8585216 = STRING: lldp1-3
IF-MIB::ifName.8650752 = STRING: lldp1-4
IF-MIB::ifName.8716288 = STRING: lldp1-5
IF-MIB::ifName.8781824 = STRING: lldp1-6
IF-MIB::ifName.16842752 = STRING: lldp2-1
IF-MIB::ifName.25231360 = STRING: lldp3-1