iBwave Design Release Notes 8.0.0.134

[Roman99]

What's new in iBwave 8:

https://www.ibwave.com/products-solutions/whats-new

[Roman99]

The following issues have been resolved in iBwave Design 8.0.1.137:

-Floor plan appears smaller than original size when opening IBWM file with A3 page layout.
-Encountered calculation refresh issues.
-Extra shapes appear on plans after importing walls.
-Unable to import DWG files.
-Imported wall image is rendered small and not centered on plan.
-Encountered missing shapes in images imported in CAD files.
-Allow import and export to ,IBWM option for all products except Viewer licenses.
-An image on a duplicated plan reverts back to the original after changes are made and when switching between plans.
-The Duplicate button is disabled in the DB Editor when a public component is selected.
-Cannot open certain upgraded 8.0 Mobile projects in Design.
-Setting the prediction area can cause the application to stop working.
-Cannot load automation templates from previous version 7.0.
-Changes in SNIR MIMO maps due to TDD calculations impact existing designs.
-Encountered critical errors in capacity maps.
-LTE FDD is not calculated correctly in capacity.

[husseinmanaf]

dear

do you have installer plz

BR

The following issues have been resolved in iBwave Design 8.0.1.137:

-Floor plan appears smaller than original size when opening IBWM file with A3 page layout.
-Encountered calculation refresh issues.
-Extra shapes appear on plans after importing walls.
-Unable to import DWG files.
-Imported wall image is rendered small and not centered on plan.
-Encountered missing shapes in images imported in CAD files.
-Allow import and export to ,IBWM option for all products except Viewer licenses.
-An image on a duplicated plan reverts back to the original after changes are made and when switching between plans.
-The Duplicate button is disabled in the DB Editor when a public component is selected.
-Cannot open certain upgraded 8.0 Mobile projects in Design.
-Setting the prediction area can cause the application to stop working.
-Cannot load automation templates from previous version 7.0.
-Changes in SNIR MIMO maps due to TDD calculations impact existing designs.
-Encountered critical errors in capacity maps.
-LTE FDD is not calculated correctly in capacity.

[Roman99]

Sorry guys, I don't have iBwaveDesign v8 setup files.

[riverstreamer]

Hi husseinmanaf,

Do you know how we can generate a free FULL license for iBwave 8 if u have it in hand ?

[krobelux]

dear

do you have installer plz

BR

installer already there at forbidden stuff..

[Roman99]

The following issues have been resolved in iBwave Design Version 8.0.2.141:


Missing file format types when exporting to IBWC collection data.

[Roman99]

The following issues have been resolved in iBwave Design Version 8.0.3.144:


Power should not flow out of the OIM card when a Design project file created in a previous Design version 7.0, is opened in Design version 8.0.
The debug message "A single system cannot be used by multiple sources" that applies to regular DAS setup – for example BTS that has same operator/technology/band/sector – should not be displayed for Clustered Small Cell setup.
Resolved revision and data corruption errors.
The Maximum Achievable Data Rate MIMO output map does not output the expected values with respect to MIMO Gain properties.
An attempt to import iBwave projects to Mentum Planet a second time after a first failed attempt is prevented by an error that detects items already found in dictionary.

[Roman99]

The following issues have been resolved in iBwave Design 8.0.4.150:


Negative heights for inclined planes cause problems in calibration and prediction vs. measured data report.

[Roman99]

The following issues have been resolved in iBwave Design 8.0.5.157:


Display both MIMO paths in Horizontal Link Budget reports.
Missing interpolation on survey points whose survey data was previously imported from iBwave Mobile.
Access to iBwave Drive folders is inconsistent with set folder privileges.
The 'Max Average Power' warning message appears on a splitter whose composite power does not exceed the value set in Part properties.
Cable connected to antenna on MIMO Path 2 is not displayed on Horizontal Link Budget report nor on Custom XML export.
Remove thermal noise floor limitation for UWB technology.

[Roman99]

The following issues have been resolved in iBwave Design Version 8.0.6.170:


Deleting all output maps in a project causes the application to stop working.
Adding a zone on the default layer of a layout plan – in single mode – causes the application to stop working.
Power distribution is incorrectly calculated for service groups.
Missing option to add remote modules on same optical interface module for a power sharing service group.
The application stops working when in a manual survey a combination of scrolling and zooming is done while collecting data points.
The reference signal power is not updated when LTE bandwidth is changed for multiple sectors.
An empty Horizontal Link Budget report is generated due to mismatched strands in optical connectors.
Missing legend color scheme localization for Map Subtraction map.
Due to changes to capacity settings in version 8.0 a project saved in 7.0 format does not work when opened in iBwave Design version 7.0.

