leonas666
2014-12-06, 01:21 AM
Hello,
I'm new in dongle emulating solutions. I have emulated SafeNet HASP dongle with multikey 18.1.0 version on Win 7 x64. It works fine.
Now I'm trying to emulate SafeNet SuperPRO dongle and having issues with it. Looks like I have followed all instructions found in forum, but software still does not recognise virtual dongle... In device manager appear new device, with no errors under usb controllers.
I have used PVA 3.3 to dump dongle, got *.dmp file.
Solved it with dmp2mkey 2.5.9.1.
I have tried to emulate obtained file with Multikey 18.0.3, 18.1.0 versions on Win 7x64. And with Multikey 18.0.3, 18.1.0, 19.1.8, 20 versions on WinXP x32.
Have tried to change cell57 to 3.
I'm using Sentinel drivers 7.5.8.
could it be conversation problem?
can somebody take a look, I would be very thankful.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\00007132]
"DongleType"=dword:00000003
"Copyright"="None"
"Created"="Thu Dec 04 18:55:00.625 2014 by dmp2mkey v2.5.9.1"
"Name"="7132 Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
03,03,03,03,01,01,00,01,\
03,03,00,00,00,00,00,00,\
00,02,01,01,00,00,00,00,\
01,01,01,01,01,01,00,01,\
00,00,00,00,00,00,00,00,\
01,01,01,01,01,01,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
7E,BA,32,71,00,00,00,00,00,00,00,00,1B,C0,00,00,\
A6,9F,09,C3,EF,8A,CC,F0,00,09,00,00,00,00,FD,D8,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
95,78,00,10,02,00,1F,00,69,52,C4,5D,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,04,A0,0F,1A,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
dmp file - https://jumpshare.com/b/yfUHDhqugtvyFcBJf8gs
I'm new in dongle emulating solutions. I have emulated SafeNet HASP dongle with multikey 18.1.0 version on Win 7 x64. It works fine.
Now I'm trying to emulate SafeNet SuperPRO dongle and having issues with it. Looks like I have followed all instructions found in forum, but software still does not recognise virtual dongle... In device manager appear new device, with no errors under usb controllers.
I have used PVA 3.3 to dump dongle, got *.dmp file.
Solved it with dmp2mkey 2.5.9.1.
I have tried to emulate obtained file with Multikey 18.0.3, 18.1.0 versions on Win 7x64. And with Multikey 18.0.3, 18.1.0, 19.1.8, 20 versions on WinXP x32.
Have tried to change cell57 to 3.
I'm using Sentinel drivers 7.5.8.
could it be conversation problem?
can somebody take a look, I would be very thankful.
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\MultiKey\Dumps\00007132]
"DongleType"=dword:00000003
"Copyright"="None"
"Created"="Thu Dec 04 18:55:00.625 2014 by dmp2mkey v2.5.9.1"
"Name"="7132 Sentinel SuperPro Dump"
"Type"=dword:00000000
"CellType"=hex:\
01,01,03,03,03,01,03,01,\
03,03,03,03,01,01,00,01,\
03,03,00,00,00,00,00,00,\
00,02,01,01,00,00,00,00,\
01,01,01,01,01,01,00,01,\
00,00,00,00,00,00,00,00,\
01,01,01,01,01,01,00,00,\
00,00,00,00,00,00,00,00
"sntMemory"=hex:\
7E,BA,32,71,00,00,00,00,00,00,00,00,1B,C0,00,00,\
A6,9F,09,C3,EF,8A,CC,F0,00,09,00,00,00,00,FD,D8,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
95,78,00,10,02,00,1F,00,69,52,C4,5D,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,\
00,00,00,00,00,00,00,00,04,A0,0F,1A,00,00,00,00,\
00,00,00,00,00,00,00,00,00,00,00,00,00,00,00,00
dmp file - https://jumpshare.com/b/yfUHDhqugtvyFcBJf8gs