PDA

View Full Version : Download xcal-m setup (v3.3.6.121) and xcap-m-5.12.1.0 installers only



Jose1975
2016-12-13, 05:46 AM
Hi guys this time I would like to share with you xcal-m (v3.3.6.121) and xcap-m-5.12.1.0 installers only in this file you will also find additional patches to install after the installation of each set up , I must say that I am only sharing the set up files I do not have the med or any licgen, perhaps someone in the forum can help to create an emulator for these two softwares. in my particular case I Need and emulator for xcal-m setup (v3.3.6.121) and xcap-m-5.12.1.0 that has LTE SEQUANS CHIPSET integrated.

here is the link to download:

https://mega.nz/#!uApRQKbY!acSbTrlos7iI_EbA8oNTEYgZZsa7T3OMc3UWjY24PfU

password to unrar files: www.finetopix.com

I hope some expert in this matter can give us a hand with med for these softwares I will really appreciate if someone can help me.

BR...

The download link has been updated enjoy...

mashi123
2017-04-08, 05:53 PM
thx for share
does these tool deserve the effort , can u give an idea about their benefits

Jose1975
2017-04-19, 07:43 AM
yes, It is a very good drive testing and post processing tool but as you can see the only thing that I do not have is the med...

engine-driver
2017-08-30, 06:00 PM
License (XCAL-M, XCAP-M) and emulator (x86, x64) attached below.

After installing them
Photo_1 (https://s5.postimg.cc/54265kptj/Photo_1.png)
the XCAL-M 3.3.6.131 starts smoothly
Photo_2 (https://s5.postimg.cc/79wh02t9z/Photo_2.png)


in my particular case I Need and emulator for xcal-m setup (v3.3.6.121) and xcap-m-5.12.1.0 that has LTE SEQUANS CHIPSET integrated.
You can try to install your expired license for LTE Sequans chipset with the emulator found by me. This emulator works with the expired license found by me
Photo_3 (https://s5.postimg.cc/a59k6xx9z/Photo_3.png)
Therefore, there is a chance that it will work with your expired license.

Example:
The Netgear AC810S (locked to the configuration CA_3_20 using QXDM NV Browser - info (http://4pda.ru/forum/index.php?s=&showtopic=681917&view=findpost&p=47969958)) connected to the XCAL-M 3.3.6.131
40823
40824
40825
40826

Requests to forum members:
1. From the helpdesk
http://help.usa.accuver.com/helpdesk/
it follows that there are available newer XCAL-M 3.4.0.x versions from 2017. If someone has a XCAL-M 3.4.0.x, please share it on the forum.
2. The license found by me supports LTE Qualcomm chipset with 2CA
Photo_8 (https://s5.postimg.cc/iq2vy47g7/Photo_8.png)
If someone has a license which supports LTE Qualcomm chipset with 3CA, please share it on the forum.
3. The license found by me does not support LTE Samsung chipset (Exynos) and LTE HiSilicon chipset (Balong). If someone has a license which supports LTE Samsung chipset (Exynos) or LTE HiSilicon chipset (Balong), please share it on the forum.
4. Consider adding a reputation for me. The working XCAL-M 3.3.6.131 from 2016 (and probably also the XCAP-M 5.13.51.0 - I have not installed and tested it) shared by Jose1975 definitely deserves for that.

Thanks :)

Download (http://www.finetopix.com/showthread.php/47437-xcal-m-setup-%28v3-3-6-121%29-and-xcap-m-5-12-1-0-installers-only?p=272878&viewfull=1#post272878)

hiran
2017-08-31, 10:39 AM
License (XCAL-M, XCAP-M) and emulator (x86, x64) attached below.

(and probably also the XCAP-M 5.13.51.0 - I have not installed and tested it)

Thanks :)

not work for XCAP-M 5.13.51.0:(

Jesterbean
2017-09-01, 01:50 AM
Hi engine-driver (http://www.finetopix.com/member.php/134577-engine-driver) & All

After careful application of installation steps 'xcal-m setup (v3.3.6.121) and xcap-m-5.12.1.0' explained in packages provided by Forum. I'm unable to successfully activate either
XCAL-M or XCAP-M using the license keys provided on my Windows 7 Ultimate - 64bit PC. As seen below, complete with Sentinel v768 already installed.

PS - also observed "Device Driver Notifications - Not Appearing as normal'

40828

Could someone please help me with this application & license

REGDS Jesterbean

tester
2017-09-01, 05:20 AM
@hiran
please upload XCAP-M 5.13.51.0

engine-driver
2017-09-01, 03:14 PM
PS - also observed "Device Driver Notifications - Not Appearing as normal'

40828
Jesterbean, thanks for information. I will check the problem tomorrow.

----------------------------------------------------------------------------------------

From the screenshoot it looks that the problem is DSEO. There is a mistake in an original guide, which I didn’t notice earlier. You should type
C:\Windows\System32\drivers\multikey.sys
under ‘‘Sign a System File’’.

