View Full Version : Question Carrier Aggregation Support in Actix
gabrielmp
2017-07-11, 09:46 PM
Hi guys.
My client will start deploying CA in their network. I'd like to know if someone can help me with the logs. I mean, how are the logs going to appear when the device is picking up more than one frequency at a time ?
Also, is there something that points to how many carriers it is picking ? Is it possible to show if it is picking 2, 3 or 4 carriers ?
Thanks !
BlackX
2017-07-11, 10:45 PM
if you using NEMO for DT test (at least 3CC in network, if 4CC using nemo 7.9 or 8.0 ) , you must use actix newer than 2016/01 version
And check can you see the parameter "LTE_UE_Carrier_Num_DL" ? My customer use this to identify how many carrier download now
If you can't see this parameter, upgrade your lic to LTE-Adv .
sak2e
2017-07-12, 11:24 AM
all item related with CA is under LTE-Advanced directory, for example DL CA is located under Downlink Measurement -> LTE- Advanced.
gabrielmp
2017-07-12, 09:26 PM
Thanks, guys.
Actually the only CA parameter I found was the "LTE_UE_Carrier_Num_DL". Is there something else in Actix which can assist CA analysis ?
BlackX
2017-07-12, 10:21 PM
like yoyokdp (http://www.finetopix.com/member.php/60053-yoyokdp) said , All CA related parameter is under
Downlink Measurement > LTE-Advanced
or
Serving Cell parameter > LTE-advanced
you can check parameter by carrier such as RSRP、SINR、RB、bandwidth .....
gabrielmp
2017-07-12, 11:02 PM
like yoyokdp (http://www.finetopix.com/member.php/60053-yoyokdp) said , All CA related parameter is under
Downlink Measurement > LTE-Advanced
or
Serving Cell parameter > LTE-advanced
you can check parameter by carrier such as RSRP、SINR、RB、bandwidth .....
In my Actix it is only appearing the Carrier Num under Serving Cell Parameter. No LTE-Advanced found under Downlink Measurement.
Anyway, thanks for the reply.
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.