View Full Version : How to improve Better cell Handover failure in 2G in Huawei?
souravnandi
2014-05-20, 06:46 PM
We have implemented Handover Algorithm II in our network.
I found that most of the cells which have poor HOSR are mostly due to poor better cell Handover .
Is there any parameter to improve the same in Huawei system?
Please suggest.
vaampeere
2014-05-20, 07:46 PM
We have implemented Handover Algorithm II in our network.
I found that most of the cells which have poor HOSR are mostly due to poor better cell Handover .
Is there any parameter to improve the same in Huawei system?
Please suggest.
Hi there,
Are your parameters standardised according to Huawei Definition for them?
souravnandi
2014-05-22, 10:07 PM
Most of the parameters are standardised as per huawei recommended and some are modified .
adriansyah
2014-06-09, 04:50 PM
Try to help,
You can retune Min Access Level Offset per neighbor list relation, but it will make "dragging" during drive test.
SHIVAM
2014-06-09, 10:06 PM
You an tune Inter-Cell HO Hysterisis/Adjacent Cell Inter-layer HO Hysteresis to encourage or discourage Better Cell Handovers.
Though Better Cell Handover are most preferable type of HO for Network provided the parameters settings are good ( i.e no ping pong)...so you should check out the reason of HO Fail--> Hw Alarms/BCCH Clash/Wrong Nbr Definitions etc.
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.