Is Genex Prob 3.6 Support Samsung S4 i9505 ??

[kkyasir]

Anyone using Genex Prob 3.6 with Samsung Galaxy S4 i9505 ?????

[TEMS]

yes it support with Samsung S4 I9505

[kkyasir]

yes it support with Samsung S4 I9505


Dear Prob will detect/connect it automatically or we need special settings for it, as i9505 is not listed in its compatible devices..

[GEZA]

Dear Prob will detect/connect it automatically or we need special settings for it, as i9505 is not listed in its compatible devices..
for connecting Samsung i9505 with Probe, you need to do following steps:
1. install samsung driver: find it from samsung website
2. open qualcomm diag. port by press: *#0808#, then select DM+MODEM+ADB;
3. in Probe, chose Qualcomm MSM8260 as the Model, then you can get dt logs.

[kkyasir]

for connecting Samsung i9505 with Probe, you need to do following steps:
1. install samsung driver: find it from samsung website
2. open qualcomm diag. port by press: *#0808#, then select DM+MODEM+ADB;
3. in Probe, chose Qualcomm MSM8260 as the Model, then you can get dt logs.

Thanks Dear for your helpful feedback , i tried Samsung Galaxy S5 also with same procedure and its also working with Prob.

[TEMS]

yes is work with S5 also, but some parameter have missing.

[Cepillo]

Hi!
Does Probe 3.6 support E5331 or E3236 3G modems? These modems are not from the list of compatible devices.

[Cepillo]

Hi, expert!
Could you provide the same step-by-step for Huawei U9200?
I cannot get COM ports after connection to laptop.

[equipment.best]

for connecting Samsung i9505 with Probe, you need to do following steps:
1. install samsung driver: find it from samsung website
2. open qualcomm diag. port by press: *#0808#, then select DM+MODEM+ADB;
3. in Probe, chose Qualcomm MSM8260 as the Model, then you can get dt logs.
-------------------
i don't know why select DM+MODEM+ADB ?
why don't select RMNET+DOMEN+ADB ?
anyone test FTP ? I think voice no probem
but if select DM+DOMEM+ADB , maybe FTP speed low then RMNET+MODEM+ADB ?

[baby2]

for connecting Samsung i9505 with Probe, you need to do following steps:
1. install samsung driver: find it from samsung website
2. open qualcomm diag. port by press: *#0808#, then select DM+MODEM+ADB;
3. in Probe, chose Qualcomm MSM8260 as the Model, then you can get dt logs.

working good ,well done

[softice32]

-------------------
i don't know why select DM+MODEM+ADB ?
why don't select RMNET+DOMEN+ADB ?
anyone test FTP ? I think voice no probem
but if select DM+DOMEM+ADB , maybe FTP speed low then RMNET+MODEM+ADB ?

in my experience i'm agree using RMNET+MODEM+ADB is way better :)

[atit]

Dears

I did same steps that our admin mentioned but handset not connected ?

BR

[TeleOPT]

Dear all
Anyone using Genex Prob 3.6 with Samsung Galaxy S3 i9300 ?
BRS

[Cepillo]

Does somebody have any expirience on HUAWEI E3251 (DC-HSPA)?