javierinfante
2015-05-15, 05:47 PM
hello :
Below the SCTPLINK command results.
LST SCTPLNK:SCTPNO=10;
A0036L
+++ A0036L 2015-05-15 09:27:14 DST
O&M #878602
%%/*9229548*/LST SCTPLNK:SCTPNO=10;%%
RETCODE = 0 Operation succeeded.
List SctpLink
-------------
Link No. = 10
Cabinet No. = 0
Subrack No. = 0
Slot No. = 7
Maximum Stream No. = 17
Control Mode = Auto Mode
VRF Index = 0
First Local IP Address = ******133.193
Second Local IP Address = 0.0.0.0
Local SCTP Port No. = 36422
First Peer IP Address = ******138.161
Second Peer IP Address = 0.0.0.0
Peer SCTP Port No. = 36422
RTO Min Value(ms) = 1000
RTO Max Value(ms) = 3000
RTO Initial Value(ms) = 1000
RTO Alpha Value = 12
RTO Beta Value = 25
Heart-beat Interval(ms) = 5000
Max Association Retransmission = 10
Max Path Retransmission = 5
Checksum Arithmetic Type = CRC32
Switch Back Flag = Enable
Heart-beat Times When Switch Back = 10
Block Flag = Unblock
SACK Timeout(ms) = 200
Description Info = eNB:MCC_270 MNC_77 GlobaleNBId_270-77-4374
Auto Config Flag = Auto Created
(Number of results = 1)
--- END
DSP SCTPLNK:SCTPNO=10;
A0036L
+++ A0036L 2015-05-15 09:27:40 DST
O&M #878603
%%/*9230100*/DSP SCTPLNK:SCTPNO=10;%%
RETCODE = 0 Operation succeeded.
DisPlay SctpLink
----------------
Link No. = 10
Cabinet No. = 0
Subrack No. = 0
Slot No. = 7
First Local IP Address = ******.133.193
Second Local IP Address = 0.0.0.0
Local SCTP Port No. = 36422
First Peer IP Address = ******.138.161
Second Peer IP Address = 0.0.0.0
Peer SCTP Port No. = 36422
Out Stream Number = 0
In Stream Number = 0
Work Address Flag = Active Path
Block Flag = Unblock
SCTP Link Status = Down
Status Change Cause = Link Down
Status Change Time = 2015-04-20 18:17:22 DST
(Number of results = 1)
--- END
LST SCTPTEMPLATE:;
A0036L
+++ A0036L 2015-05-15 09:27:52 DST
O&M #878605
%%/*9230244*/LST SCTPTEMPLATE:;%%
RETCODE = 0 Operation succeeded.
List SCTP Parameters Template Configuration
-------------------------------------------
SCTP Parameters Template ID = 0
RTO Min Value(ms) = 1000
RTO Max Value(ms) = 3000
RTO Initial Value(ms) = 1000
RTO Alpha Value = 12
RTO Beta Value = 25
Heart-beat Interval(ms) = 5000
Max Association Retransmission = 10
Max Path Retransmission = 5
Switch Back Flag = Enable
Heart-beat Times When Switch Back = 10
SACK Timeout(ms) = 200
Checksum Arithmetic Type = CRC32
Maximum Stream No. = 17
(Number of results = 1)
--- END
LST GLOBALPROCSWITCH:;
A0036L
+++ A0036L 2015-05-15 09:28:23 DST
O&M #878608
%%/*9230524*/LST GLOBALPROCSWITCH:;%%
RETCODE = 0 Operation succeeded.