To load Test Mode on Windows 7 x64, I personally use the _prereqSet64v3.cmd script known on the forum (attached below). This is much easier method for me
https://www.raymond.cc/blog/loading-unsigned-drivers-in-windows-7-and-vista-64-bit-x64/

Summarizing, the most important step is to run Install.cmd as Administrator. This will install Virtual USB MultiKey, SafeNet USB SuperPro/UltraPro
Virtual USB MultiKey (https://s5.postimg.cc/xz4rbm9iv/Virtual_USB_Multi_Key.png)
SafeNet USB SuperPro/UltraPro (https://s5.postimg.cc/iexdl2zef/Safe_Net_USB_Super_Pro_Ultra_Pro.png)
and add the registry file 00008ED7.reg to the Windows registry
MultiKey Dumps 00008ED7 (https://s5.postimg.cc/49w5x0fqv/Multi_Key_Dumps_00008_ED7.png)

Check these 3 items now and after Windows restart. Having Java installed you can also check the address
http://localhost:6002 (https://s5.postimg.cc/54265kptj/Photo_1.png)

Now, the program should work.

hiran
2017-09-01, 10:51 PM
@hiran
please upload XCAP-M 5.13.51.0

here is the link to download:




https://mega.nz/#!idgUkJAC!4cCCmozNHL242brIyc031G-fcQfpflZli-BvEmKOnlk

password to unrar files: finetopix

radio_network
2017-09-02, 12:03 AM
how to connect qualcom based datacards/phones
dm port/at port/modem port
could not suceedm
Any help pl

Jose1975
2017-09-02, 01:16 AM
Jesterbean, thanks for information. I will check the problem tomorrow.

----------------------------------------------------------------------------------------

From the screenshoot it looks that the problem is DSEO. There is a mistake in an original guide, which I didn’t notice earlier. You should type
C:\Windows\System32\drivers\multikey.sys
under ‘‘Sign a System File’’.

To load Test Mode on Windows 7 x64, I personally use the _prereqSet64v3.cmd script known on the forum (attached below). This is much easier method for me
https://www.raymond.cc/blog/loading-unsigned-drivers-in-windows-7-and-vista-64-bit-x64/

Summarizing, the most important step is to run Install.cmd as Administrator. This will install Virtual USB MultiKey, SafeNet USB SuperPro/UltraPro
https://s5.postimg.org/xz4rbm9iv/Virtual_USB_Multi_Key.png
https://s5.postimg.org/iexdl2zef/Safe_Net_USB_Super_Pro_Ultra_Pro.png
and add the registry file 00008ED7.reg to the Windows registry
https://s5.postimg.org/49w5x0fqv/Multi_Key_Dumps_00008_ED7.png

Check these 3 items now and after Windows restart. Having Java installed you can also check the address
http://localhost:6002 (https://s5.postimg.org/54265kptj/Photo_1.png)

Now, the program should work. I am having the same issue.

engine-driver
2017-09-07, 04:34 PM
how to connect qualcom based datacards/phones
Quick Guide of XCAL-M from 2016.

Jesterbean
2017-09-07, 07:12 PM
Hi engine-driver (http://www.finetopix.com/member.php/134577-engine-driver) & All

Any progress on fixing known issue as mentioned in below comments.

After careful application of installation steps 'xcal-m setup (v3.3.6.121) and xcap-m-5.12.1.0' explained in packages provided by Forum. I'm unable to successfully activate either
XCAL-M or XCAP-M using the license keys provided on my Windows 7 Ultimate - 64bit PC. As seen below, complete with Sentinel v768 already installed.

PS - also observed "Device Driver Notifications - Not Appearing as normal'

http://www.finetopix.com/attachment.php?attachmentid=40828&d=1504198120

Could someone please help me with this application & license

REGDS Jesterbean

shak33
2018-05-08, 11:45 AM
Hi guys this time I would like to share with you xcal-m (v3.3.6.121) and xcap-m-5.12.1.0 installers only in this file you will also find additional patches to install after the installation of each set up , I must say that I am only sharing the set up files I do not have the med or any licgen, perhaps someone in the forum can help to create an emulator for these two softwares. in my particular case I Need and emulator for xcal-m setup (v3.3.6.121) and xcap-m-5.12.1.0 that has LTE SEQUANS CHIPSET integrated.

here is the link to download:

https://mega.nz/#!idgUkJAC!4cCCmozNHL242brIyc031G-fcQfpflZli-BvEmKOnlk

password to unrar files: finetopix

I hope some expert in this matter can give us a hand with med for these softwares I will really appreciate if someone can help me.

BR...

please reupload... link down... thanks

engine-driver
2018-05-09, 08:09 PM
XCAL-M & XCAP-M link updated.

