gaz_0001
2014-12-02, 01:01 AM
I have an issue with GBoIP on 2G NSN FlexiBSC.
Unableto get all the NS-VL's working.
PSE-01 NSE-51110
================
LOCAL UDP PORT: 50002
NSE STATUS: TRAFFIC ALLOWED
NSE PFC MODE: OFF
NSE NRI LIST (BINARY/DECIMAL):
0010110000/176
0011010000/208
0011110000/240
NSE NRI MASK: 1111110000
PRE CONFIGURED NS-VL:
REMOTE REMOTE
ID NAME IP ADDRESS UDP PORT
----- ---------- --------------- --------
00110 MME01_2 10.64.64.91 63488
REMOTE HOST NAME:
DYNAMIC CONFIGURED NS-VL(S):
OP REMOTE REMOTE
ID STATE RDW RSW IP ADDRESS UDP PORT
----- ----- --- --- --------------- --------
00127 WO-EX 001 001 10.64.64.91 63488
00128 WO/BL 001 001 10.64.64.91 63489
00129 WO/BL 001 001 10.64.64.91 63490
00130 WO-EX 001 001 10.64.64.91 63491
PCU(S) HAVING BLOCKED STATE NS-VL(S):
BCSU-1 PCU-4 BCSU-2 PCU-4
PSE-01 NSE-51111
================
LOCAL UDP PORT: 50004
NSE STATUS: TRAFFIC ALLOWED
NSE PFC MODE: OFF
NSE NRI LIST (BINARY/DECIMAL):
0101010000/336
0101110000/368
0110010000/400
NSE NRI MASK: 1111110000
PRE CONFIGURED NS-VL:
REMOTE REMOTE
ID NAME IP ADDRESS UDP PORT
----- ---------- --------------- --------
00210 MME02_2 10.64.64.65 63488
REMOTE HOST NAME:
DYNAMIC CONFIGURED NS-VL(S):
OP REMOTE REMOTE
ID STATE RDW RSW IP ADDRESS UDP PORT
----- ----- --- --- --------------- --------
00227 WO-EX 001 001 10.64.64.65 63488
00228 WO/BL 001 001 10.64.64.65 63489
00229 WO/BL 001 001 10.64.64.65 63490
00230 WO/BL 001 001 10.64.64.65 63491
PCU(S) HAVING BLOCKED STATE NS-VL(S):
BCSU-1 PCU-4 BCSU-2 PCU-4
As you can see, i have NS-VL's blocked on both of my links.
I already checked my configuration IP. Its good. I have full IP connectivity to the RIP of the SGSN MME.
I checked my config already on SGSN MME. Again its good.
Problem is on BSC side.
I can build the exact same configuration as this, using the same ports, IP, NSEI etc etc from another BSC and all NS-VL come up.
Strange issue, where if i change my local UDP port i actually get varying NS-VL's working. I can get anything from 0 to 3.....but never all 4.
This config is a working config. Issue has arisen over night....i see no changes on BSC, SGSN MME or IP Transport during this period.
Any ideas?
Unableto get all the NS-VL's working.
PSE-01 NSE-51110
================
LOCAL UDP PORT: 50002
NSE STATUS: TRAFFIC ALLOWED
NSE PFC MODE: OFF
NSE NRI LIST (BINARY/DECIMAL):
0010110000/176
0011010000/208
0011110000/240
NSE NRI MASK: 1111110000
PRE CONFIGURED NS-VL:
REMOTE REMOTE
ID NAME IP ADDRESS UDP PORT
----- ---------- --------------- --------
00110 MME01_2 10.64.64.91 63488
REMOTE HOST NAME:
DYNAMIC CONFIGURED NS-VL(S):
OP REMOTE REMOTE
ID STATE RDW RSW IP ADDRESS UDP PORT
----- ----- --- --- --------------- --------
00127 WO-EX 001 001 10.64.64.91 63488
00128 WO/BL 001 001 10.64.64.91 63489
00129 WO/BL 001 001 10.64.64.91 63490
00130 WO-EX 001 001 10.64.64.91 63491
PCU(S) HAVING BLOCKED STATE NS-VL(S):
BCSU-1 PCU-4 BCSU-2 PCU-4
PSE-01 NSE-51111
================
LOCAL UDP PORT: 50004
NSE STATUS: TRAFFIC ALLOWED
NSE PFC MODE: OFF
NSE NRI LIST (BINARY/DECIMAL):
0101010000/336
0101110000/368
0110010000/400
NSE NRI MASK: 1111110000
PRE CONFIGURED NS-VL:
REMOTE REMOTE
ID NAME IP ADDRESS UDP PORT
----- ---------- --------------- --------
00210 MME02_2 10.64.64.65 63488
REMOTE HOST NAME:
DYNAMIC CONFIGURED NS-VL(S):
OP REMOTE REMOTE
ID STATE RDW RSW IP ADDRESS UDP PORT
----- ----- --- --- --------------- --------
00227 WO-EX 001 001 10.64.64.65 63488
00228 WO/BL 001 001 10.64.64.65 63489
00229 WO/BL 001 001 10.64.64.65 63490
00230 WO/BL 001 001 10.64.64.65 63491
PCU(S) HAVING BLOCKED STATE NS-VL(S):
BCSU-1 PCU-4 BCSU-2 PCU-4
As you can see, i have NS-VL's blocked on both of my links.
I already checked my configuration IP. Its good. I have full IP connectivity to the RIP of the SGSN MME.
I checked my config already on SGSN MME. Again its good.
Problem is on BSC side.
I can build the exact same configuration as this, using the same ports, IP, NSEI etc etc from another BSC and all NS-VL come up.
Strange issue, where if i change my local UDP port i actually get varying NS-VL's working. I can get anything from 0 to 3.....but never all 4.
This config is a working config. Issue has arisen over night....i see no changes on BSC, SGSN MME or IP Transport during this period.
Any ideas?