List Global Procedure Switch Setting
------------------------------------
The Switch of X2 setup by SON = On
The method of X2 setup by SON = X2SonLink is set up over M2000
SRI adaptive switch = On
LCG Profile = LCG_PROFILE_0
RNC POOL HO RIM Switch = Off
UU Message Simultaneous Sending Switch = Off
Update eNB Configuration Via X2 Switch = Off
X2 Auto Setup Switch Via Target Operator = Off
X2 Son TNL Select Mode = SELECTED_PLMNID
Choose UMTS Cell Load Info Trans Channel = NULL
S1 handover in data forwarding switch = Off
RRC Reest Protect Threshold = 0
The Timer of X2 delete by SON(min) = 1
RIM Coding Policy = PrivateCoding
L2GU Handover Required With LTE Cap Switch = Off
Different Operator With Same MMEC Switch = Off
(Number of results = 1)
--- END
PING:SN=7,SRCIP="****.133.193",DSTIP="*******138.161",CONTPING=DISABLE,APPTIF=NO;
A0036L
PING *******138.161: 32 data bytes
Reply from *******138.161: bytes=32 Sequence=1 ttl=250 time=2 ms
Reply from *******138.161: bytes=32 Sequence=2 ttl=250 time=2 ms
Reply from *******138.161: bytes=32 Sequence=3 ttl=250 time=2 ms
Reply from *******138.161: bytes=32 Sequence=4 ttl=250 time=1 ms
--- *******138.161 ping statistics ---
4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 1/1/2 ms
13 reports in total
--- END
Total: 13 packet(s) received.
LST SCTPLNK:SCTPNO=5;
A0374L
+++ A0374L 2015-05-15 09:20:23 DST
O&M #239953
%%/*9224610*/LST SCTPLNK:SCTPNO=5;%%
RETCODE = 0 Operation succeeded.
List SctpLink
-------------
Link No. = 5
Cabinet No. = 0
Subrack No. = 0
Slot No. = 7
Maximum Stream No. = 17
Control Mode = Auto Mode
VRF Index = 0
First Local IP Address = ********138.161
Second Local IP Address = 0.0.0.0
Local SCTP Port No. = 36422
First Peer IP Address = ********133.193
Second Peer IP Address = 0.0.0.0
Peer SCTP Port No. = 36422
RTO Min Value(ms) = 1000
RTO Max Value(ms) = 3000
RTO Initial Value(ms) = 1000
RTO Alpha Value = 12
RTO Beta Value = 25
Heart-beat Interval(ms) = 5000
Max Association Retransmission = 10
Max Path Retransmission = 5
Checksum Arithmetic Type = CRC32
Switch Back Flag = Enable
Heart-beat Times When Switch Back = 10
Block Flag = Unblock
SACK Timeout(ms) = 200
Description Info = X2ENODEBID_37_MCC_270_MNC_77
Auto Config Flag = Auto Created
(Number of results = 1)
--- END
DSP SCTPLNK:SCTPNO=5;
A0374L
+++ A0374L 2015-05-15 09:20:35 DST
O&M #239956
%%/*9224838*/DSP SCTPLNK:SCTPNO=5;%%
RETCODE = 0 Operation succeeded.
DisPlay SctpLink
----------------
Link No. = 5
Cabinet No. = 0
Subrack No. = 0
Slot No. = 7
First Local IP Address = ********138.161
Second Local IP Address = 0.0.0.0
Local SCTP Port No. = 36422
First Peer IP Address = ********133.193
Second Peer IP Address = 0.0.0.0
Peer SCTP Port No. = 36422
Out Stream Number = 0
In Stream Number = 0
Work Address Flag = Active Path
Block Flag = Unblock
SCTP Link Status = Down
Status Change Cause = Initial
Status Change Time = 2015-05-11 14:21:21 DST
(Number of results = 1)
--- END
LST SCTPTEMPLATE:;
A0374L
+++ A0374L 2015-05-15 09:21:21 DST
O&M #239959
%%/*9225000*/LST SCTPTEMPLATE:;%%
RETCODE = 0 Operation succeeded.
List SCTP Parameters Template Configuration
-------------------------------------------
SCTP Parameters Template ID = 0
RTO Min Value(ms) = 1000
RTO Max Value(ms) = 3000
RTO Initial Value(ms) = 1000
RTO Alpha Value = 12
RTO Beta Value = 25
Heart-beat Interval(ms) = 5000
Max Association Retransmission = 10
Max Path Retransmission = 5
Switch Back Flag = Enable
Heart-beat Times When Switch Back = 10
SACK Timeout(ms) = 200
Checksum Arithmetic Type = CRC32
Maximum Stream No. = 17
(Number of results = 1)
--- END
LST GLOBALPROCSWITCH:;
A0374L
+++ A0374L 2015-05-15 09:21:51 DST
O&M #239964
%%/*9225284*/LST GLOBALPROCSWITCH:;%%
RETCODE = 0 Operation succeeded.
