Tunning of C-DRX Parameters in Huawei eRAN 8

[mashi123]

Hi Guys
can you give your opinion regarding the below tuning of C-DRX

On-Duration Timer NOW:PSF2 Suggestion:PSF10
DRX Inactivity Timer NOW:PSF80 Suggestion:PSF200
Long DRX Cycle NOW:SF40 Suggestion:PSF320
Short DRX Cycle Timer NOW:1 Suggestion:2

all remaining parameters are defaulted

[Boraa]

could you share the kpi

[mashi123]

guys please your support , did u tune these parameters before and what was the result , the reason of tuning is issue of high battery consumption , we bench-marked two operators , it seems that ours is consuming much higher than the other operator , rf conditions are good , resources allocated in both cases are not much different. in idle mode both mobiles are consuming relatively similar Current (something around 7 mA) so we assumed that the issue is with the radio power consumption

[mashi123]

could you share the kpi

dear
the new settings still not implemented ,as im not sure what are the good values , i will share after implementation

[justdream]

dear
the new settings still not implemented ,as im not sure what are the good values , i will share after implementation
Good luck friend,
kindly update us with the result please