[Roman99]

The following features are included in iBwave Design Version 8.1.0.94:


New user interface and enhanced user experience.
Supported Wi-Fi survey collection with multiple Wi-Fi adapters.
Enhanced Startup page now includes a list of task-oriented videos.
Resolved issues.

[hp3hp3]

iBwave Design Release Notes 8.1.0.pdf

[jayrussel]

Hi sir,

I do not have access to forbidden stuff, could you please share the iBwave installer, please...thanks

[Roman99]

The following features are included in iBwave Design Version 8.1.1.107:


Updated SQLite to version 3.17.0.
Improved performance to eliminate navigation delays.
Ability to install iBwave Design from command line without installing Error Report, Zendesk or Team Viewer.
Connecting a dynamic cable to a component with number of strands that's incompatible with the cable, causes the application to stop working.
VPLE results of different environments are shifted to wrong floors when ground floor is not at ground level.
Non-USA date format is not supported for predictions.
Some *.svp projects cannot be opened due to unrecognized format.
Vex files created in version 6.6 cannot be opened in the current version.

[Roman99]

The following features are included in iBwave Design Version 8.1.2.123:


Systems display the wrong Reference Signal Power value.
Cannot import a .DWG file due to 'index out of range' error.
Printing a project to PDF displays the color pixels slightly off the plan.
When selecting a wall with a single-click another wall is selected.
Walls are incorrectly selected when moving around the walls.
Aligning a line flush with the top of a plan causes the application to stop working.

[hp3hp3]

iBwave Design Release Notes 8.1.2





The following features are included in iBwave Design Version 8.1.2.123:


Systems display the wrong Reference Signal Power value.
Cannot import a .DWG file due to 'index out of range' error.
Printing a project to PDF displays the color pixels slightly off the plan.
When selecting a wall with a single-click another wall is selected.
Walls are incorrectly selected when moving around the walls.
Aligning a line flush with the top of a plan causes the application to stop working.

[rfoptman]

anyone may share the latest installer for Ibwave design here please?

[Roman99]

The following features are included in iBwave Design Version 8.1.3.142:


Encountered Index out of range error in Capacity map.
Certain conditions cause a critical error when running output maps.
Exported components contain incomplete data in vex files.
The Ambient Noise for Wi-Fi technology should not be limited to -85 dBm.
Annotations type layers are displayed multiple times in the Layers panel.
Slow performance when running predictions.
Unable to generate the Annotations report.


The following features are included in iBwave Wi-Fi Version 8.1.3.141:


Systems display the wrong Reference Signal Power value.
Missing APs in the Data Review list of Passive survey list.
Exported components contain incomplete data in vex files.
The Ambient Noise for Wi-Fi technology should not be limited to -85 dBm.
Missing the Capacity Zone layer in Layers panel.

[Roman99]

The following features are included in iBwave Design Version 8.1.4.144 and iBwave Wi-Fi Version 8.1.4.143:


Only default environment was taken into account after running the prediction.
Fixed performance issue affection Prediction engine.

[shahnavazi]

Sorry guys, I don't have iBwaveDesign v8 setup files

[Roman99]

The iBwave Design Version 9.0 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs. The highlighted features are:


Revamped User Interface for improved User Experience
Support for 3D Antenna Patterns
Smart Antenna Contours
Flexible Mount Orientation
Support for Multiple Radios
New Cut out Exclusion Areas in Prediction Areas
Consider Atriums in Prediction Calculations
Ring Cut of Fiber Strands to Span Across Floors
New Cable Route for Modeling Cable Trays and Pipes
New Fiber Link Budget Report
New Custom Properties for Components
Other improvements

[Roman99]

The following issues have been resolved in iBwave Wi-Fi Version 8.1.5.148:


Signal for both MIMO streams passes through a media converter when only one path is associated.
Unable to connect two components on a layout plan.
The Insert menu is not intuitive enough.
Change the location of the Quick Toolbar.
Inconsistent color of selected buttons in ribbons.
Zoom options are displayed twice.
The borders between tab headers are not clearly shown.