List Global Procedure Switch Setting
------------------------------------
The Switch of X2 setup by SON = On
The method of X2 setup by SON = X2SonLink is set up over M2000
SRI adaptive switch = On
LCG Profile = LCG_PROFILE_0
RNC POOL HO RIM Switch = Off
UU Message Simultaneous Sending Switch = Off
Update eNB Configuration Via X2 Switch = Off
X2 Auto Setup Switch Via Target Operator = Off
X2 Son TNL Select Mode = SELECTED_PLMNID
Choose UMTS Cell Load Info Trans Channel = NULL
S1 handover in data forwarding switch = Off
RRC Reest Protect Threshold = 0
The Timer of X2 delete by SON(min) = 1
RIM Coding Policy = PrivateCoding
L2GU Handover Required With LTE Cap Switch = Off
Different Operator With Same MMEC Switch = Off
(Number of results = 1)
--- END
PING:SN=7,SRCIP="********138.161",DSTIP="********133.193",CONTPING=DISABLE,APPTIF=NO;
A0374L
PING ********133.193: 32 data bytes
Reply from ********133.193: bytes=32 Sequence=1 ttl=251 time=1 ms
Reply from ********133.193: bytes=32 Sequence=2 ttl=251 time=2 ms
Reply from ********133.193: bytes=32 Sequence=3 ttl=251 time=1 ms
Reply from ********133.193: bytes=32 Sequence=4 ttl=251 time=1 ms
--- ********133.193 ping statistics ---
4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 1/1/2 ms
13 reports in total
--- END
Total: 13 packet(s) received.
Below the SCTPLINK command results.
LST SCTPLNK:SCTPNO=10;
A0036L
+++ A0036L 2015-05-15 09:27:14 DST
O&M #878602
%%/*9229548*/LST SCTPLNK:SCTPNO=10;%%
RETCODE = 0 Operation succeeded.
List SctpLink
-------------
Link No. = 10
Cabinet No. = 0
Subrack No. = 0
Slot No. = 7
Maximum Stream No. = 17
Control Mode = Auto Mode
VRF Index = 0
First Local IP Address = ******133.193
Second Local IP Address = 0.0.0.0
Local SCTP Port No. = 36422
First Peer IP Address = ******138.161
Second Peer IP Address = 0.0.0.0
Peer SCTP Port No. = 36422
RTO Min Value(ms) = 1000
RTO Max Value(ms) = 3000
RTO Initial Value(ms) = 1000
RTO Alpha Value = 12
RTO Beta Value = 25
Heart-beat Interval(ms) = 5000
Max Association Retransmission = 10
Max Path Retransmission = 5
Checksum Arithmetic Type = CRC32
Switch Back Flag = Enable
Heart-beat Times When Switch Back = 10
Block Flag = Unblock
SACK Timeout(ms) = 200
Description Info = eNB:MCC_270 MNC_77 GlobaleNBId_270-77-4374
Auto Config Flag = Auto Created
(Number of results = 1)
--- END
DSP SCTPLNK:SCTPNO=10;
A0036L
+++ A0036L 2015-05-15 09:27:40 DST
O&M #878603
%%/*9230100*/DSP SCTPLNK:SCTPNO=10;%%
RETCODE = 0 Operation succeeded.
