fahmi
2015-07-03, 07:23 PM
Dear Experts,
Does any one test the impact of reducing this Timer from 300s (recomanded) on KPIs and user experience.
any relation with PS Inactivity timer ?
Meaning: Timer for not releasing signaling over the Iu-PS interface when no PS RAB is set up. After this timer expires, the RNC sends a RANAP IU RELEASE REQUEST message to the CN.
GUI Value Range: 1~65535
Unit: s
Actual Value Range: 1~65535
MML Default Value: None
Recommended Value: 300
Parameter Relationship: None
Service Interrupted After Modification : No (And no impact on the UE in idle mode)
Impact on Network Performance: If the value of this parameter is too large, the radio resource usage increases.
BR,
Fahmi
Does any one test the impact of reducing this Timer from 300s (recomanded) on KPIs and user experience.
any relation with PS Inactivity timer ?
Meaning: Timer for not releasing signaling over the Iu-PS interface when no PS RAB is set up. After this timer expires, the RNC sends a RANAP IU RELEASE REQUEST message to the CN.
GUI Value Range: 1~65535
Unit: s
Actual Value Range: 1~65535
MML Default Value: None
Recommended Value: 300
Parameter Relationship: None
Service Interrupted After Modification : No (And no impact on the UE in idle mode)
Impact on Network Performance: If the value of this parameter is too large, the radio resource usage increases.
BR,
Fahmi