[congtrung1985]

Hi all.
I need licsence for ibwave. Please pm me

[Roman99]

The following issues have been resolved in iBwave Design Version 9.0.1.147:


Missing Mechanical Downtilt value for Antenna's property.
Encountered timestamp format error after importing survey data.
Unable to import customized ribbon with software version upgrade.
Dynamic Cable length value is replaced with Order Length value in cable property.
Exported Cost Details report has the wrong Total Per Floor value.
Moving a Via with the keyboard arrow keys does not consistently move the attached cables.
Application stops when attempting to import wall image.
Application stops due to DPI settings.
Unable to snap a wall on itself using Snap to Lines.
Floor plan images with Proportional Fit to Page does not work properly.
Unable to configure subbands for repeaters.
Cannot open file with modeled orphan Fiberspot.
Unable to model a hole across floors with an old file.
Cannot generate Antenna and Link Budget reports when BTS is linked by fiber connectors.
The output Map report generation stops before completing the report.

[OptimiNSN]

Hi Do you have User Manual?

[Roman99]

Hi Do you have User Manual?

No, I don't have. Sorry!

[Roman99]

The iBwave Wi-Fi Version 9.0 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs:


New Quick Toolbar and Enhanced User Experience
Support for 3D Antenna Patterns
Support for Multiple Radios
Flexible Mount Orientation
New Cut out Exclusion Areas in Prediction Areas
Consider Atriums in Prediction Calculations
Ring Cut of Fiber Strands to Span Across Floors
New Cable Route for Modeling Cable Trays and Pipes
New Custom Properties for Components
Other improvements


The recent version is 9.0.2.162.

[Roman99]

The following issues have been resolved in iBwave Design Version 9.0.3.184:


Importing a Mobile project to an older version of Design should not be allowed.
A resized legend reverts to original size when project is saved with prediction map turned off.
Moving an antenna using the keyboard shortcuts does not move its contours.
The NAN label should not appear twice for Corning One remote units.
Enabling the cable length layer causes the application to slow down.
The Capacity output map does not yield accurate results.
Auto replacement does not work on bi-directional radio transceiver equipment connected to existing antennas.
Survey data DL, UL and Cell ID legends are empty.
Attempting to open a project with enabled Multiprocessor mode causes a Corrupt File error message.
Missing Horizontal and Inclined Surfaces options from the Modeling ribbon.
Filtering with BSSID does not work for Wi-Fi passive survey.
Fiber spots generate 'Outside of allowed Range' error messages in debug list.
The EMF Report is aborted when a media converter is not associated to all systems.
The Auto replacement error message for unsupported twisted pair cables is ignored.

[amadeo]

We might need to create separate forum for ibwave/smal cells/DAS. What do you think experts?

[Roman99]

The iBwave Design Version 10.0.0.88 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs:


Supported frequency reuse architecture
Body loss modeling
Best server maps with 2nd, 3rd and 4th order
LTE handoff matrix
Supported LTE-LAA band
Additional data in antenna report
Version compatibility and upgrade
Enhanced wall appearance and material
Usability improvements

[Roman99]

The following issues have been resolved in iBwave Design Version 10.0.1.92:


The Cost Details report does not apply the cost information set in part properties.
The application stops working under certain conditions when accessing Calibration/Txlds.
Changing from LTE-A to LTE keep carrier aggregation parameters.
Prediction is not calculated when RF power unit is set to WATT.
MIMO RSRP path 2 power is not converted when the RF power unit is changed.
Unable to import .DWG file.
Certain conditions with excluded areas not configured properly causes file corruption.
Deleting a small cell causes the application to stop working.
Unable to open automation tool configuration file that is created in version 10.
Fiber cable length is miscalculated in Fiber Link Budget report.
Application running on Windows 7, stopped working when accessing output maps configurations in project properties.
Exported plan images are misaligned when cropped.
Unable to modify or to save any material in DB Editor application.
The output map displayed on a floor plan is not always refreshed when another output map is selected.
The Compliance report is not always generated.
The body loss zone height is incorrect when inclined surface arrow points from right to left.
The Design revision option is no longer available when selecting Save to Server.
The iBwave Viewer cannot open mobile files previously saved to the Cloud.
Missing attachments in Error Reports.

[kamy]

hopefully we have the installer soon


The following issues have been resolved in iBwave Design Version 10.0.1.92:


The Cost Details report does not apply the cost information set in part properties.
The application stops working under certain conditions when accessing Calibration/Txlds.
Changing from LTE-A to LTE keep carrier aggregation parameters.
Prediction is not calculated when RF power unit is set to WATT.
MIMO RSRP path 2 power is not converted when the RF power unit is changed.
Unable to import .DWG file.
Certain conditions with excluded areas not configured properly causes file corruption.
Deleting a small cell causes the application to stop working.
Unable to open automation tool configuration file that is created in version 10.
Fiber cable length is miscalculated in Fiber Link Budget report.
Application running on Windows 7, stopped working when accessing output maps configurations in project properties.
Exported plan images are misaligned when cropped.
Unable to modify or to save any material in DB Editor application.
The output map displayed on a floor plan is not always refreshed when another output map is selected.
The Compliance report is not always generated.
The body loss zone height is incorrect when inclined surface arrow points from right to left.
The Design revision option is no longer available when selecting Save to Server.
The iBwave Viewer cannot open mobile files previously saved to the Cloud.
Missing attachments in Error Reports.