DisPlay SctpLink
----------------
Link No. = 10
Cabinet No. = 0
Subrack No. = 0
Slot No. = 7
First Local IP Address = ******.133.193
Second Local IP Address = 0.0.0.0
Local SCTP Port No. = 36422
First Peer IP Address = ******.138.161
Second Peer IP Address = 0.0.0.0
Peer SCTP Port No. = 36422
Out Stream Number = 0
In Stream Number = 0
Work Address Flag = Active Path
Block Flag = Unblock
SCTP Link Status = Down
Status Change Cause = Link Down
Status Change Time = 2015-04-20 18:17:22 DST
(Number of results = 1)
--- END
LST SCTPTEMPLATE:;
A0036L
+++ A0036L 2015-05-15 09:27:52 DST
O&M #878605
%%/*9230244*/LST SCTPTEMPLATE:;%%
RETCODE = 0 Operation succeeded.
List SCTP Parameters Template Configuration
-------------------------------------------
SCTP Parameters Template ID = 0
RTO Min Value(ms) = 1000
RTO Max Value(ms) = 3000
RTO Initial Value(ms) = 1000
RTO Alpha Value = 12
RTO Beta Value = 25
Heart-beat Interval(ms) = 5000
Max Association Retransmission = 10
Max Path Retransmission = 5
Switch Back Flag = Enable
Heart-beat Times When Switch Back = 10
SACK Timeout(ms) = 200
Checksum Arithmetic Type = CRC32
Maximum Stream No. = 17
(Number of results = 1)
--- END
LST GLOBALPROCSWITCH:;
A0036L
+++ A0036L 2015-05-15 09:28:23 DST
O&M #878608
%%/*9230524*/LST GLOBALPROCSWITCH:;%%
RETCODE = 0 Operation succeeded.
List Global Procedure Switch Setting
------------------------------------
The Switch of X2 setup by SON = On
The method of X2 setup by SON = X2SonLink is set up over M2000
SRI adaptive switch = On
LCG Profile = LCG_PROFILE_0
RNC POOL HO RIM Switch = Off
UU Message Simultaneous Sending Switch = Off
Update eNB Configuration Via X2 Switch = Off
X2 Auto Setup Switch Via Target Operator = Off
X2 Son TNL Select Mode = SELECTED_PLMNID
Choose UMTS Cell Load Info Trans Channel = NULL
S1 handover in data forwarding switch = Off
RRC Reest Protect Threshold = 0
The Timer of X2 delete by SON(min) = 1
RIM Coding Policy = PrivateCoding
L2GU Handover Required With LTE Cap Switch = Off
Different Operator With Same MMEC Switch = Off
(Number of results = 1)
--- END
PING:SN=7,SRCIP="****.133.193",DSTIP="*******138.161",CONTPING=DISABLE,APPTIF=NO;
A0036L
PING *******138.161: 32 data bytes
Reply from *******138.161: bytes=32 Sequence=1 ttl=250 time=2 ms
Reply from *******138.161: bytes=32 Sequence=2 ttl=250 time=2 ms
Reply from *******138.161: bytes=32 Sequence=3 ttl=250 time=2 ms
Reply from *******138.161: bytes=32 Sequence=4 ttl=250 time=1 ms
--- *******138.161 ping statistics ---
4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 1/1/2 ms
13 reports in total
--- END
Total: 13 packet(s) received.
LST SCTPLNK:SCTPNO=5;
A0374L
+++ A0374L 2015-05-15 09:20:23 DST
O&M #239953
%%/*9224610*/LST SCTPLNK:SCTPNO=5;%%
RETCODE = 0 Operation succeeded.
List SctpLink
-------------
Link No. = 5
Cabinet No. = 0
Subrack No. = 0
Slot No. = 7
Maximum Stream No. = 17
Control Mode = Auto Mode
VRF Index = 0
First Local IP Address = ********138.161
Second Local IP Address = 0.0.0.0
Local SCTP Port No. = 36422
First Peer IP Address = ********133.193
Second Peer IP Address = 0.0.0.0
Peer SCTP Port No. = 36422
RTO Min Value(ms) = 1000
RTO Max Value(ms) = 3000
RTO Initial Value(ms) = 1000
RTO Alpha Value = 12
RTO Beta Value = 25
Heart-beat Interval(ms) = 5000
Max Association Retransmission = 10
Max Path Retransmission = 5
Checksum Arithmetic Type = CRC32
Switch Back Flag = Enable
Heart-beat Times When Switch Back = 10
Block Flag = Unblock
SACK Timeout(ms) = 200
Description Info = X2ENODEBID_37_MCC_270_MNC_77
Auto Config Flag = Auto Created
(Number of results = 1)
--- END
DSP SCTPLNK:SCTPNO=5;
A0374L
+++ A0374L 2015-05-15 09:20:35 DST
O&M #239956
%%/*9224838*/DSP SCTPLNK:SCTPNO=5;%%
RETCODE = 0 Operation succeeded.
