PDA

View Full Version : Swap RAN Huawei by E*******



ahrouch
2017-01-23, 06:43 AM
Dears,

the campany where i work want to swap Huawei RAN network by e*******, so if someone had already experience in this kind of project to share it and how it works, process, documents, issues...

BR

Samir

RF engineer
2017-01-23, 01:38 PM
Dears,

the campany where i work want to swap Huawei RAN network by e*******, so if someone had already experience in this kind of project to share it and how it works, process, documents, issues...

BR

Samir

Hi Dear

Just i can say it is wrong strategical step, had the same swap in part of network before and now big bosses in company admitted was wrong move .

Good luck

BR

ahrouch
2017-01-24, 12:14 AM
Thank you for your response.

in our case also, just one part of the network who will be swaper.

Can you please provide some procedure of how to perform the Swap if you have it :)

BR

RF engineer
2017-01-24, 02:10 PM
Thank you for your response.

in our case also, just one part of the network who will be swaper.

Can you please provide some procedure of how to perform the Swap if you have it :)

BR

Dear

For swap process should have

1- A project manager from your company to handle such project
2- Agree on KPIs and mapped with currect formula so that when you compare the performance
3- Radio parameter mapping
4- Need to have drive test report for each site after swap to show the performance is very good
5- Need to have cluster drive test to have overview before and after the swap for any change.
6- You need radio team to follow on this process in order fastly and smoothly project running
7- End you need to make acceptance for swap
8- Either you need managed service for optimization for specific period or not depend on you .

BR