[amadeo]

hi congtrung, sis you get any response on this?

[Roman99]

The following issues have been resolved in iBwave Design Version 10.0.2.098:


Survey data contains incorrect Datetime format.
Service groups are reset once components are deleted.
A Unity project with an empty currency causes a Design project failure.
Layout plans exported to images are misaligned.
Duplicating a transceiver does not duplicate the properties of its sources.
Images on floor plans are misaligned after exporting to image or .PDF format.
Add a button to give users the option to open a folder containing project settings.
PCC configuration is not set when an LTE-A radio head with PCC configuration is dropped on design plans.
The prediction map is misaligned in the Output map report and when exporting the map to an image on a floor plan.
Prediction results are not displayed at the right height in 3D viewer.
The atrium hole on a horizontal or inclined surface remains in place even when the surface is moved or rotated around the floor plan.
The Reset license button is mistaken for the OK button and must be moved.
The PCC setting is not configured by default, preventing users to run LAA maximum throughput map.
The LTE RSRQ and LTE Total Received Power maps do not consider assigned channels.
Incorrect capacity results are calculated for WCDMA.

[Roman99]

The following issues have been resolved in iBwave Design Version 10.0.3.102:


File type in file name must be generic across iBwave desktop applications.
Cable takes a long route to connect parts across floors through Vias.
It should not be possible to connect to a single connector twice.
A fiber connector mismatch warning is erroneously triggered for correctly configured connectors.
Power sharing is not properly calculated in version 10, but perfectly working in version 9.
Copying and Pasting racks/sub racks with modules does not properly duplicate the exact number of modules.
Vias connecting two components on separate floors are placed outside the layout plans.
The DB Editor is not able to connect to Unity server with Proxy settings.
Layer position is not maintained after copy-and-paste components.
The exclusion area property is not duplicated after copy-and-paste.
Capacity calculations are not correct for WCDMA.
When considering interfering sector in SNIR map, the prediction on inclined surfaces is not affected.
The application stops working when deleting plans in a project.
The capacity results are not consistent with the capacity values in the MADR legend.
The Zendesk chat widget is blank.

[zulasmi]

hi mate, i would train a bit for indoor 3g 4g . do you think ibwave is the right tool?in case is there any installer available and med? no need last version as it is for training.best

[zulasmi]

any way to get the serial? pm?

[Roman99]

The following issues have been resolved in iBwave Design Version 10.1.0.108:


Surveys should only consider heights of prediction areas.
Prediction results are not displayed at the correct height in 3D viewer.
Updating the Inventory # with a string yields a NaN in Part Properties.

[Roman99]

The following issues have been resolved in iBwave Design Version 10.1.1.114:


Selecting parts in Design Plans causes the 'Floor' combo box to display a null value.
The application closes unexpectedly when attempting to open a project with Corning fiber cables.
Custom cable IDs are incorrect in Link Budget Report.
5GHz-LTE-LAA band 46 should be sub-divided to band 252, 255.
Moving the mouse across a Floor Plan can cause a lost image and as a result the application stops working.
Enhanced feature: Include Picture Plans and Design Plans in the Annotation Report.
Custom cable IDs are incorrect in Cable Routing Report.
The application stops working when attempting to delete a picture plan.

[sonproo]

Ibwave 10.0.0.88_x64 installer
https://www.fshare.vn/file/EFMKOGY6OMSS

[sonproo]

Ibwave 10.1.1.114_x64 installer only
https://www.fshare.vn/file/4EEI3NPEJAHB

[Roman99]

Ibwave 10.1.1.114_x64 installer only
https://www.fshare.vn/file/4EEI3NPEJAHB

Thanks a lot! Do you have the 32-bit installers?

[sonproo]

Thanks a lot! Do you have the 32-bit installers?

Yep, i will upload soon

[ssmc]

Ibwave 10.1.1.114_x64 installer only
https://www.fshare.vn/file/4EEI3NPEJAHB
i can't download it from this site. how to do it? thx.

[Roman99]

i can't download it from this site. how to do it? thx.

