View Full Version : Question TMA Configuration
justdream
2015-04-23, 08:24 PM
Dears,
Which Parameters I've to configure when I add 2G/3G TMA?
bluep
2015-04-24, 11:09 AM
Very simple, in my 2G ALU System :
adding DC current threshold ( min-max in mA ), Loss feeder estimate, loss Tx TMA and TMA Gain
Then restart equipments again
bluep
2015-04-24, 12:24 PM
IN Huwei : TMA setting
justdream
2015-04-24, 04:44 PM
IN Huwei : TMA setting
Gooood, Do you have same for 3G Please
sonerss
2015-06-28, 06:37 PM
First you have to enter "SCN ALD" command in NodeB side, after then it gives you a serial number of antennas and tma
After then you can enter commands which show in below.
MOD ANTENNAPORT: CN=0, SRN=4, SN=0, PN=R0A, PWRSWITCH=ON;
ADD TMA: DEVICENO=40, DEVICENAME="DTMA40", CTRLCN=0, CTRLSRN=4, CTRLSN=0, SUBUNITNUM=2;,VENDORCODE="HW",SERIALNO="";
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.