PDA

View Full Version : Question RTWP Capacity vs other issues



JasonG
2014-04-22, 11:04 PM
Hello;
How can you tell if a high RTWP is a capacity problem or if it is some other issue (hardware,outside interfer)?

pongpang
2014-04-23, 03:32 AM
1.check RTWP hourly trend compare with user number especially HSUPA if RTWP high on low load time, that might be come form external interference.
2.try to do Downlink load simulation(vender H//) to check hardware
3.Up/Down tilt should be effect to external interference

dodotiro
2014-09-10, 10:17 AM
Hello;
How can you tell if a high RTWP is a capacity problem or if it is some other issue (hardware,outside interfer)?


you can read this post

http://www.finetopix.com/showthread.php?35876-Capacity-monitoring-guide-RAN-14&highlight=capacity

Manmadh
2014-09-20, 05:32 PM
Hi JasonG (http://www.finetopix.com/member.php?11706-JasonG),

IF RTWP is not according to HSUPA user no & abnormal in off Peak hours.If all preliminary check are done.

Please go for FFT test to check interference is due to internal or External.

Regards
Manmadh

gunpowder
2014-09-20, 09:43 PM
1.check RTWP hourly trend compare with user number especially HSUPA if RTWP high on low load time, that might be come form external interference.
2.try to do Downlink load simulation(vender H//) to check hardware
3.Up/Down tilt should be effect to external interference

please share how can i perform step 2

Thanks :)