Yes, it's not trivial if you don't speak Vietnamese.
Use your gmail.com account to login.

[joaoo]

Ibwave 10.1.1.114_x64 installer only
https://www.fshare.vn/file/4EEI3NPEJAHB

Any version of iBwave with medicine?

[vietda]

Some can share any ibwave tutorial ..

[Roman99]

The iBwave Design Version 11.0.0.86 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs:


Improved MIMO modeling
New prediction map for all MIMO paths
Updated map configuration with MIMO
Improved performance of large files
Improved cable route modeling for trays and conduits
Quick connection tool
Supported cable risers
Usability improvements


The installer supports 64-bit operating systems only! :(

[Roman99]

The following issues have been resolved in iBwave Design Version 11.0.1.91:


The connector's gender and type are not validated properly in the Connection Tool.
Wrong pictogram is displayed when adding cable route from preferred parts list.
MIMO calculations causes the power to double in value on an SISO antenna.
Generating the Output Map report containing a Dominance Over Macro map without survey data can cause the application to stop working.
Attempting an invalid optical cable connection causes an application failure.
The 'Transform to direct link cable' option that replaces 'Follow component height' does not behave as expected.
Index is out of range during the prediction of MADR map.
Selecting a source-side Fiberspot causes the Connection tool to stop working.
The wrong tooltip description appears for the Quick Connection Tool icon in the Network Design banner.
Setting the height of a horizontal surface does not launch the Set Height window.
The Multiplexing option does not work properly for SISO systems.
Modifying two access points with the property grid causes the application to stop working.
The Electromagnetic Field report does not show the correct composite power values.
Changes to the system properties from the Properties panel are not applied.
Unable to add parts in preferred parts list using the right-click shortcut.
The Capacity Definition information text has a typo.
In an incomplete connection where other parts are missing, double-clicking on an MRU can cause the application to stop working.

[Roman99]

The following issues have been resolved in iBwave Design Version 11.0.2.95:


Annotations are misaligned after floor image is cropped.
Body loss is not applied properly if antenna height above the floor is less than the set Body loss height.
Part ID labels are misplaced when connecting multiple cables on Risers.
Warning messages related to leaky cables appear on generated LTE RSRP prediction maps.
Changes made to antenna patterns in the DB Editor are not updated in Design even after synchronization is completed.
The page borders are missing on new Floor Plan or Design Plan pages.
The legend for the Maximum Achievable Data Rate map is missing the highest data rate achieved value.
A critical error is encountered when running the Service Count map.
The Print Preview option yields a blank page.
The wireless service settings remain enabled despite incompatible systems.
The LTE Reference Signal SNIR prediction map yields unexpected results.
The LTE Overlapping zone map shows unexpected results.

[blaster949]

Bro
Is any med available?

[Roman99]

The following issues have been resolved in iBwave Design Version 11.1.1.124:


Unable to change the port of a cable if connected to a Riser.
LTE RSRP probe results are not always accurate and showing the wrong sector by matching the selected best path.
Cables selected for Cable Route Magnet do not follow the path of the cable route.
Changing the properties of multiple Signal sources, causes the properties to reset and match those of the first Signal source.
Prediction results for Signal Strength map change when changing antenna gain unit from dBi to dBd.
Unable to use the mouse in Walkthrough mode of the 3D Viewer, when connected via Remote desktop.
MIMO Ranking settings revert to default values even after saving changes made.
Deleting a band after duplication causes the DB Editor to stop working.

[Roman99]

The following issues have been resolved in iBwave Design Version 11.1.2.131:


Running an LTE RSRP map with old PredData files causes the application to stop working.
Mismatched legend's color with pixel colors on Capacity map.
A Via is unnecessarily created on a floor plan between 2 units located on the same floor.
Connecting a Corning OIM-LC card to a media converter with Fiber Bulk cable causes an unexpected error.
The MIMO Ranking Settings in Project Properties should be part of the general license, available to all license holders.
Under certain condition, changing the text color in Rich Text Box can cause the application to stop working.
Dominance Over Micro prediction results seem inaccurate for MIMO systems.
A large Annotation report can fail to generate due to out-of-memory issues.
The Quick Connection Tool fails to connect cables right after users click Clear when connecting parts.
Fiber cables connected through Risers have incorrect cable lengths.
Cable route properties in software version 10 are reset to default settings when the same project is opened in an upgraded version.
Changing a cable connection to another part in Design plan causes file corruption error.
Moving a cable connection to a part on a different floor in Design plan does not create a riser on floor plans.
Prediction does not work when remotes are associated using service group templates.

