View Full Version : Question EDGE issue
haider79
2014-11-07, 08:20 PM
Dear Experts,
Appreciate if you let me know what parameter makes me sure that this cell (A) is having EGPRS enabled and cell (B) is having only GPRS? in E******* Network.
Many thanks,
Haider
firstmaxim
2014-11-07, 08:29 PM
Dear Experts,
Appreciate if you let me know what parameter makes me sure that this cell (A) is having EGPRS enabled and cell (B) is having only GPRS? in E******* Network.
Many thanks,
Haider
SIB 13 is for GPRS
electron
2014-11-07, 09:15 PM
Dear Experts,
Appreciate if you let me know what parameter makes me sure that this cell (A) is having EGPRS enabled and cell (B) is having only GPRS? in E******* Network.
Many thanks,
Haider
hi,
use command rlgsp:cell=XXX;
Cheers
peanut
2014-11-10, 02:47 AM
Dears,
Is there a way to check if I'm on GPRS or on EDGE by drive test signalling, only?
BR,
electron
2014-11-10, 02:53 AM
Dears,
Is there a way to check if I'm on GPRS or on EDGE by drive test signalling, only?
BR,
Hi ,
Yes, just simply check coding scheme assigned while you are having PS activity. If it is CS1 up to CS4 it means you are getting served by GPRS and if it is MCS1 up to MCS9 it means you are getting served by EGPRS
Cheers
Alfabakar
2014-11-10, 10:04 PM
hi
please just print the command rlcrp:cell=A; you should see under 64K=EGPRS and under USE=GPRS that show you that some users attached to the cell A are making EGPRS
haider79
2014-11-12, 03:31 PM
Dears,
Appreciated, can i filter in CDD on all EGPRS cells and which parameter?
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.