How to Modify Electrical Tilt in Atoll 3.3.2

[kid1519]

Hello my friends,
I use Atoll 3.3.2 and i can not Modify Electrical Tilt.
I read and do step by step like this thread:
http://www.finetopix.com/showthread.php/28664-How-to-Modify-Electrical-Tilt-in-Atoll-3-1
But i am not successful
Please help me.
Thanks

[manu4ever]

There are two ways to modify your electrical tilt:
1. paste [Antenna] REDTDisplay = 1 in Atoll.ini as from the thread you mentioned above.
2. Modify from the antenna pattern file

[kid1519]

I tried 1 but not successful.
Can you show me more step 2???

There are two ways to modify your electrical tilt:
1. paste [Antenna] REDTDisplay = 1 in Atoll.ini as from the thread you mentioned above.
2. Modify from the antenna pattern file

[slava121]

Good day! To change the electrical angle of the antenna selected sector, You need to create a folder of the Physical Antenna and make it a Patern for a specific antenna. After that, when the selected folder Physical Antenna - values of the electrical angle will be active.

[manu4ever]

I tried 1 but not successful.
Can you show me more step 2???
Dear kid1519
1. Let's try again. Copy the attatched file and paste in C:\Program Files\Forsk\Atoll and restart Atoll.
2. For example: you can create the e-tilt=1 pattern from e-tilt=0 pattern by shifting the value in vertical pattern

40325
It's not exact 100% but you can use it in case you don't have the e-tilt=1 pattern from the manufacturer.

[kid1519]

Thank you one more time my friend
I will try.


Dear kid1519
1. Let's try again. Copy the attatched file and paste in C:\Program Files\Forsk\Atoll and restart Atoll.
2. For example: you can create the e-tilt=1 pattern from e-tilt=0 pattern by shifting the value in vertical pattern

40325
It's not exact 100% but you can use it in case you don't have the e-tilt=1 pattern from the manufacturer.