kondoros
2014-09-07, 11:49 PM
I have this information and i would like to share it with you.
MOTOTRBO codeplug password recovery :
- Use wireshark.
- Start the cps, and start wireshark.
- Select the port the radio is connected to, and start wireshark recording / sniffing
- Read the radio, until it gets to the password input box.
- Go to wireshark and stop the recording
- Sift through the large data packet. It should be one of the last few sniffed if you stopped wireshark shortly after the password box came up
- You are looking for a word or numbers with full stops in between - so a password of 'password' would be displayed in wireshark as p.a.s.s.w.o.r.d
- It's usually just before the radio name, so if you are reading a display radio, then its very easy, just look at the display when you turn it on, and look for that in the wireshark dump.
I hope this tip may save you some time by avoiding complete reprogramming, enjoy ...
MOTOTRBO codeplug password recovery :
- Use wireshark.
- Start the cps, and start wireshark.
- Select the port the radio is connected to, and start wireshark recording / sniffing
- Read the radio, until it gets to the password input box.
- Go to wireshark and stop the recording
- Sift through the large data packet. It should be one of the last few sniffed if you stopped wireshark shortly after the password box came up
- You are looking for a word or numbers with full stops in between - so a password of 'password' would be displayed in wireshark as p.a.s.s.w.o.r.d
- It's usually just before the radio name, so if you are reading a display radio, then its very easy, just look at the display when you turn it on, and look for that in the wireshark dump.
I hope this tip may save you some time by avoiding complete reprogramming, enjoy ...