View Full Version : Original Handover Parameter Threshold
Handover decision is based on the following parameters
• Received signal quality
• Received signal strength
• Distance of MS from BTS
• Drops below power budget margin
• Interference
So What are the Threshold for this above parameter of Huawei System for good Handover can anyone explain me.
AhmadE
2015-02-01, 11:40 PM
Dear Biku (http://www.finetopix.com/member.php?54185-Biku),
the parameters are as following:
-Received signal quality: BQ HO Margin, UL/DL Quality Threshold
Received signal strength: Edge HO W/V, Edge HO UL/DL Rx_lev Threshold
Distance of MS from BTS: TA W/V and TA Threshold
Drops below power budget margin : what you mean by "Drops below Power"??
Interference : RxLevOff, and RxQualn
it's recommend to use the Huawei recommendations
Handover decision is based on the following parameters
• Received signal quality
• Received signal strength
• Distance of MS from BTS
• Drops below power budget margin
• Interference
So What are the Threshold for this above parameter of Huawei System for good Handover can anyone explain me.
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.