View Full Version : Question RTWP Capacity vs other issues
JasonG
2014-04-22, 11:04 PM
Hello;
How can you tell if a high RTWP is a capacity problem or if it is some other issue (hardware,outside interfer)?
pongpang
2014-04-23, 03:32 AM
1.check RTWP hourly trend compare with user number especially HSUPA if RTWP high on low load time, that might be come form external interference.
2.try to do Downlink load simulation(vender H//) to check hardware
3.Up/Down tilt should be effect to external interference
dodotiro
2014-09-10, 10:17 AM
Hello;
How can you tell if a high RTWP is a capacity problem or if it is some other issue (hardware,outside interfer)?
you can read this post
http://www.finetopix.com/showthread.php?35876-Capacity-monitoring-guide-RAN-14&highlight=capacity
Manmadh
2014-09-20, 05:32 PM
Hi JasonG (http://www.finetopix.com/member.php?11706-JasonG),
IF RTWP is not according to HSUPA user no & abnormal in off Peak hours.If all preliminary check are done.
Please go for FFT test to check interference is due to internal or External.
Regards
Manmadh
gunpowder
2014-09-20, 09:43 PM
1.check RTWP hourly trend compare with user number especially HSUPA if RTWP high on low load time, that might be come form external interference.
2.try to do Downlink load simulation(vender H//) to check hardware
3.Up/Down tilt should be effect to external interference
please share how can i perform step 2
Thanks :)
vBulletin® v4.2.5, Copyright ©2000-2024, Jelsoft Enterprises Ltd.