[Roman99]

The following issues have been resolved in iBwave Design Version 12.0.0.63:


5G NR System Configuration
All Numerology Values, Bandwidth Parts, TDD Slot Configurations
All Sub-6 and mmWave Frequencies and Bandwidths
New 5G NR Output Maps (SS-RSRP), (SS-SNIR), (PDSCH-SNIR)
Adjusted Output Maps for 5G-NR
Multibeam VEX File Support
Updated Proprietary Material Propagation Properties
Improved Body-loss Measurements for the 21 GHz frequency
Calibration of 5G Designs Using CSV Data Imports
iBwave Unity and iBwave Mobile Support
Improved Performance for DAS Modeling
Improved Curved Walls Modeling
New Diagonal Walls and Walls Under Inclined Surfaces
Single Sign-On Integration
Silent Install and License Activation

[Roman99]

The following issues have been resolved in iBwave Design Version 12.0.1.75:


Fiber Cable IDs are not displayed after pushing or pulling a part through a Riser.
The 'View full coverage pattern' option does not work when a float value is entered in Antenna properties for antenna beams.
Changing a System's color can cause the application to stop working.
Entering an invalid value in the Indoor Prediction Legend can cause the application to stop working.
The Part ID font is initially empty at first attempt but is then populated on subsequent attempts.
Saving a project back to version 11 causes the survey trace data to disappear.
Running Capacity map with several technologies causes a critical error.
Encountered prediction issues with curved exclusion areas.
New version number error is not displayed when opening a project in an older version.
Adjusting wall height under inclined surfaces on higher floors causes an error.
Unable to use version 11 output map legend templates in version 12.
Changing the legend templates causes an error.
Survey points are not synchronized when resizing the survey on floor plans.
The <Shift> key does not work properly when scaling in floor properties.
Unable to import calibration files from version 11.0.
Wrong string is displayed in Login information.
Calculations on Corning projects does not work properly with Light calculation option.
Unable to change beam values for multi-beam antenna in Part property.
Merging walls with Maximum Optimization causes the application to stop working.
Cannot delete a wall using the <Delete> key.
Importing an image file into the Layout plan and then attempting to right-click causes the application to stop working.
Survey points remain in place when survey trace is rotated.

[calvin]

does anyone got working med.

[Roman99]

The following issues have been resolved in iBwave Design Version 12.1.0.15:


Merging imported walls takes too long to complete.
Moving imported walls around a floor plan causes a delayed application response.
Scaling imported walls on floor plans takes longer than expected.
Power sharing calculations are incorrect on a design with cascading remotes.
Power is not propagated properly for Corning OIU chassis when using Light Calculation feature.
Remote units with disabled auto-calculations should still be allowed to associate to service groups.
Incorrect result when rotating an inclined surface by 90 or 180 degrees.
Incorrect propagation calculations in large areas using the latest 5G materials. Transmission loss values are missing for high frequencies.
Survey points remain unrotated when survey trace is rotated on floor plans.
Online Components are not downloaded from the browser.
Cable route properties edited in the Mobile application do not match those when opened in the Desktop application.
Add a language setting in Options panel.
Adding survey interpolation for outdoor signal to the LTE Reference Signal SNIR map does not have an impact on the prediction results.
Dropping a legend on an imported outdoor map yields an empty legend.

[Roman99]

The following issues have been resolved in iBwave Design Version 12.1.1.26:


Unable to download a Site containing a Design project file.
The 5G NR SS-RSRP output map does not include all transmitters in the prediction calculation and output.
An error is encountered when calibrating a model for 5G NR.
Power sharing calculations showing NaN when same system is distributed over multiple POIs.
Cannot import a .csv survey file.
Technologies are missing for selected bands when creating wireless services.
The iBwave Drive encounters an error when attempting to upload a non-.ibw file.
An error is encountered when attempting to change LTE properties > sources parameter.
Updates are made to the default database of components.
Setting custom dimensions on a plan area resets the Plan Area setting.
Legend percentages and compliancy values in current version are different from those in version 12.0.2 for the same project.

[kvf]

iBwave Release 13
see some info: https://info.ibwave.com/design-release-13?utm_source=pardot&utm_medium=email&utm_campaign=product-launch-release-13-landing-page

[DomDom]

Ibwave 10.1.1.114_x64 installer only
https://www.fshare.vn/file/4EEI3NPEJAHB


Sir
can you upload on 4shared/Mediafire ?

