PDA

View Full Version : FAJ1211334 Improved CE ladder for E-DCH benchmark



electron
2014-06-09, 01:47 PM
Hi ,


Did any body tried E/// feature "FAJ1211334 Improved CE ladder for E-DCH" ? Any improvement or benchmark result to share ?



Cheers

auto_art
2014-06-10, 07:21 PM
dear pl. find below the snapshot of one RNC.. where it was activatted.

1. Improved CE Ladder for E-DCH :
This feature provides double CE efficiency for Enhanced Uplink users. The improvement is valid for both low rate, and high rate, Enhanced Uplink users on 2 ms TTI and 10 ms TTI.

Highlights:
1. Overall average CE Utilisation UL reduced by 45 to 50 % in RNC RS
2. Improved CE Ladder for E-DCH is default basic feature in other Vendors
3. Feature shall be able offset the increase in CE Utilisation post implementation of HSUPA 2ms TTI.

35872

fon909
2014-06-10, 11:25 PM
Yes, Indeed as shown above there is a good improvement in UL CE utilization post implementation of this feature. The same was observed in 'Improved CE Ladder' feature.

luganomu
2014-10-25, 03:09 PM
I would like to see EUL accessiblity after CEL ladder

djodji
2014-10-31, 11:29 PM
We implemented this feature on some sites and I can confirm that we get improvement in UL CE after implementation of this feature.

rumy
2014-11-04, 03:41 AM
How does it performs compared with CE Overbooking? any degradation on Thr?

scorpion
2014-11-04, 03:00 PM
How does it performs compared with CE Overbooking? any degradation on Thr?

This good point...what is the pre post observation on ...

UL - Thr
Overall Latency

If you have some pictures please share....