Download (http://www.finetopix.com/showthread.php/47437-xcal-m-setup-%28v3-3-6-121%29-and-xcap-m-5-12-1-0-installers-only?p=272878&viewfull=1#post272878)

kivilig
2018-09-29, 01:58 AM
Hi engine-driver (http://www.finetopix.com/member.php/134577-engine-driver)

the links to the software does not work, if you could share them with me that would be great,

thanks,

ve.buggiani
2018-10-20, 07:39 AM
Hi engine-driver (http://www.finetopix.com/member.php/134577-engine-driver)

the links to the software does not work, if you could share them with me that would be great,

thanks,

i hope someone share new links...

henry3499
2018-10-28, 05:19 AM
Please do I need license or med after installing patch files

henry3499
2018-11-03, 12:54 PM
Please someone should kindly reupload the files in another server. The file in 4share.com keep disconnecting after downloading 1Gb.
The link also in pan.baidu.com is not working

engine-driver
2018-11-03, 05:53 PM
The file in 4share.com keep disconnecting after downloading 1Gb.
My link is valid.

henry3499
2018-11-03, 06:10 PM
Mine keeps disconnecting after downloading 1Gb.it has disconnected upto four times.could you please send me a seperate link I can download
Xcal with it patch and
Xcap with it patch.
Thanks in advance

henry3499
2018-11-03, 06:23 PM
After extracting the 1Gb file it was able to download,these are the files contain in it.the xcal and it patch are missing due to incomplete download.please send me a link I can download the xcal and it patch.thanks

https://www.upload.ee/files/9147581/Xcal.png.html

slava121
2018-11-03, 06:54 PM
Check the limit on the amount of downloaded files in your Account at 4shared.com


After extracting the 1Gb file it was able to download,these are the files contain in it.the xcal and it patch are missing due to incomplete download.please send me a link I can download the xcal and it patch.thanks

https://www.upload.ee/files/9147581/Xcal.png.html

henry3499
2018-11-03, 07:15 PM
I will do that now.thanks

henry3499
2018-11-03, 07:20 PM
Just check now,am having daily limit of 3Gb and 30Gb for monthly limit

henry3499
2018-11-05, 12:54 PM
Hi engine-driver
I have enable my test mode
Type this cmd C:\Windows\System32\drivers\multikey.sys to register
Restart my pc
Run install.cmd as administrator
But this is what am getting
https://www.upload.ee/files/9154865/xcal.PNG.html

henry3499
2018-11-05, 02:56 PM
I succeeded in starting only xcal M
Each time I click on the icon on desktop,it will display
No valid lock key found.hard key soft key not found.do u want to continue with replay only mode?
Then i will click on yes
The program will open as shown
Workspace
https://www.upload.ee/files/9155210/xcal_m.PNG.html
About
https://www.upload.ee/files/9155211/xcal_m_2.PNG.html

Xcap M
When I try to run the program on the desktop,it will display
The program will close
Hard key-keylock is not found

I guess it may be because I haven't install java on my laptop.
Please do tell me if the problem is because of the java I haven't install.
Thanks

henry3499
2018-11-06, 05:41 AM
Still having the same issue after installing java.
I can only start xcal only in replay mode
Xcap is not starting,it displays hard-key keylock is not found

henry3499
2018-11-09, 01:50 PM
Please anyone who has successfully install xcal and xcap should please help me out with mine.I have team viewer.i have tried so many times to install xcal and xcap but all is not successful. Can't run xcap ,and I can only run xcal in replay mode which does not support some vital features

engine-driver
2019-06-11, 04:36 AM
Hi,
I’ve revised my old posts in this thread due to comments from several users about not working XCAP-M 5.13.51.0. That’s true, it’s not working with the provided 000071AE.reg license. So, I’ve found another working XCAP-M 5.8.03.

The fully functional XCAP-M (neither XCAP-Lite nor XCAP-C):
Log_1 (https://i.postimg.cc/7ZFZM33X/Log-1.png)
Log_2 (https://i.postimg.cc/6QC5H8zK/Log-2.png)
Info (https://i.postimg.cc/Nj90HJH5/Info.png)
The logs (.drm files) are not mine.

I’m aware that this is a very old version useless for professionals. However, the fully functional XCAP-M 5.8.03 should be a good starting point for beginners.

Conclusion:
It’s hard to expect a progress in this thread. The reason is the lack of newer dumped licenses.

hp3hp3
2019-06-11, 05:45 AM
do u have last version of Xcal-m and Xcap-M installer setup ?

[QUOTE=engine-driver;272878]Hi,
I’ve revised my old posts in this thread due to comments from several users about not working XCAP-M 5.13.51.0. That’s true, it’s not working with the provided 000071AE.reg license. So, I’ve found another working XCAP-M 5.8.03.

The fully functional XCAP-M (neither XCAP-Lite nor XCAP-C):
Log_1 (https://i.postimg.cc/7ZFZM33X/Log-1.png)
Log_2 (https://i.postimg.cc/6QC5H8zK/Log-2.png)
Info (https://i.postimg.cc/Nj90HJH5/Info.png)
The logs (.drm files) are not mine.

I’m aware that this