View Full Version : Question Urgent: Tems Investigation On Device POLQA Test
vasili_koslov
2016-10-04, 06:19 PM
Hello Dears,
I need to know how I can do POLQA test On Device Measurement test in Tems investigation? I have tried it .It looks working but I can not see POLQA values. I dont know why. Please help me about this.
You can please find sample sequence in attachment. Is there any missing point? What is the wrong?
Thanks.
murturan
2016-10-04, 08:02 PM
wich phone you use ?
and you make m2m ?
vasili_koslov
2016-10-05, 03:38 AM
note 4 and m2m. do you have a idea?
wich phone you use ?
and you make m2m ?
murturan
2016-10-05, 05:48 PM
Note 4 is ODM services chek pls POLOQ is started ?
can chek with teamviever.
TIGRI007
2016-10-06, 02:15 AM
Check the script for voice source.
vasili_koslov
2016-10-06, 04:56 PM
what you mean? tems not allow me to choice voice sample.
Check the script for voice source.
TIGRI007
2016-10-06, 06:05 PM
what you mean? tems not allow me to choice voice sample.
play with below values
39694
vasili_koslov
2016-10-06, 06:07 PM
on device measurement selected already.
play with below values
39694
TIGRI007
2016-10-06, 06:13 PM
Try Device digital audio
rfoptman
2016-10-06, 07:30 PM
Try Device digital audio
@TIGRI007,
I faced same problem using either of both Audio sources. I tried by note-4 too. BTW did u do it already successfully? then which type of pocket did u use for it?
TIGRI007
2016-10-06, 08:35 PM
I have use it in tems symphony. didn't try in tems pocket.
As I understand:
1- Need to define device phone number in the equipment detail
2- Need to pair phone Pesq/polqa at control->pair device
3- Define voice audio source
unlocktheword
2016-11-16, 10:30 AM
i test note4 can polqa mos
wirelessguy9999
2016-11-28, 08:04 PM
Is your Note 4 retail or packed with Pocket TEMS/ODM? what version?
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.