DisPlay SctpLink
----------------
Link No. = 5
Cabinet No. = 0
Subrack No. = 0
Slot No. = 7
First Local IP Address = ********138.161
Second Local IP Address = 0.0.0.0
Local SCTP Port No. = 36422
First Peer IP Address = ********133.193
Second Peer IP Address = 0.0.0.0
Peer SCTP Port No. = 36422
Out Stream Number = 0
In Stream Number = 0
Work Address Flag = Active Path
Block Flag = Unblock
SCTP Link Status = Down
Status Change Cause = Initial
Status Change Time = 2015-05-11 14:21:21 DST
(Number of results = 1)
--- END
LST SCTPTEMPLATE:;
A0374L
+++ A0374L 2015-05-15 09:21:21 DST
O&M #239959
%%/*9225000*/LST SCTPTEMPLATE:;%%
RETCODE = 0 Operation succeeded.
List SCTP Parameters Template Configuration
-------------------------------------------
SCTP Parameters Template ID = 0
RTO Min Value(ms) = 1000
RTO Max Value(ms) = 3000
RTO Initial Value(ms) = 1000
RTO Alpha Value = 12
RTO Beta Value = 25
Heart-beat Interval(ms) = 5000
Max Association Retransmission = 10
Max Path Retransmission = 5
Switch Back Flag = Enable
Heart-beat Times When Switch Back = 10
SACK Timeout(ms) = 200
Checksum Arithmetic Type = CRC32
Maximum Stream No. = 17
(Number of results = 1)
--- END
LST GLOBALPROCSWITCH:;
A0374L
+++ A0374L 2015-05-15 09:21:51 DST
O&M #239964
%%/*9225284*/LST GLOBALPROCSWITCH:;%%
RETCODE = 0 Operation succeeded.
List Global Procedure Switch Setting
------------------------------------
The Switch of X2 setup by SON = On
The method of X2 setup by SON = X2SonLink is set up over M2000
SRI adaptive switch = On
LCG Profile = LCG_PROFILE_0
RNC POOL HO RIM Switch = Off
UU Message Simultaneous Sending Switch = Off
Update eNB Configuration Via X2 Switch = Off
X2 Auto Setup Switch Via Target Operator = Off
X2 Son TNL Select Mode = SELECTED_PLMNID
Choose UMTS Cell Load Info Trans Channel = NULL
S1 handover in data forwarding switch = Off
RRC Reest Protect Threshold = 0
The Timer of X2 delete by SON(min) = 1
RIM Coding Policy = PrivateCoding
L2GU Handover Required With LTE Cap Switch = Off
Different Operator With Same MMEC Switch = Off
(Number of results = 1)
--- END
PING:SN=7,SRCIP="********138.161",DSTIP="********133.193",CONTPING=DISABLE,APPTIF=NO;
A0374L
PING ********133.193: 32 data bytes
Reply from ********133.193: bytes=32 Sequence=1 ttl=251 time=1 ms
Reply from ********133.193: bytes=32 Sequence=2 ttl=251 time=2 ms
Reply from ********133.193: bytes=32 Sequence=3 ttl=251 time=1 ms
Reply from ********133.193: bytes=32 Sequence=4 ttl=251 time=1 ms
--- ********133.193 ping statistics ---
4 packet(s) transmitted
4 packet(s) received
Percent 0.00 packet lost
round-trip min/avg/max = 1/1/2 ms
13 reports in total
--- END
Total: 13 packet(s) received.