Original Need Monte-Carlo Simulation Doc in Atoll [Archive]

View Full Version : Original Need Monte-Carlo Simulation Doc in Atoll

DANORM

2017-01-09, 10:56 PM

Hi all

I am searching the new detailed Monte-Carlo Simulation document for Atoll (better for 3.3.1 and 3.3.2 versions).

Thanks in advance ^_^

rejreyes

2017-01-12, 04:59 PM

Here you go. No needed password. A simple thank for this post will do.

DANORM

2017-01-12, 05:23 PM

Thanks. Do you have same version doc for Traffic Maps?

Here you go. No needed password. A simple thank for this post will do.

Roman99

2017-01-12, 05:34 PM

Thanks. Do you have same version doc for Traffic Maps?

This is for Atoll 3.2.1:
http://docslide.us/documents/traffic-maps-management.html

DANORM

2017-01-12, 05:45 PM

That old version i have. Thanks anyway ^_^

This is for Atoll 3.2.1:
http://docslide.us/documents/traffic-maps-management.html

krobelux

2017-02-04, 01:22 AM

someone here have try montecarlo simulation with 3.3.2.10366?
i try, but at statistic did not show any value like below
40151
40152
is there any suggestion?
thanks in advance

DANORM

2017-02-04, 05:48 PM

I've tried and its working. Check traffic maps and zones where you are making simulation. Check the demanded services and all parameters in Network settings

krobelux

2017-02-04, 07:20 PM

I've tried and its working. Check traffic maps and zones where you are making simulation. Check the demanded services and all parameters in Network settings
thanks bro...now its normal again...
:D:D

krobelux

2017-02-04, 10:05 PM

Need Help
How to set cell parameter for layering priority for montecarlo simulation
i hace 2 layer, FDD Band 7 [2600] CHBW 20MHz and another is FDD Band 3 [1800] with 15 MHz ChBW, when simulation finish, user connected to L1800 is 3 times from user connected at L2600, i try to change Min RSRP, but still same.
BTW PMax setting is 30Watt for every 10 MHz ChBW.
maybe someone can suggest me how to setting up cell para at atoll to make layering priority

DANORM

2017-02-04, 10:27 PM

Which one is SCell and PCell? I guess if L18 is PCell users with low throughput demand should be connected more than CA users, also check the weights for user distributions in traffic map configurations.

Need Help
How to set cell parameter for layering priority for montecarlo simulation
i hace 2 layer, FDD Band 7 [2600] CHBW 20MHz and another is FDD Band 3 [1800] with 15 MHz ChBW, when simulation finish, user connected to L1800 is 3 times from user connected at L2600, i try to change Min RSRP, but still same.
BTW PMax setting is 30Watt for every 10 MHz ChBW.
maybe someone can suggest me how to setting up cell para at atoll to make layering priority