PDA

View Full Version : Feature - Narrowband Interference Suppression



narutomirror
2016-01-08, 07:26 PM
In my country, one operator have successfully implement 3G U900 (900Mhz), but we found some cells have high RTWP not because of external interference.
After some investigation we found high RTWP due to Narrowband. Huawei have solution to reduce RTWP by implement Feature Narrowband Interference Suppression..

RF engineer
2016-01-11, 11:08 PM
Dear

Can you share the document again, attach have problem .

BR

justdream
2016-01-12, 07:10 PM
Please re-upload, file has error
and kindly could you share KPIs result after implementation

BENRHOUMASALEM
2016-04-22, 01:46 AM
is there similar feature for NSN

javierinfante
2016-05-10, 09:18 PM
HELLO:
if you have to use the NBIS is because you have external interference or intermodulation, the NBIS is a temporal solution only used during the time you are working in the problem.
The activation of the NBIS affect traffic, of course if you have interference it helps and it improve everything but it isnt a permanent solution. Im in Denmark and we have interference problems everyday, comming from HW problems in the site, cable, connectors, antenna..etc. comming from external devices like ship radio repeaters, faulty TV amplifiers..etc. The activation of the NBIS is the last choice when you cant suppress the interference.

lteexpert
2016-08-27, 10:37 PM
I got error when i tried to open pdf file. Could you please check?
Thanks.

paulus
2016-08-28, 09:06 PM
Hi,

The file is damaged, Please re-upload again.

Thanks
BR//Paul

Douda2812
2017-01-21, 12:48 AM
Hi all,
Is there any similat feature in NSN , to reduce interference. Could you also recommend when we increase u900 power from 40 w to 60 w to enhance throughput: is it better to keep the same CPICH or to increase it ?
Please advise.
thanks a lot :)