Atoll my coverage not full area after prodic on map

[lotto009]

Dear Sir
As I planing UMTS and LTE on Atoll my coverage not full area and continual on the map
-I set max rage at Transmitter>Perperty>max rang already
Please help advisor
Best regards35796:Q

[yurii]

Hi lotto009, it seems that you ve do predictions and after zoom out ( your prediction was done in another scale )

[Jerry]

Check the calculation radius and increase it if you need.

[william.dg08]

Dear Sir
As I planing UMTS and LTE on Atoll my coverage not full area and continual on the map
-I set max rage at Transmitter>Perperty>max rang already
Please help advisor
Best regards35796:Q

Hi , you have to check the "CALCULATION AREA" and "FOCUS AREA" , try to expand these areas.

W/

[william.dg08]

You can find the user manual here:
http://search.4shared.com/postDownload/3SNl9nYM/312-User.html

W/

[lotto009]

Dear all
After I edit click right trasmisster adn change propogation to Hata modul and radius as your suggest above can predic full area krab
Thank yuo for your kindly support anything God keep Youuuu allll
Best regards
lotto009

[lotto009]

Dear I have one question
I have 2000 cell for predic after I predic why it slowlyyyyyy past 2day can not success :'((if i plot 50 cell just ok so fast)
OK I know if have many cell must be so long time to predic Anyone can suggestion
-What 's parameter I will be set to so fast more than 2 day (just mean used 1day for predic)
Hlep me :Q

[Jerry]

It depends on other like your PC CPU, memory resources, geo calculation zone, your settings but not only number of cells.

here my reccomends:
- calculation radius: minimize the calculation radius will speed up the calculation time. Of course you should maintain it large enough to predic your expected coverage. You can calculate the distance from each cell to nearest site to minimize the calculation radius.
- calculation resolution: less resolution will give less time but less accuracy.
- memory resource: adding more RAM. If you have more then 4G RAM you should upgrade to x64.
- CPU: upgrade your PC.
- Separate the calculation zone into smaller zones. of course you need to repeat the calculation for each smaller zones.

Hope these help.

[kimjosh]

good day to all,hoping that some body could help me with my ATOLL error,if i'm going to enter site info to the transmitter table,like antenna heights,azimuth,there is an error "Value 0 is Invalid".hoping for a possible response coming from you guys.
Thanks in advance,More power.

[lotto009]

Hu just just test put one site after that Tab trasmitter- click right table -and export to csv -Open and copy tamplate just 'OK -after that you can import via csv you transmiitter Enjoy

[oxcnvn]

Dear !
that's wrong in range , and range ext.
if you want show full , increment range of cell.