PDA

View Full Version : E******* 3G cell optimization paramters guide



gopal441
2016-06-02, 09:21 PM
Objective:-

Statistical RNC/RXI/RBS counters reflect the performance of a 3G cell within the network. Specific counters are analysed to detect various faults. The objective of the procedure is therefore to trace any network-related faults to the source of the problem by analysing the fault symptoms evident in the counter values.

Accessibility:-






Admission Control: DL Power
Admission Control: DL Channelisation Codes
Admission Control: UL/DL ASE
Admission Control: Connection Limits
Admission Control: Hardware Usage (Channel Elements)
Failure After Admission: Iub Congestion
Failure After Admission: Core Transport Network Congestion
Failure after Admission: Hardware Usage (Channel Elements)
Failure After Admission: Other



Retainability:-




Soft Handover Drops
Missing Neighbour Drops
UL Synchronisation Drops
Release due to Congestion Resolve Action
Other Reasons for Drops



INTEGRITY




UL Block Error Rate
Drive Test Based Service Quality Measurements
R99 & HSDPA PS Interactive Throughput (RNC Level)
HSDPA (MAC-HS) Throughput (Cell Level)




Others




Considerations for HSDPA: DL Channelisation Codes
Considerations for HSDPA: Iub Bandwidth
Considerations for HSDPA: Throughputs Above 3.6Mbps (Cat 7-10 UEs)
Considerations for HSDPA: Channel Element UsageOffloading Traffic: Directed Retry to GSM
Offloading Traffic: Directed Retry to GSM
Offloading Traffic: Service Based Handover (P5+)

khurrambilal01
2016-06-03, 07:10 PM
No attachment? What is this post meant for.

gopal441
2016-06-05, 03:21 PM
Well i was getting error while attaching the document. So i simply posted the content of the documents. This post describes possible E******* 3G KPIs/parameters.

ouedraogo2d
2016-06-06, 02:38 AM
Well i was getting error while attaching the document. So i simply posted the content of the documents. This post describes possible E******* 3G KPIs/parameters.


Dear,
Where is the content ?

Ghost78
2016-06-07, 06:38 PM
Hi,

If you are not able to attach the document, you should delete this post.

B.R