BR,

[Roman99]

The following issues have been resolved in iBwave Design Version 13.0.1.79:


Cannot change the project date when Windows regional format is set to French.
Floor plan tab is not updated with the new floor plan name.
Curving an advanced inclined surface can distort the segment.
Modifying a list of systems in a project with many plans can cause the application to stop working.
Opening a project in 2 different versions, specifically release 11 and release 12, results in different errors related to Optical Budget.
Pasting a copied wall at a cursor location does not work properly.
Loading an automation tool template from a previous version causes the application to stop working.
Changes to Equipment Limit (# clients) are not saved.
Opening a Design Enterprise project in Design Lite version allows users to copy and paste active components.
A .DXF export to a single file appears to have overlapping boxes and legends.
The 5G NR SS-RSRQ output map has incorrect results.
Unable to change output power on multiple Access points at one time.
Cable lengths in imperial measurement appear incorrect.
Missing scroll bars in the Position Label menu.
The Position Label option appears twice in the cable label drop-down menu.
Cable heights in 3D Viewer are incorrect in imperial measurement.
Pulling a Riser part causes the application to stop working.
Changing the Signal source for 5G NR in the property grid causes the application to stop working.
Enable the option to position labels on Floor plans as on Design plans.
Cables routed through cable trays have the wrong imperial height measurement in the 3D viewer.
The Korean application version crashes when changing Wi-Fi Channel for an access point.
Missing a notification for 'Riser is created' in the Quick Connection Tool.
Increase the size of the Plan Properties window to avoid scrolling.
Unable to modify server connection at a failed login.
Unable to open older files in version 12.1.1.26.
Output map reports that has 14 pages or above are printed out of sequence.
The file type is not available when exporting 'save as' annotations.
Generating end walls for inclined surfaces also generates extra unnecessary walls.
An English message is displayed for the default outdoor plan of a new project when using the Korean software version.
Antenna positioning changes revert to previous settings. Changes must be refreshed manually.
A 'corrupted file' message is displayed when attempting to load files in parallel.
Improve quality of images in reports.

[Roman99]

The following issues have been resolved in iBwave Design Version 13.0.2.123:


Custom heights are now added on Risers.
Textboxes are covered by text edit options not allowing users to easily edit the text.
A column in the Cost Detail Report is improperly formatted and does not display the correct value.
The DB Connection configuration resets to the local drive after restarting the application.
Picture outlines appear inconsistent in Picture plans.
Not all annotations are copied after cut-and-paste.
Imported survey points are not properly aligned on floor plans.
Date format changes does not synchronize with changes in Windows settings.
Unable to import floor plan from .pdf file format into a duplicated floor.
Unable to save a project in a previous version when opened in Version 13.0.
Maintain the connection sequence of twisted cables from Source side to Mobile side in the Cable Routing Report.
Prediction results are not displayed on sections of a previously extended prediction area.
Some pixels are not visible in SS-RSRP output map and showing white space on map.
No difference is shown in prediction results between combined and non-combined options in 5G SS SNIR and 5G PDSCH SNIR output maps.
Errors are encountered when running prediction after collection is modified.
Added supported 5G NR bands from 3GPP R16.

[kvf]

iBwave Release 14
https://info.ibwave.com/release-14?utm_source=pardot&utm_medium=email&utm_campaign=product-launch-release-14-landing-page

[Roman99]

The iBwave Design Version 14.1 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs:

Risers and unassigned components
Component Automation Tool (CAT)
Export and import components using a flat XML file that is more friendly with Excel
Calculation usability improvements
Selectively display calculations for a group of components
CCI interpolation map from survey data
Visualization of CCI from Passive Survey Data, including Interpolation.
Addition to CCI in the Survey Data Report
Donor Antenna Isolation - worst antennas
List of up to 10 worst antennas contributing to the DAS feedback making the Donor Antenna Isolation failing.
Compliance Areas reporting
Apply Compliance Criteria to a compliance area and view reporting on those areas
Aggressive EMF
Apply a Safety-Margin to EMF calculations

[Roman99]

The following issues have been resolved in iBwave Design Version 14.1.2.76:


Templates created in Version 13 occasionally did not work in Release 14
Replacing Components did not fully change MIMO Configuration
Corning service group showing empty lists when attempting to set it up

[Roman99]

The following issues have been resolved in iBwave Design Version 14.2.0.42:


Syncing to a different Components Database can affect Antenna Pattern Properties
Unexpected value of the antenna gain of remote unit when antenna report and link budget report is generated
5G Dominance over macro considers RSSI in Given value instead of SS-RSRP as noted in the map
Incorrect Unit and Base Values in 5G-NR RSRQ Output Maps
CBRS Band 48 Missing from LTE-A Technology
Survey Template Import Throws an Error
Compliance Target Value for 5G NR is in kbps, not Mbps
Prediction Data Missing from an Inclined Surface
Custom text is changed when duplicating a floor plan (or picture plan)
Inconsistent behavior for the Height above floor error message via vs riser
Maximum Achievable Data Rate map legend is duplicated
Wifi channel bandwidth resets automatically to 20MHz when the sources properties are open
Prediction results for Advanced Inclines are missing in the 3D Viewer of iBwave Viewer
RRU missing 4x4 MIMO configuration and connectors
The Risers height pushing cables higher than it should
Export to (legacy) XML from DB Editor is breaking the structure of the XML file
Advanced inclined surface height do not change correctly when using Imperial units
Crash when user opens a survey from QualiPoc
Mobile Planner - Some LTE Maps not running well on Android 8.1.0
Incorrect Success message when importing a component with CAT
Beamforming XML file generating an error when uploaded in DB
Opening from Server in Design throws a file corrupted error
Desktop Client Authentication Error through SSO OIDC

[Roman99]

The iBwave Design Version 15.0.0.43 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs. The highlighted features are:

iBwave Reach Integration
LTE Uplink MADR Output Map
Addition of 1.4MHz Block for TDD LTE-sXGP Band 39 for Japan
New Signal Source subcategories in the Parts Database for IoT Components: Gateways and End-Devices

[Roman99]

The iBwave Design Version 15.2.0.46 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs. The highlighted features are:

5G uplink MADR output map
5G slot configuration updates
iBwave Reach multi-building IBW file support
Survey data UI improvement
Outdoor plan creation

[hp3hp3]

The iBwave Design Version 15.2.0.46 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs. The highlighted features are:

5G uplink MADR output map
5G slot configuration updates
iBwave Reach multi-building IBW file support
Survey data UI improvement
Outdoor plan creation


hi
do u have last version setup file ?

[Roman99]

hi
do u have last version setup file ?

No, I don't. But I'm looking for it.

[Roman99]

The iBwave Design Version 16.0.0.56 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs. The highlighted features are:

Updated Field Strength (EMF) Output Map and Reporting
Uplink SNIR Output Maps for 5G and LTE
New Combined Survey Supporting Neighbor Cells
Updated KPIs Node and Filtering Table
Additional KPIs supported by the Survey Data Interpolation
New Packaged Report

[Anna@Rantastic]

Dear all, we have made a tool for indoor radio planning directly in AutoCad, you're welcome to try www.ran-tastic.com (http://www.ran-tastic.com)

43199

Br,
Anna

[Roman99]

The iBwave Design Version 16.1.0.48 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs. The highlighted features are:

LTE and 5G NR MIMO Curves
Improved Packaged Report Functionalities
New Cellular Survey Data Structure Improvement

[Roman99]

The iBwave Design Version 16.2.1.65 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs. The highlighted features are:

New Cellular Survey Data Overview tab
Uplink Link Budget Capabilities for LTE and 5G NR
DBEditor Speed Improvements
New Power Density Field Strength Unit (W/m2)
New Wireless Service Table
Generic Multi-Radio Components

[Roman99]

The iBwave Design Version 17.0.1.55 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs. The highlighted features are:

5G Carrier Aggregation MADR Support
Channel-specific LTE Frequency Prediction
New 'Save As' Option to Remove Prediction Data
New Markup tool: Grid Layout
IBWC 1.7 with 5GNR surveys

[Roman99]

The iBwave Design Version 17.1.0.55 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs. The highlighted features are:

C-Band Frequency Support for LTE and 5G NR
Small Cells Now Support Multiple Operators on the Same Band
Save/Load Template Reports to/from Unity
MAC Address and Serial Number Added to Cross-Reference Report
Apply Total Number of Points Based on Filter in Survey Data Legend
Change Band Column from Frequency to Band Name in Cellular Filter Panel

[Roman99]

The iBwave Design Version 18.0.1.60 includes new and improved features aimed at increasing the efficiency and quality of your wireless designs. The highlighted features are:

Added new LTE and 5G NR Bands
Gradient Legend Option for LTE MADR
EMF Report Showing Safety Distance by Wireless System and Total EIRP
New Connector Type Support in the Component Database
5GHz Wi-Fi Channels for USA Update
Active Survey Revamp
New Technologies Added for the Public Safety Field
Support of P25, TETRA and DMR surveys
Upload Generated Reports to Unity