Tulipa
2015-12-09, 01:03 AM
Dears,
in our network we have activated the feature HSUPA Time Division Scheduling, here are the parameters we out in the network:
chip offset 2ms UE number
HSUPATDALIGNUENUM (http://localhost:7890/pages/GEC0207J/10/GEC0207J/10/resources/EN/UMTS/NodeB/Para/ratU/para/ULoCellMacePara-hsupaTdAlignUeNum.html)
8
Hsupa Time Division Scheduling Switch
HSUPATDSCHSW (http://localhost:7890/pages/GEC0207J/10/GEC0207J/10/resources/EN/UMTS/NodeB/Para/ratU/para/ULoCellMacePara-hsupaTdSchSw.html)
ON
Performance Switch
PerfEnhanceSwitch
OFF
Dynamic CE Resource Management: activated
Dynamic Channel Configuration Control (DCCC) activated
WRFD-01061403 HSUPA 2ms TTI activated
WRFD-010636 SRB over HSUPA activated
but ,
the counter VS.HSUPA.TDMSch.ActRatio is always 0
the counter VS.HSUPA.TDMUserNum.Mean is empty without value
the two counters are activated .
any suggestions please?
Best regards
in our network we have activated the feature HSUPA Time Division Scheduling, here are the parameters we out in the network:
chip offset 2ms UE number
HSUPATDALIGNUENUM (http://localhost:7890/pages/GEC0207J/10/GEC0207J/10/resources/EN/UMTS/NodeB/Para/ratU/para/ULoCellMacePara-hsupaTdAlignUeNum.html)
8
Hsupa Time Division Scheduling Switch
HSUPATDSCHSW (http://localhost:7890/pages/GEC0207J/10/GEC0207J/10/resources/EN/UMTS/NodeB/Para/ratU/para/ULoCellMacePara-hsupaTdSchSw.html)
ON
Performance Switch
PerfEnhanceSwitch
OFF
Dynamic CE Resource Management: activated
Dynamic Channel Configuration Control (DCCC) activated
WRFD-01061403 HSUPA 2ms TTI activated
WRFD-010636 SRB over HSUPA activated
but ,
the counter VS.HSUPA.TDMSch.ActRatio is always 0
the counter VS.HSUPA.TDMUserNum.Mean is empty without value
the two counters are activated .
any suggestions please?
Best regards